-
karurosu316
.User deleted
FORO EXCLUSIVO UPDATES CYCLONE BOX
New security DCT4plus SUPPORTED
Hello, from now we support direct unlocking (no downgrade, etc) for following new security dct4plus models:
RH-116 7070p v6.82 - new security
RM-258 2760 v6.82 - new security
RM-298 2630 v6.82 - new security
RM-340 2600c v6.82 - new security
RM-362 5000d v5.27 - new security
RM-362 5000d v5.45 - new security
RM-392 2680s v6.82 - new security
RM-394 1680c v6.82 - new security
It's solution developed by us, tested and working, phone is not dead after unlocking, it having signal etc - unless some other products on market advertieses support, phone coming dead after patching, so probably we are 1st in world here, but we don't specially like this sentence Patches avaiable here:
http://rapidshare.com/files/21357861...cDct4Pack1.rar Put it in your "UnlockData" and enjoy one click unlock.
Best regards,
Cyclone team
more to come...
Edited by osirisunlock - 25/7/2009, 16:43
. -
.
Cyclone Installer v1.01 30-03-2009
- One click downgrade repair for BB5 added. Works on phones which after downgrade failing to boot (hang up on NOKIA screen) - this includes phones which dont had patched 308 before flashing. No need to full erase, etc. Just one click and 20 seconds, fast, and safe.
- SX4 Bypass added. If phone can't be authorized due to corrupted superdongle key or server problems, you can use this to write protected PM Records (1, 309). No need to full erase, etc. Fast and safe.
- DCT4 "SIMLOCK SERVER" Relock fixed (5000, 2630)
- Check Flashing Bus for BB5 Added
- Fixed registration process, when blank arguments are used
- Fixed registration process, when invalid input data are used (i.e. special Russian chars)
- Fixed invalid date/time problem while box maintenance (upgrade) on some timezones
- Added in "Settings/General" option to skip box selftests (use when box selftest subsystem is damaged)
- Resellers list during registration is now displayed in ascending order
- Skin Stack updated to v6.21
- Added DCT4plus new security unlock patches
RH-116 7070p v6.82 - new security
RM-258 2760 v6.82 - new security
RM-298 2630 v6.82 - new security
RM-340 2600c v6.82 - new security
RM-362 5000d v5.27 - new security
RM-362 5000d v5.45 - new security
RM-392 2680s v6.82 - new security
RM-394 1680c v6.82 - new security
- USB Drivers updated to 1.0.0.3, this no more conflicting MicroBox
- Versions snap
Installer v1.01
Main x86 Application v1.0.0.6634
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.3
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.08
Onboard Main Nokia Application v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.8.0
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)
DCT4 Unlock Patches v20090326
Communication Stack SSLv3-keys-06092008
Skin Stack v6.21
Download link: http://www.cyclonebox.com/downloads/CycloneBoxInstaller.exe
Edited by osirisunlock - 25/7/2009, 16:53. -
osirisunlock .
User deleted
Cyclonebox installer v1.02
Hello, major update is ready to release. ====================== == Installer v1.02 == ====================== - RAP3Gv2 PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAP3Gv3 PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAP3Gv3 PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- RAPIDO PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAPIDO PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- SX4 Bypass added after PA_SL2 Unlock, if needed
- "Create RPL from phone" added. This is used to backup possible security data from phone in original NMP RPL format (plain one) this includes WMDRM Backup, All low-level certs (Nokia Public Certificate, Common Configuration Certificate, Hardware Certificate, VARIANT Cert), and Original SIMLOCK (only on PA_SL2 Phones !! ), which can be used to simlock restore / counter reset / PM 308 recreate - if needed - this data is sent directly to SIMLOCK SERVER directly so SL recreate is 100% "legal"
- Added Codes Counter Reset for PA_SL2 phones. Used to reset Keyboard/FBUS Code Counter.
- Added BB5 NCK Code FBUS Send (#pw+xxxxxxxxxxxxxxx+y), use especially when Keyboard counter is locked.
- Added BB5 NCK COde KEYBOARD Send (#pw+xxxxxxxxxxxxxxx+y), use especially when FBUS counter is locked.
- BB5 SL Export added. This exporting phone configuration key + simlock blocks to "SL5" file
- BB5 SL Import added. Used to import previously exported "SL5" structure to phone upon BB5 SP Initialization.
- BB5 PM -> Simlock RPL added, if PA_SL2 phone - use if simlock has been corrupted, and you have only PM backup. If PM have needed fields, it will create plain RPL file which can recreate simlock for you without headache.
- SL5 Creator support for Creating Relocked SL5 for desired MCC+MNC / Profile Bits
- Added "BB5_Autolock_IMSI.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to IMSI (one sim card).
- Added "BB5_Autolock_MCCMNC.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to MCC-MNC (operator).
- BB5 Plain RPL Write added.
- Added "UB Backup" option while writing BB5 Plain RPL (SIMLOCK AREA), since they aren't adding SHA-1 before SIMLOCK_DATA in RPL file - it needs be skipped in case.
- Added "Erase Security" option before RPL write. This is used when phone have problem with PM 308 blocks (downgrade, for example) and can't boot to accept superdongle / simlock data - in case, no need to full erase in case. Keep note that after RPL write YOU NEED SX4 Authorization with server and writing PM Fields 1 and 309. Otherwise your phone will fail to pass ST_SECURITY_TEST, and in effect will not boot.
- Skin stack updated to v6.30, this is more stable and fast
- Product code send added
- HWID send added
- PSN send added
- DCT4 Nand MASS MEMORY Partitioning added before write. May be skipped ticking apporiative Skip MM Part button.
