-
.
lo pueden descargar de aqui
Added full support for D880
Added full support for L600
Added full support for M110
Added flashing support for P520
Fixed Agere communication bug.
NsPro Drivers updated to avoid conflict with other FTDI devices (JAF)
IMPORTANT!!!
1.Uninstall older NsPro version
2.Delete NsPro folder from C:\Program Files
3.Install new NsPro version
4.Reconnect NsPro box to PC and install drivers.
Added U700, L760 Unlock/IMEI Write using patched flash files.
Flash the phone with patched firmware then unlock/write IMEI with NsPro.
Files are available on Nspro support area.
Read the instructions attached to each file very carefuly
http://rapidshare.com/files/90036982/NsPro_v3.8.5.exe. -
.
Fixed major communication problem
Fixed sw crashing problem
Is highly recomanded to update to last nspro version!!!
Last nspro version is available on NsPro support area,
NsPro official webpage: www.NsTeam.org
and on rapidshare:
http://rapidshare.com/files/90256960/NsPro_v3.8.6.exe. -
.
Added P520 ARMANI full support.
Improved Agere communication protocol.
Fixed L600, P200 flashing bug.
Is highly recomanded to update to last NsPro version to avoid eventual software problems!!!
Last NsPro version is available on official NsPro webpage: www.nsteam.org,
on NsPro support area,
and on rapishare: http://rapidshare.com/files/94079468/NsPro_v3.8.7.exe
To unsubscribe from these announcements, login to the forum and uncheck "Receive forum announcements and important notifications by email." in your profile.
. -
.
NsPro v4.1.0 released:
Added J750, J400, B460, A401 Direct Unlock, Flashing, IMEI Write.
Added full support for B100 and J210.
More updates are on the way
New NsPro version can be found on NsTeam official website: www.nsteam.org
On Rapidshare: http://rapidshare.com/files/122490056/NsPro_v4.1.0.exe
And on NsPro support area.
To unsubscribe from these announcements, login to the forum and uncheck "Receive forum announcements and important notifications by email." in your profile.
You can view the full announcement by following this link:
http://www.nsdongle.com/forum/index.php?topic=7220.0
Regards,
The NsTeam Community Team.
Edited by osirisunlock - 3/8/2009, 18:48. -
.
Added A411, A412, A711 Unlock/IMEI Write using patched flash files.
Flash the phone with patched firmware
then Unlock/Write IMEI with last NsPro version.
Patched files are available on Nspro support area.
Added B110, B110L, M130L full support
Added i450, i550, i560 Read Codes and Direct Unlock support
Last NsPro version is available on official NsTeam webpage: www.nsteam.org
On NsPro support area
And on Rapidshare: http://rapidshare.com/files/125709217/NsPro_v4.2.0.exe
To unsubscribe from these announcements, login to the forum and uncheck "Receive forum announcements and important notifications by email." in your profile.
You can view the full announcement by following this link:
http://www.nsdongle.com/forum/index.php?topic=7366.0. -
.
NsPro v4.3.0 released: !!
Added support for new J700 versions
Added NVM repair for B500, E210, J600, J600E, J610
This function will repair "IMEI 00000000000..." and "User Fault On Illegal Trial" problems
Instructions:
1. Connect powered on phone to NsPro box
2. Go to Service Jobs, tick "Repair NVM"
3. Type S/N from the phone label (under the battery)
4. Click START
If the operation fail, the phone NVM area is totaly damaged.
In this case, flash the phone with NVM file from NsPro support area then try again.
Last NsPro version can be found on official NsTeam webpage: www.nsteam.org
On NsPro support area
And on Rapidshare: http://rapidshare.com/files/133964810/NsPro_v4.3.0.exe
To unsubscribe from these announcements, login to the forum and uncheck "Receive forum announcements and important notifications by email." in your profile.
You can view the full announcement by following this link:
http://www.nsdongle.com/forum/index.php?topic=7690.0
Regards,
The NsTeam Community Team.
Edited by osirisunlock - 3/8/2009, 18:53. -
.
-Added B300, C500, E215, E251, P180, A517, B130, F400, F480, F490, L810, U800, U900 support.
-Added support for new J600 versions
-Improved qualcomm flashing protocol
Introduction
NsPro 5 delivers a new user experience by providing a brand new interface that makes you more productive. The new version is localized in several of the most used languages, brings a new help system, allows you to log all the operations you do, notifies you when an operation is done and delivers phone information and hints all the time.
Below is a description of the new NsPro features.
Workflow
The new interface brings a new 5 steps work flow design to ease your work especially when you must perform different commands on the same model, and even more when you have to perform the same command (such as unlock) on the same model.
The 5 work steps are:
1. Select Model: you cannot do anything in NsPro until you select a model. Once a model is selected you can execute commands (unlock, flashing, etc.). At any step you can return to this page and change the model. The Change Model button on the left allows you to just directly to this step at any time.