- When no patch file found, SW will generate unlock codes for DCT4 unlock (asics 2,5,6,7)
- Security Code Mastercode is now being generated upon read info
- Added "Skip Patching" Option. Use for DCT4plus phones which are patched already, and all you need is to Initialize SP locks again (relock, etc)
- DCT4 NCK Key / FBUS Count is now being readed correctly
- DCT4 UEM OTP XXXX Read added
- DCT4 SP Locks are being parsed upon read
- Added full support for Vista OS
- Added support for 64bit CPUs - tested on X64 XP Professional, should work on NT6 too
- BB5 Simlock backup before flash write no more asking user for directory, it's automaticlly saving to StoredFiles - BB5 Simlock backup automatically saving backup in RPL format if possible (PA_SL2 phone detected), otherwise it will save it in PM format
- BB5 Booting routines totally refactorized
- After DCT4 Page erase, the last-error-status is now queried from phone
- Data checksum is now being checked again upon BB5 Flash Write
- When NPC Certificate are being backed up during SX4 Bypass, it is now stored as "PUBLIC_ID.Sx4Bypass.NPC.CMT.CRT", not "DowngradeRepair" as before
- When Writing BB5 Cert, it's now default pointing to StoredFiles - User is now being warned before "Erase all certificates" - BB5 (avoid mistakes)
- For now, Erase All Certs erasing APE certificates too, if APE unit found
- DCT4 Plus 2680 v6.82 unlock partial fixed
- 2630 v57.20 Unlock added
- 2630b v57.20 Unlock added
- 2630b v06.82 Unlock added
- 2760b v06.82 Unlock added
- 2600c-b v06.82 Unlock added
- 1680c v06.82 Unlock added
- 1680c-b v06.82 Unlock added
- 5000db v 05.27 Unlock added
- 5000db v 05.45 Unlock added
- Included old "new security" unlock partials for 2630, 1680, 5000, 2680 - v6.82
- FastMM problem after exiting Main Application fixed
- Some DCT4Plus unlock bugs fixed (like This is Invalid Integer...
- Added WD2 CBUS BT Phones support (bluetooth flashing problems)
- Check Flashing Bus (BB5) now booting phone completly, not only fetching 1st Boot Data
- Fixed problem when sometime wrong CMT / APE bootloader are being selected upon Certificate Operations
- Increased FBUS Timeout to repair FBUS transactions problems on some environments
- Netmonitor activation on DCT4/WD2 added
- WD2 Format User Area added
- "Initial SP corrupted" fixed on DCT4plus phones
- After finished flashing the sound now being played;)
- Cyclone HW Revision A112 support added
- Progressbar issue fixed while BT Flash
- SX4 Server Transaction fixed
- Bigger delay added after SX4 Bypass in order to handle PM write correctly
- More debug messages is now being shown upon BB5 booting
- Refactorized DCT4 ADSP Flashing routines
- DCT4 / BB5 Factory defaults after flashing fixed in some cases
- Minor changes and bugfixes
- Improved BB5 Local/Test mode changes
- Support : Fixed "Connection closed gracefully" in some cases
- Fixed problems when invalid XXXX are being readed out from phone (in case of phone wasn't initialized and FBUS problems occured) - PM Write routines rewritten
- Security card is now being resetted before phone flashing, this have effect on authenthication speed when flashing many phones one by one
- Selftests routines improved (dynamic timeout)
- Multiple files can be now choosen upon Writing Certificates saved as "CRT" (Cyclone binary format)
- BB5 SP Locks now being parsed upon read out (blocks count, block content, etc)
- DCT4Plus partials with version 6.82 have now removed from supported UPP list ASIC ID "3168" which is not unlockable (for now) with rom 0600 to avoid destroyed phones (no signal), in case you will got message "Not supported UPP ID", but your phone SL area will be untouched and after flash it will still work.
- Blue screen of death fixed on some configurations
- After PM Write, Statistics added, so user can easily see how many PM Record written OK / NOT OK
- XXXX in "Credits" upon calculation is now checked for validity (last digit)
- Updated Message before using DCT4 RPL Credits - ASIC 11 takes 2 credits and rest 1 credit
- Main Nokia Firmware v1.03 avaiable, this changes:
-- TX2 Output pin is now constant (Service Pin 3) due to many mistakes on user side.
-- Flash write speed optimized, should be around 10% - 30% faster, especially on NAND-ONENAND phones. More optimizations to come. -- Erase status is now signalized by USB (red) led.
-- Added support for WD2 CBUS BT Flashing
-- BB5 Booting Improved on some environments
-- RTOS Code Updated to 5.2.0
-- Microcode USB Stack is now Vista compatible
-- Removed blue screen of death problem on some XP configurations
-- Minor bugs, fixes, and improvments
- Versions snap
Installer v1.02
Main x86 Application v1.0.0.7396
x86 Memory Manager v4.92R2
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.08
Onboard Main Nokia Application v1.03
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.8.0
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)
DCT4 Unlock Patches v20090502
Communication Stack SSLv3-keys-06092008
Skin Stack v6.30
!! WHERE TO DOWNLOAD !!
Download Mirror 0 :
http://rapidshare.com/files/228313546/Cycl...oxInstaller.exe
(TRAFFIC SHARE Download - download without logging into Rapidshare Premium zone, free - no wait and limits) Download Mirror 1 :
http://www.cyclonebox.com/downloads/CycloneBoxInstaller.exe
** SOME NOTICES **
!! UPGRADE YOUR BOX FIRMWARE to version 1.03 !!
Of course we can't force you to do that, but you will loose some functionality (CBUS Flashing, UEM Reading, VISTA Support, etc). !! UPGRADE YOUR BOX DRIVERS TO VERSION 1.0.0.4 !!
Drivers should be updated automatically after installation using DPInst, but who knows. !! ABOUT INSTALLATION !!
You don't need to uninstall previous installation. Just install this version and It will automatically purge previous one (delete old drivers, loaders) and install just new one. Best regards,
more to come in next week,
cyclone box Team
New DCT4Plus phones Supported for Unlock/Relock (2009-05-09)
Added
2680 v06.31
2680b v06.31
5000d v06.17
5000d-b v06.17
Download update pack from:
http://rapidshare.com/files/231002906/NewD...yclone_5May.rar
And put in your "UnlockData".
Best Regards,
CycloneBox Team
CycloneBox Firmware v1.04 AVAIABLE !
New firmware revision was just compiled and uploaded to our server
Cyclone Nokia Application v1.04, (May 12 2009 00:28:13, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: CONST-TX2-PIN ; VISTA-SUPPORT
We have rewritten DCT4 booting routines (and finally reproduced 1680c booting problems).
That means 1680c and other phones booting problems was solved. Upgrade your boxes and DCT4 booting problems will go away. As usually each customer having 2 update credits,
so if something will go wrong during update (power failure, etc, etc, etc),
just go back and Maintenance your box again.
NOTE :
To upgrade your box, it needs be booted into bootloader mode.
Best way is to disconnect USB cable and connect it again.
Box will launch in bootloader mode, and now you can use
"Maintenance box" function from "Maintenance" module,
thus will upgrade your box.
Best Regards,
Cyclonebox Team
Cyclone Update Beta test
here is beta version, you can use it to unlock 5800, n96, e75, ini/vpl parser,etc:
http://www.cyclonebox.com/downloads/Cyclone7828NCK.rar
Official rls will come shorlty after this.
Don't forget to upgrade your box fw before use to v1.0.5
Best Regards,
CycloneBox Team. -
.
Cyclone Box Bulk Update Released
--------------------------------------------------------------------------------
New Bulk Update for Cyclone Box is ready, this includes:
1. New Cyclone Box Firmware v1.06 is avaiable on our server, upgrade it through Box Maintenance
- BB5 Booting for 5800,N97,5220 and others fixed
- Fixed problem when box has been hanging up during BB5 boot
procedure.
- Meaning of "Repower on boot" button has been inverted. That means,
BB5 phones are now by default repowered during boot (more stability
while dealing with dead / stucked / unbootable phones).
- Fixed box stability during 1208 flash and CP extract, no more
"Failed to set Flashbus baud"
- General Improved FBUS Stack stability
- Code revised
- Small speed improvment during BB5 TX2 Flashing
- Minor changes/bugfixes
2. Support for new DCT4Plus phones unlock/relock/autolock:
RM-305 1650 v5.91
RH-105 1208 v5.91
RH-105 1209 v5.91
RM-298 2630 v7.60
RM-299 2630b v7.60
RM-258 2760 v7.60
RM-258 2760b v7.60
RH-64 1600 v6.46
RH-92 1100ib v6.46
RH-93 1100i v6.46
RM-291 v06.81 (missing partial)
5. New DCT4 Loaders v7.49.00 introduced, this adds support for new flash chips.
6. Added new DCT4 UEM CBUS Loaders - ASIC11 UEM IMEI Read problems fixed.
7. New BB5 Loaders introduced, adds support for new flash chips. Note that greatly speed improvment was noticed during flash RAP3v3 phones with "slow" samsung flash chip - 00ec2208 - this includes 5200,5310,etc.
8. Old updates also included in this bulkupdater, this includes BB5 RAPIDO NCK Calculator, and DCT4Plus Unlock patches released before (after installer):
RM-392 2680 v6.17
RM-393 2680b v6.17
RM-392 2680 v5.28
RM-393 2680 v5.28
RM-362 5000d v6.31
RM-363 5000db v6.31
Download bulkupdater from : http://rapidshare.com/files/26579434...te10082009.exe
Size - 15MBytes
(trafficshare download, you don't need have rapidshare account to download updater).
Run it and click INSTALL, all patches will be applied automaticlly.
. -
gokuu2008 .
User deleted
13-08-2009 Next Bulk Update, RAPU-YAMA supported for FBUS Flash
--------------------------------------------------------------------------------
Hello,
New BULK UPDATE for Cyclone Box is avaiable, changelog:
Quote:
- Introduced support for FBUS Flashing RAPU YAMA phones (5630, 6700, 6303)
- GUI Stability improved ; updated Skins Stack
- Fixed Algoboot for BB5 phones in some configurations
- SingleLine BB5 Flashing Speed improved (upgraded to 5.5mbits from 4mbits)
- BB5 Multi-CRT Write bug fixed (mismatched certs when writing more than 1 certs at one time)
- Improved Phone LOCAL/TEST Mode Entry algorithms during unlock and FBUS operatinos
- Access Violation in some configurations, when changing BB5 Vpl / Dct4 Vpl Variant/Product - fixed
- "Set factory defaults - BB5" are now default unticked after flash (useless in case of BB5 phones)
- Repower on boot inverted ; accoring to firmware v1.0.5 , BB5 Phones are now default re-powered on boot
- By default - USE DEFAULT PROFILE while unlocking DCT4Plus is unticked
- DCT4Plus unlock routines rewritten - patch file is now applied before unlocking
- Fixed problems upon unlocking some units of DCT4(plus) phones, when Initial SP Area is corrupted
- When SIMLOCK IS NOT ACCEPTED during BB5 RPL Write, software trying to write FBUS part again after FLASHBUS part, so if NPC is corrupted, the SL will be restored anyway
- Please don't use "Erase Security" function when writing BB5 PA_SL2 RPL, because SIMLOCK will not be accepted in such case! In order of simlock rebuild, NPC MUST BE CORRECT!