2. Select Command: at this step you can select a command to run (the same available in previous versions):
Read info: read locks, IMEI, BT address, etc.
Write IMEI: change the IMEI of the phone
Unlock: direct unlock of the phone
Lock: lock the phone on a network
Flashing: rewrite the software on the phone
Service Jobs: perform additional services on the phone
3. Command Details: for most of the commands you have to provide additional options or parameters; for instance you must enter an IMEI to write on the phone, or paths to the files to write to the phone.
4. Execute: you execute the command and get an indication of the progress and status of the operation; you can stop the operation at any time (some commands will not stop immediately). When the operation is done the Next button is enabled and you can navigate to the last step.
5. Done: the command you executed is finished and now you can choose to do one of the following:
Execute the last operation with the same parameters; that means you don’t have to enter them again (IMEI, network ID, flash files, etc.) but directly re-run the command
Change the command parameters; allows you to first change the parameters of the last command and then execute it again;
Change the command, jumps to step 2 where you can select a new command;
Change the phone model; jumps to step 1 where you can select a new model.
The current step is shown on the workflow bar:
Previous steps are shown in light orange, current step in dark orange with an arrow on top and next steps are shown in black.
Info area
It is located on the lower left area of the main window. It displays information on:
NsPro card: name and identifier
Selected phone model: name, picture, cable, battery and power
If a phone model requires different cables for different operations (such as unlock and flash) the cable shown in this area is always the one you need for the current operation.
One-click Access Area
On the upper left area of the window are three buttons that offer quick access to:
Change Model: jump to the first workflow page to select a new model; this is disabled only when the a command is running;
Support Area: takes you to the NsPro support area where you can download firmware other files;
Web Search: when a model is selected it opens your default browser and searches for the current model on Google.
Upper Toolbar
The toolbar is displayed on the right upper area of the window and has the following buttons:
Settings: opens a new dialog where you can change different settings for the application.
Go to NsTeam forums: opens the NsTeam forum login page in your default browser.
Go to NsTeam page: opens NsTeam home page in your default browser.
Change language: opens a menu that allows you to change the current language.
About NsPro: opens a window that shows information about NsPro.
Help: opens a window that displays help on-the-fly related to the current workflow step.
These two buttons allow you to navigate back and forth throw the different pages specific to each workflow step. If an operation is not possible (for instance you cannot go forth with changing the IMEI until enter the IMEI) the button is disabled.
Help Window
Former NsPro assistant was replaced with a help window that is displayed right to the NsPro main window, and always moves as you move the main window. The same on-the fly help displayed in the former assistant is shown now in this window.
When the help window is not opened the toolbar button for help is red. When the help window is opened that button is blue.
You can choose to have this window opened by default when you start NsPro. You can change that from the application settings.
Settings Window
You can open this window with the Settings button from the toolbar. You can change settings for:
Logging: you can opt to log all the operations you do with all the details (phone model, command, command details, time). The log file is called NsPro.log and is located in the same folder with the application. You can view it both with Explorer (or any other similar application) and NsPro if you use the View Log button. You can delete this file at any time. This option is enabled by default.
Help: you can choose to open the help window when the application starts. This option is enabled by default.
Notifications: you can choose to be notified when an operation ends an NsPro is not on the focus (you work in another window). This option is enabled by default.
Notifications
When an operation end and NsPro is not the window you are currently working in, if notifications are enabled, an alert window is displayed on top of the taskbar. If you click on the text it brings NsPro into focus. If you click the close button it simply closes without bringing NsPro into focus.
Changing Language
NsPro 5 is the first localized version. The interface is available in English (which is the default language) and Spanish, Portuguese, and Romanian.
Any help to add more languages is welcome.
The language button on the toolbar displays a flag corresponding to the currently selected language. If you click on this button a drop down menu is displayed and you can select a different language. The moment you change a new language all interface texts are displayed in that language.
When you change the language that language becomes the default language and is used until you change it again.
When you start NsPro again the last selected language is used as default.
New version is available on official NsTeam webpage: www.nsteam.org
And on NsPro support area.
Enjoy.. -
.
NsPro v5.1.0 released:
Added : L770, A137, A237, B200, B210, C260B, E1410, E230L, E236, E746, J165L, L770V, M7500, P220, T229, T339, T459, T929 Support.
Added Get Info (read codes) support for all Qualcomm and Softbank phones.
Added E2510 flashing support.
Added new model selection form.
New version is available on official NsPro website: www.nsteam.org/download.html
On NsPro support area
And on Rapidshare: http://rapidshare.com/files/219252947/NsPro_v5.1.0.exe
NsPro v5.1.1 released:
Again, REAL solutions available ONLY on NsPro:
NsPro v5.1.1 released:
-Added S8300, S3500, C3110, E1070, E1075, E1100, E1120 full support.
Is highly recommended to use latest nspro version.