- Improved BB5 RPL Write, when HWC can't be written (N96 - example), other certs being written and whole procedure is not being skipped
- After sending Simlock and Superdongle data, delay added, so PA_SL can recalculate SP and Recreate 308 if needed (previously it wasn't working all times)
- During BB5 Configuration Parse (flash chips, status), now RAM chip is displayed instead of UNKNOWN
- DCT4Plus Security Status is now being displayed upon unlock - either TAMPERED or NOT TAMPERED
- When DCT4Plus Security is NOT TAMPERED, Cyclone automatically makes Security Backup
- When user trying to unlock phone which have protected PM308 Security Block against modification, and there is message "Failed to write Security Block" software is now automaticlly writing back NPC backup - IMEI
- Erase Security while writing RPL is now by default disabled
- SX4 Bypass during PA_SL2 unlock is now by default disabled
- IMEI 1234567890?, and "?" is not valid integer bug fixed
- Cyclone Box HW Rev A113 support added
- Cyclone Box HW Rev A114 support added
- Cyclone Box HW Rev A115 support added
Example 5630 RAPU Flashed:
Quote:
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 114 products, Filtering BB5 Products - wait...
36 Products left after filtering. Ready.
Retrieving Variants for Product RM-431 - wait...
53 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm431_012.008_prd.core.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00000C34
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_ROM_ID: 3E273BF637BE26FA
rm431_012.008_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 8B5237A1F5B38048C11FB4A6B04AE1CDD3C480E2
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00020000-0x0003FFFF, ONENAND
EraseArea[0,CMT]: 0x00060000-0x004DFFFF, ONENAND
EraseArea[0,CMT]: 0x008E0000-0x0A87FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.922s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 107.469s
Restarting MCU...
Processing rm431_012.008_prd.core.fpsx (APE)...
Processing rm431_012.008_06.01_Euro3_prd.rofs2.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00000C34
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_ROM_ID: 3E273BF637BE26FA
rm431_012.008_06.01_Euro3_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 8B5237A1F5B38048C11FB4A6B04AE1CDD3C480E2
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x06480000-0x09A7FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.297s
Writing all blocks...
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 57.484s
Restarting MCU...
Processing rm431_012.008_06.01_Euro3_prd.rofs2.fpsx (APE)...
Processing rm431_012.008_C03.01_BLUE_prd.rofs3.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00000C34
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_ROM_ID: 3E273BF637BE26FA
rm431_012.008_C03.01_BLUE_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 8B5237A1F5B38048C11FB4A6B04AE1CDD3C480E2
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x09A80000-0x0A87FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.79s
Writing all blocks...
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 4.953s
Restarting MCU...
Processing rm431_012.008_C03.01_BLUE_prd.rofs3.fpsx (APE)...
Processing rm431_012.008_U000.000_prd.uda.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00000C34
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_ROM_ID: 3E273BF637BE26FA
rm431_012.008_U000.000_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 8B5237A1F5B38048C11FB4A6B04AE1CDD3C480E2
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x0A880000-0x0F63FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.421s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 13.688s
Restarting MCU...
Processing rm431_012.008_U000.000_prd.uda.fpsx (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version V ICPR82_09w24.1
MCU Date 15-06-09
Product RM-431
Manufacturer (c) Nokia
IMEI 359350021136722
Mastercode 3226214523
IMEI Spare 3A95530012317602
IMEI SV 3395530012317632F1000000
PSN CKN036964
Product Code 0564244
Basic Product Code 0559784
PSD 0000000000000000
LPSN 0
WLAN MAC 0025CFDD214E
APE SW 012.008
APE Variant 012.008012.008.06.01012.008.C03.01
APE Test rm431_2009wk10v0.010
APE HW 256
APE ADSP 256
RETU 34
TAHVO 00
AHNE 11
HW 0417
RFIC |Vapaus_5.1 | ???
DSP ICPR82_09w24_RIO
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Note on flashing RAPU units: make sure you obtained CORRECT FBUS CABLE! UFC No.2 (As we tested) NOT working with RAPU phones, because MBUS line is duplicated. We recommend to use GPG FBUS cables, as we done our tests using their cables.
This is BULK UPDATE, that means you need to download EXE file and click INSTALL. All previously released updates (few days before, rapido nck calc, etc) will be applied automaticlly, loaders will be purged too. You need have only installed installer (this one released in May, avaiable in http://www.cyclonebox.com/downloads/...xInstaller.exe)
Download new update from: http://rapidshare.com/files/26700287...te13082009.exe
Best Regards,
Cyclone Team,
Stay tuned.. -
oscarjrelno10 .
User deleted
11-09-2009 Cyclone HOT - Asic 3168 - 7100,2323,2330,2720 FREE UNLOCKING Ready!
Hi,
Bulk update 11-09-2009 for Cyclone Box is READY.
Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now:
7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20
Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it !
Unlocking is FREE.
It is FIRST standalone solution (without usage of internet).
Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07).
However, we added new service called "Super DCT4" inside a box.
To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future).
The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that with box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE.
Download link: http://rapidshare.com/files/27837846...te11092009.exe
How to check if my box is Super DCT4 Activated?
New build of sw showing this automaticlly upon launching DCT4/WD2 module, example:
Quote:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7917
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.07, (Sep 11 2009 03:35:10, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000005
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000001
Card Firmware Revision: 0108
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,97v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
External Box VPP Enabled
VPP Voltage 0,04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: FALSE
Initializing FBUS...
All initialized - Ready to work
How to activate Super DCT4 in my box?
It is very simple. Go to "Credits" module (same as you are using for calculating ASK/RPL), and click big "Activate SUPER DCT4" button. In seconds you should see similiar message:
Quote:
Started Super DCT4 Activation at 03:45:20
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: 4F67674F5428157448CEACEB547BC575
Cyclone Server (1.0.0.483), Cyclone Box Team 2008, 2009 - Ready.
Super DCT4 Activated Successfully! Credits Left: 950
Please, replug your box from USB now, and use Maintenance Function to upgrade it again.
After next upgrade, box will be activated for Super DCT4 Functions!
As message says, replug your box and re-upgrade it again. After re-upgrade your box is SUPER-DCT4-READY
Quote:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7917
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.07, (Sep 11 2009 03:35:10, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000005
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000001
Card Firmware Revision: 0108
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,98v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,96v PASSED
VBAT Voltage 4,93v PASSED
Box VPP disabled
VPP Voltage 0,02v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
And here is some unlocked phones...
Quote:
MCU Version V 06.31
MCU Date 24-03-09
Product RM-438
Manufacturer (c) Nokia
IMEI 356791022371169
Mastercode 725723337
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-438_V 06.31.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
MSID-Crypted: 841F1AFABBAFF9CCECE9143110
MSID-Plain: 2C40BAE9004D1547A8000000
FAID-Crypted: 49676CAD5E5871D32474F41B
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x01220000-0x0123FFFF]
Erasing NOR Region [0x01440000-0x0145FFFF]
Erasing NOR Region [0x014C0000-0x014DFFFF]
Erasing NOR Region [0x01C00000-0x01C1FFFF]
Erase taken 4.625s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 3.109s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature D8E30AAEFA78CD56
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553567910223711600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (C1B065BFEB7F7F6E4ADE043BDEF28AFF433AFCBE)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Quote:
MCU Version V 57.20
MCU Date 09-02-09
Product RM-298
Manufacturer (c) Nokia
IMEI 359560015082365
Mastercode 4711427143
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-298_V 57.20.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020881C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x0020881C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020881C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
MSID-Crypted: 84BF9D8E695715F78638B733B0
MSID-Plain: 2C40BAE90016370AA9000000
FAID-Crypted: A3DD17B2526DBD2FB3CDBAED
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x013E0000-0x013FFFFF]
Erasing NOR Region [0x01480000-0x0149FFFF]
Erasing NOR Region [0x016C0000-0x016DFFFF]
Erasing NOR Region [0x01C20000-0x01C3FFFF]
Erase taken 2.141s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 20.750s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature 7969BC800C852B5B
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553595600150823600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (EA251E362B1C5BEC9D9128151B64D19173B31B78)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Quote:
MCU Version V 08.20
MCU Date 30-06-09
Product RM-512
Manufacturer (c) Nokia
IMEI 356911035333218
Mastercode 76526175
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-512_V 08.20.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898981 @ 0x01000000, Intel, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x00898981 @ 0x02000000, Intel, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898981 (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
MSID-Crypted: 84049DEF3E46EBDCAFB36F38E6
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: A9E2206DCDF87F867EDCD4D9
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x01220000-0x0123FFFF]
Erasing NOR Region [0x01440000-0x0145FFFF]
Erasing NOR Region [0x014C0000-0x014DFFFF]
Erasing NOR Region [0x01CE0000-0x01CFFFFF]
Erase taken 3.359s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 36.94s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature 9D213E0BB6FC7D27
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553569110353332100
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (9D991119D205D01F82D6144491ED7788675CB5B2)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Best Regards,
Cyclone Team.. -
WILUNLOCK .
User deleted
26-10-2009 Cyclone Update Strikes Again !!!
Tropical Cyclone Strikes Again !
!!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!
Added support for new ASIC 3168 phones/versions, for now Cyclone supports following phones:
RH-86 2610 v07.04a
RH-87 2610b v07.04a
RM-258 2760 v06.82
RM-258 2760 v07.60
RM-259 2760b v06.82
RM-259 2760b v07.60
RM-298 2630 v07.60
RM-298 2630 v57.20
RM-299 2630b v07.60
RM-299 2630b v57.20
RM-340 2600c v06.82
RM-340 2600c v07.60
RM-341 2600c-b v06.82
RM-341 2600c-b v07.60
RM-391 2760h v05.45
RM-392 2680s v06.17
RM-392 2680s v56.17
RM-393 2680s-b v06.17
RM-393 2680s-b v56.17
RM-394 1680c v06.82
RM-394 1680c v07.60
RM-395 1680c-b v06.82
RM-395 1680c-b v07.60
RM-438 7100s v05.22
RM-438 7100s v05.41
RM-438 7100s v06.31
RM-438 7100s v06.32
RM-439 7100s-b v05.22
RM-439 7100s-b v05.41
RM-439 7100s-b v06.31
RM-439 7100s-b v06.32
RM-512 2330c v06.46
RM-512 2330c v06.75
RM-512 2330c v08.20
RM-513 2330c-b v06.46
RM-513 2330c-b v06.75
RM-513 2330c-b v08.20
RM-514 2320c v06.75
RM-514 2320c v08.20
RM-515 2320c-b v06.75
RM-515 2320c-b v08.20
RM-519 2720f v08.20
RM-520 2720f-b v08.20
RM-543 2323c v06.75
RM-543 2323c v08.20
RM-544 2323c-b v06.75
RM-544 2323c-b v08.20
Download updater from :http://rapidshare.com/files/298129931/CycloneBulkUpdate26102009.exe
!!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!
Br,
Cyclone Teaml,
More comming shortly !!. -
WILUNLOCK .
User deleted
New Cyclonebox Nokia firmware was uploaded to our server.
Signature: Cyclone Nokia Application v1.09, (Oct 28 2009 15:56:27, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Upgrade your box as usual using Box Maintenance functions.
To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.
Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.
Each box have now 2 SecurityArea upgrade credits, and 3 MainFirmware upgrade credits. Should be enough in case of problems. For more contact me, Cyclonebox or Honey.
Best Regards,
Cyclone Team
. -
WILUNLOCK .
User deleted
06-11-2009 New Cyclonebox Firmware Released
New Cyclonebox Nokia firmware is uploaded to our server.
Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application
Upgrade your box as usual using Box Maintenance functions.
To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.
Completly Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.