Latest nspro version is available on NsTeam website: www.nsteam.org/download.html
On NsPro support area
And on Rapidshare: http://rapidshare.com/files/222716363/NsPro_v5.1.1.exe
Edited by osirisunlock - 3/8/2009, 19:09. -
.
NsPro v5.1.2 released
-Added S7220 full support.
-Added S3500 (vodafone branded) unlocking support.
1. Flash the phone with patch file from nspro support area, using NsPro v5.1.2
2. Use UNLOCK function on NsPro.
-Added E1070, E1075, E1100, E1120 full flash/eeprom read/write.
-Improved S8300 unlocking protocol
-Fixed D780, D880, D980 master flashing bug.
Is highly recommended to update to latest nspro version.
Latest nspro version is available on official NsTeam webpage: www.nsteam.org/download.html
On NsPro support area
And on Rapidshare: http://rapidshare.com/files/224404056/NsPro_v5.1.2.exe
Edited by osirisunlock - 3/8/2009, 19:04. -
.
NsPro v5.1.3 released:
-Added E250i, J700i, C3050, B2100, E2100B, S7350, E1125 full support.
-Added support for E1075L new security versions.
-Improved new Qualcomm comunication protocol.
C3050 unlocking instructions:
1. Flash the phone with patch file from nspro support area
2. Unlock the phone using latest nspro version.
S7350 unlocking instructions:
1.If unlocking fail on "Reading Data" flsh the phone with special firmware from nspro support area
2.unlock the phone using latest nspro version
Latest NsPro version is available on official NsTeam website: www.nsteam.org/download.html
On NsPro support area
And on Rapidshare: http://rapidshare.com/files/229341843/NsPro_v5.1.3.exe
Edited by osirisunlock - 3/8/2009, 19:02. -
.
NsPro v5.1.6 released:
Added B100i, C5220, E1360B, E2210B, F265L, X576 support.
Added C3050, C3110, S3500 direct unlock (no patch needed)
Is highly recommended to update to latest nspro version.
Latest nspro version can be downloaded from nsteam website: www.nsteam.org/download.html
From Nspro support area
And from Rapidshare: http://rapidshare.com/files/237684494/NsPro_v5.1.6.exe
Edited by osirisunlock - 3/8/2009, 19:01. -
.
NsPro v5.2.0 released:
-Added A177, A257, A877, E1210S, E1310, E1310M, i627, P250, S3310, S5600, T109 support.
-Added boot flashing for A867, A877, F480, G400, L810, M7500, M8800, S5600, S7220, S7350, S8300, T919, T929.
-Added support for running on Microsoft Virtual Machine.
S5600 phones must be flashed with special firmware (boot+firmware) before unlock.
S6500 special firmware is available on nspro support area and on rapidshare:
http://rapidshare.com/files/245904645/S560..._for_Unlock.zip
Es Recomendable actualizar su programa con la ultima version de NSPro
Viejas versiones No funcionaran se eliminaran una a una!!!
Ultima version disponible en oficial nsteam website: www.nsteam.org/download.html
En NsPro Area de Soporte
Y En rapidshare: http://rapidshare.com/files/245898080/NsPro_v5.2.0.exe
Edited by osirisunlock - 3/8/2009, 19:00. -
.
NsPro v5.2.3 released:
Added A637, A766, A767, A777, A837, T239 support.
-Added support for new F480 security.
-Added support for new E1360B versions.
-Improved qualcomm unlocking procedure.
Is highly recommended to update to latest nspro version!
Latest nspro version is available on nsteam website: www.nsteam.org/download.html
On NsPro support area
And on rapidshare: http://rapidshare.com/files/248291893/NsPro_v5.2.3.exe
Edited by osirisunlock - 3/8/2009, 18:57. -
.
Added B270i, B7320,
C6620, C6625,
D900E,
E200E, E1080, E1085, E1100T, E1105T, E2120,
i200, i637, i900, i8510, i8910,
M2310, M2710, M7600,
S3110, S5050, S5200, S5230, S5230W, S5233, S5233A, S5233S, S5600V,
T119, T349 support.
Added S5600, S5600V, S7220, S7350, S8300 Code reading.
-Users that exceeded 1 year of free updates on ther NsPro box,
will have to buy the activation for the new update.
-Contact your reseller to purchase the activation.
-New users can use this update free of charge.
The new version is available on nspro support area
and on rapidshare: http://rapidshare.com/files/285075732/NsPro_v5.5.0.exe
Resellers are are welcome. -
WILUNLOCK.
User deleted
NsPro v5.5.6 released
Added A887"Solstice", T469"Gravity2", T559"Comeback", T659"Scarlet", T749"Highlight" support
Added S3650 "Corby", F480i support.
Added S523x new security support.
Added S523x IMEI Repair.
Added support for new i8910 versions.
Added S523x, S5600, S8300, M7600, etc... faster code calculation.
Improved i200, C6620, C6625 processing time
Added Card ID display when activation is required.
Edited by gokuu2008 - 1/11/2009, 01:36.