Also Added LED-progress upon Main Firmware Boot ; this will help to diagnose bootup problems in future; meanings of LED blinking upon startup below
- Code Optimizations
- RTOS Code Updated to 6.0.0
- GCC Compiler Updated to 4.3.2
- Device Framework Updated to 1.5.0
- Little Bugfixes
Firmware 01.0A LEDs Meaning upon Main Firmware startup
GREEN, BLUE, RED, ORANGE Firmware Starting - Initializing Interrupts and PLL Clocks (at this stage check 12MHZ Crystals)
GREEN, RED, ORANGE Initializing HW Modules, RTC (at this stage check RTC Clock)
RED, ORANGE Doing Security Checkup (Should not hang here)
ORANGE Initializing USB Stack (Check crystals, USB Cable Length, etc)
NO LEDS Firmware Booted. -
osirisunlock .
User deleted
*** Cyclone Box Firmware v01.0C Avaiable ***
Signature:
Cyclone Nokia Application v01.0C, (Nov 25 2009 03:18:28, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application
Changelog:
- SmartCard reset procedure rewritten from scratch, SC Reset takes now 20-30ms instead 0.5 - 1s
- Baud autonegotiation for SmartCards added using FI/DI ATR Parameters, this results faster card transactions, etc.
- Clock speed negotiation added for some cards (up to 20MHz)
- Added support for protocol autonegotiation (T=0, T=1), for some cards
- Added support for D5xxxxxx and D6xxxxxx series Cyclone Cards (TPDU problem)
- More debug messages while dealing with Smartcard added
- Minor changes and bugfixes
If your box working ok, and you aren't encountering SmartCard problem(s), update is not necessary.
Best Regards,
More coming..............
Cyclone Team
. -
caleñounlock .
User deleted
** Cyclone Shot, “SL3″ Unlock and more… **
January 2nd, 2010
Hi,
First of all, happy new year to all of our customers.
New Cyclone Installer v1.03 is ready (final installer, no bulk updates needed).
=====================
Installer v1.03
02.01.2010
=====================
- Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
- Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:
9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
38F312750F686F9FC9B1B3778774A195
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0
- Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
- After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
- To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files
- If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
- SL Area might be repaired using UNLOCK button for SL2 phones
- RPL Write bugs fixed ("simlock not accepted" after few tries)
- Path "/" problem fixed
- Memory manager updated to v4.94
- New skin manager introduced (6.53) - removed flash files selection bugs
- GUI redesigned a bit
- Nokia Connectivity Cable Driver updated to v7.1.22
- 2760h RM-391 v06.83 Unlock / Relock added
- 2330c RM-512 v09.55 Unlock / Relock added
- 2330c-b RM-513 v09.55 Unlock / Relock added
- 2720f RM-519 v08.42 Unlock / Relock added
- 2720f-b RM-519 v08.42 Unlock / Relock added
- 2720f RM-519 v09.55 Unlock / Relock added
- 2720f-b RM-519 v09.55 Unlock / Relock added
- SX4 Bypass during BB5 Unlock removed, is no needed anymore
- Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
- After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
- New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
- 6220c,3600s booting fixed in new firmware
- New Secure bootloader v02.10 introduced
- New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
- Secure BootAgent v1.00 introduced in new firmware
- Firmware RTOS Code Updated to v6.0.1
- Slightly code optimizations and stability improvments in new firmware
- Secure Bootloader upgrade introduced after box maintenance
- Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C
Here is example phones unlocked by new RPL Method,
5800 SW v31.x:
Code:
--------------------------------------------------------------------------------
BB5 Unlock Started...
MCU Version V ICPR72_09w20.8
MCU Date 09-07-09
Product RM-356
Manufacturer (c) Nokia
IMEI 353205037049770
Mastercode 323571474
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support and selecting Unlock Method...
Selected Unlock Method: RPL Calculation
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Receiving RPL from Server...
Cyclone Server (1.0.0.549), Cyclone Box Team 2008, 2009, 2010 - Ready.
Disconnected from Cyclone Server
Credits Left: 880
Saving RPL File to "RM-356_353205037049770_2010-01-02_015618.Unlock.RPL"
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version V ICPR72_09w20.8
MCU Date 09-07-09
Product RM-356
Manufacturer (c) Nokia
IMEI 353205037049770
Mastercode 323571474
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished!
--------------------------------------------------------------------------------
E51:
Code:
--------------------------------------------------------------------------------
BB5 Unlock Started...
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer (c) Nokia
IMEI 357663016552576
Mastercode 152622740
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support and selecting Unlock Method...
Selected Unlock Method: RPL Calculation
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Receiving RPL from Server...
Cyclone Server (1.0.0.552), Cyclone Box Team 2008, 2009, 2010 - Ready.
Disconnected from Cyclone Server
Credits Left: 830
Saving RPL File to "RM-244_357663016552576_2010-01-02_051510.Unlock.RPL"
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer (c) Nokia
IMEI 357663016552576
Mastercode 152622740
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished!
--------------------------------------------------------------------------------
Download Link: http://rapidshare.com/files/32908443...xInstaller.exe
! BOX FIRMWARE UPDATE IS NEEDED TO USE LATEST UPDATE !
Best Regards,
Cyclone Team
(stay tuned.... in January
)
. -
harrisonsaumeth .
User deleted
Cyclone Box News & Updates (Strictly for News & Updates only)
=====================
Installer v1.04
06.01.2010
=====================
- Included latest critical hotfix for old BB5 unlocking methods when phone after unlock was still locked, update is highly RECOMMENDED!
http://rapidshare.com/files/33098570...xInstaller.exe
other link
http://www.2shared.com/file/10495450...installer.html
zSHARE - cycloneboxinstaller.exe
http://hotfile.com/dl/23184178/37ed7...xinstaller.exe
cycloneboxinstaller.exe ... at uploaded.to - Free File Hosting, Free Image Hosting, Free Music Hosting, Free Video Hosting, ...
susmoy is offline Add to susmoy's Reputation Report Post Reply With Quote. -
caleñounlock .
User deleted
CYCLONE BOX - FREE (NO CREDITS) SL2 RPL CALC (inc 9ddb) FOR UNLOCK/RELOCK/REPAIR
--------------------------------------------------------------------------------
Hi to all
Starting from now all calculated SL2 RPLs using Cyclone Server are FREE.
One condition you need to met, you need have 101 credits on your account.
Stay tuned for some NCK-thing
Best Regards,
Cyclone Team.. -
caleñounlock .
User deleted
24-01-2010 CYCLONE SHOT SLEEPING SHOT! First STANDALONE BB5 NCK Calculator Released!
January 24th, 2010
Hi,
- Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7) for ALL BB5 RAPv3 and RAPIDO phones (including 9ddb new hash, together PA_SL1 and PA_SL2 phones)
- Unlocking Method is now being selected before unlock
- Added BB5 RPL Calc for PA_SL1 phones (using server) for Simlock Repair
- Few changes with BB5 booting, minor bugfixes, cosmetic changes, etc
!! FIRMWARE UPGRADE IS MANDATORY IN ORDER TO USE THIS UPGRADE !!
KEEP IN MIND STILL SOME PHONES (I.E. TELCELL MEXICO) CAN'T BE UNLOCKED USING NCK, THIS CASE USE FREE RPLS.
Avaiable Unlock Methods Now:
Quote:
--------------------------------------------------------------------------------
PM308 Recalculation (Standalone, Free)
NCK Calculation (Standalone, Free, New Method)
NCK Calculation (Standalone, Free, Old Method) Remark: Works only on SL2 Rapido Phones, SW < v30
RPL Calculation (Server Based, Need Credits)
--------------------------------------------------------------------------------
(need select needed unlock method before unlock)
Some phones unlocked by new method of NCK Calculation:
3600 SL2 HASH 9DDB
Code:
--------------------------------------------------------------------------------
BB5 Unlock Started...
MCU Version V 07.23
MCU Date 17-07-09
Product RM-352
Manufacturer (c) Nokia
IMEI 353661016041511
Mastercode 261533754
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1240001610F05850C9695BBBB518C05E116F9CA1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: E4BA39EE248FC5E165E280B6AD60C5C0B1A1DA6D
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1240001610F05850C9695BBBB518C05E116F9CA1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+949788008380325+1#
#pw+854251965631463+2#
#pw+914751634966481+3#
#pw+253083871743310+4#
#pw+160466531792339+5#
#pw+300636055043893+6#
#pw+831255876340647+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version V 07.23
MCU Date 17-07-09
Product RM-352
Manufacturer (c) Nokia
IMEI 353661016041511
Mastercode 261533754
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 26003F
Simlock NCK #pw+831255876340647+7#
Unlock finished!
--------------------------------------------------------------------------------
5300 SL1 HASH BAF3
Code:
--------------------------------------------------------------------------------
BB5 Unlock Started...
MCU Version V 07.20
MCU Date 23-10-08
Product RM-174
Manufacturer (c) Nokia.
IMEI 356407014798521
Mastercode 471632634
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2600600000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26006F
Simlock NCK #pw+@U˙˙˙˙˙˙˙˙˙˙+17#
Simlock NCK #pw+˙˙˙˙˙8€+255#
Simlock NCK #pw+`+38#
Simlock NCK #pw+˙˙˙ř4&o˙+255#
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+160352032409019+1#
#pw+973120735381744+2#
#pw+821765151806152+3#
#pw+691221967364775+4#
#pw+282254235199826+5#
#pw+674406233058521+6#
#pw+159388652648611+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version V 07.20
MCU Date 23-10-08
Product RM-174
Manufacturer (c) Nokia.
IMEI 356407014798521
Mastercode 471632634
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2600600000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 26006F
Simlock NCK #pw+@U˙˙˙˙˙˙˙˙˙˙+17#
Simlock NCK #pw+˙˙˙˙˙8€+255#
Simlock NCK #pw+`+38#
Simlock NCK #pw+˙˙˙ř4&o˙+255#
Unlock finished!
--------------------------------------------------------------------------------
E51 SL2 HASH CAEEBB
Code:
--------------------------------------------------------------------------------
BB5 Unlock Started...
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer (c) Nokia
IMEI 357663016552576
Simlock Server SIMLOCK SERVER
Simlock Key 2600100000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26001F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+994514387188636+1#
#pw+274615204717885+2#
#pw+842137240978606+3#
#pw+544842230747164+4#
#pw+653436892097337+5#
#pw+113577555381583+6#
#pw+360432392883102+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer (c) Nokia
IMEI 357663016552576
Simlock Server SIMLOCK SERVER
Simlock Key 2600100000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 26001F
Simlock NCK #pw+360432392883102+7#
Unlock finished!
--------------------------------------------------------------------------------
Download Link : http://rapidshare.com/files/340620565/Cyclone.exe
(REPLACE EXE at C:Program FilesCyclone Box)
Best Regards,
"Sleeping" Cyclone Team. -
WILUNLOCK .
User deleted
Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more!!!
New version of Cyclone Box Software is ready. There is a lot of changes, here is some of them:CODE- WORLD'S UNIQUE : Standalone Superdongle Key Calculator Added! No internet, no logs, no time! Calculation time - 0.003 sec ! Works for any SL1, SL2 and SL3.
- WORLD'S UNIQUE : Standalone Unlocking/Relocking using RPL Added! No internet, no logs, no time! Calculation time - 0.002 sec ! Works for any SL1 and SL2.
- WORLD'S UNIQUE : Standalone SX4 Authorization Added! Box is now emulating Nokia SX4 card - no need internet, no need logs to authorize ANY Nokia Phone, just box! Works for any SL1, SL2 or SL3. Emulated SX4 works with ORIGINAL NOKIA Superdongle keys (no need rebuild SD), Custom keys (made by Cyclone,MT,UB), etc. In case of Authorization fail, it will automaticly write and authorize using Custom Keys. Authoirzation time - 0.004 sec ! Supported are RAP and RAPIDO mcu, in case of RAPU phones SX4 Remote Card will be used. After authorization with Cyclone, PHONE STILL CAN be Authorized with ORIGINAL SX4 Card!
- WORLD'S UNIQUE - Cyclone can now authorize Barred Phones (with Correct superdongle keys, but with higher KeyIndex ever used than 0 (possible KeyIndex 0..7), SX4 card can use any higher keyindex at time, when higher key is used, lower keys are automaticly not used in future, and phone requires to use higher key index) - UB and other custom boxes can't do it as long SX4 emulation is not 100% Nokia-Like
- WORLD'S UNIQUE : Starting from now, Cyclone Box have ability to make _FULL RPL BACKUP_ of BB5 phones! Current existing SW on market creating only some part of RPL (NPC,HWC,Simlock) - Cyclone is now backing up missing part:
- Added SUPER DONGLE KEY extracting (this Original Nokia one, so after writing it back phone still can be authorized with original SX4 card)
- Added CMLA KEY DATA extracting (That means created RPL File by Cyclone is now 100% SAME AS NOKIA'S ONE! )
- WORLD'S UNIQUE : Added BB5 MCU & DSP Timestamps Reader / Diagnostic Tool. This will help diagnostic of downgraded phone, will read Security Block, decode timestamps of current installed SW (and factory one, or Dejan Hack if exists) with FLASH installed MCU/DSP timestamps. Will have ability to FULL REBUILD downgrade security zone (dead06) soon.
- WORLD'S UNIQUE : BB5 Security Block Analyzer added, this will read Security Block and analyze it's health for content of following Security Data: SIMLOCK DATA, SUPERDONGLE KEY DATA, ECC KEYS DATA, DIV DATA, CMLA (DRM) DATA. Also it reads ST_SIMLOCK_TEST and ST_SECURITY_TEST and when problems occur, recommends actions.
- WORLD'S UNIQUE : Standalone BB5 Calculator Added. This calculated BB5 NCK (levels 1-7) for unlocking purposes. Calculated codes works only with phones which have been relocked with Cyclone Box. To calculate code is needed only IMEI - no need cable, phone, flashbus logger, etc.
- WORLD'S UNIQUE : BB5 Unlock by NCk/RPL, SD Recalc, SX4 auth using USB !! (once log file readen)
- Upon box upgrade (maintenance) Bootloader in box is syncronized with server to avoid Activation Problems
- Bootagent server upgraded to 1.01, fixed "Box is not activated, ID 09)
- Fixed "Access Violation" when Cyclone Box SW is already launched and connection to box opened
- After BB5 Relock, unlock codes is displayed
- More detailed messages is now shown upon new NCK or RPL calculation
- BB5 Security Code Reading is moved to "UserArea" tab (needed space for MCU/DSP timestamp reading and security block analyzing)
- Total unlock/relock time added after operation is finished (thx to arash)
- Box Firmware version is now checked upon loading of Nokia Module - if box firmware is obsolete, SW asks for upgrade and doing it automaticly
- Selected unlock method is now displayed before RootkeyHash support check
- Upon first reading of NCK Code (Extracting) or RPL Calculation, "CYC" log file is stored in "StoredFiles" and next time upon BB5 Security Actions (Calculation of SD, Extracting NCK, Calculating RPL (Relocking)) phone is no booted anymore and whole process took only 1 second!! Keep in mind calculated CYC file is paired with Box Serial number, so in case if your box serial number is changed-go to stored files and purge all "cyc" files.
- Decrypted AES Subblock of Security Block is now checksum checked (16 bytes checksum at end of block)
- Fixed "This is invalid integer..." when parsing phone with damaged IMEI
- When another copy of Cyclone Software is running, message is displayed instead of errors
- New method of NCK Calculation is now default BB5 unlocking method
- When New Method of NCK calculation is selected, PA_SL is not determined already (saves lots of time)
- Skin Manager updated to v6.54 (more stability)
- When BB5 RPL Don't contain Certificates (NPC,HWC) phone isn't booted
- Fixed bug when Flash RPL BB5 Data is being written two times
- Added more verbose debug messages when preparing Boot BB5 Phone
- Garbage characters when dealing with SLPA phones (#pw+___garbage___+1) bug fixed
- New splash screen added, thx to arash, again
- When Cyclone fails to boot APE subsystem, it shows hint about TX2
- APE subsystem is now no longer booted upon CheckFlashingBus
- Changed "Failed to write CMT Cert Data (3)" message, added TX2 information
- BB5 TX2 Line test added after "CheckFlashingBus"
- Before RPL Write, Software testing TX2 Line and when its faulty (not adapter) it showing apporiate message
- Writing BB5 CMT HWC Certificate from RPL fixed (thx to arash)
- Parsing some Simlock Arrays (5130) produced garbage output - fixed (thx to arash again)
- Added support for Cyclone Box HW Rev A11D
Just download EXE file and replace at C:Program filesCyclone Box
Make sure Installer is installed aswell (this one from january, else you will have message RootkeyHash not supported).
You don't need any activations,logs to use this update.
Notes:
SX4 Emulation works offline and emulates SX4 card 1:1, in case of failure still server will be used.
BB5 NCK Calculator works for phone relocked by Cyclone Only (unlocking using IMEI only, no need know other data, just imei - no need cable or connection to box too).
BB5 USB Unlocking and other security tools works only if phone log (by flashbus) is readen before.
Update is fast and most of security functions (sd,rpl) works very fast.
Don't forget to upgrade your Box Firmware to v01.21.
Download Link : http://rapidshare.com/files/349693053/Cyclone.exe.
FORO EXCLUSIVO UPDATES CYCLONE BOX |
