-
Gokuu2008
.User deleted
CODEATF 6.10 Update!! 8 SEC Flashing!! 07 DEC 10 !! Public Discussion Thread:
ATF 6.10 Update!! 8 SEC Flashing!! 07 DEC 10!!
Common Changes:
Application GUI is now locked to 800x600 resolution (slightly bigger than before)
Added New Products to Nokia.ini
Update File Path was changed (will be enabled in Server side)
DCT4 Change Logs:
New DCT4 Booting v2 with better compatibility with Desktop PCs and ICH7
DCT4 Write RPL Speed was adjusted for better compatibility with very Slow UPPs
Fixed Server Bug on DCT4 RPL Credits Counter
BB5 USB Change Logs:
Original SX4 Card Authorization via Server is now Enabled in USB Mode
Life Timer Tuning is now enabled in USB Mode (Supports Broadcom and Rapuyama Fields as well)
Customized PM Programming is now Enabled in USB Mode
Extended Self-Tests and Test-Scan is now Enabled in USB Mode
PM Full Writing on non write protected fields are now enabled in USB Mode
Read Memory Card Password is now added for USB Mode
Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for USB Mode
Manual Send Unlock Codes is now enabled in USB Mode
Automatic Life Timer Reset to 0000:00 when Factory Reset is selected during USB Flashing
Write New Product Code is now enabled in USB Mode
Super Dongle Validity Check is now enabled in USB Mode
BB5 FBUS Change Logs:
Life Timer Tuning is now Supports Broadcom and Rapuyama Fields
Read Memory Card Password is now added for FBUS Mode
Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for FBUS Mode
Automatic Life Timer Reset to 0000:00 when Factory Reset is selected during FBUS Flashing
Just some more notes...
If MMC Password is available, it will be saved during Simlock Backup as well.
FBUS Loaders are still the same as the 6.00 release which is 10.42.000.7
USB flashing for Broadcom Phones just takes 8~9 seconds (tested on X2-00, C3-00, 2710c and 7020)
Life Timer Tuning AUTODETECTS the correct Fields for every BB5 Phone Released upto Today (First in the World)
Always add --> C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your Virus Scanner EXCLUSION LIST
Always add --> C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your Windows Firewall Trusted Applications List
This Software Release still uses LogiCore 8.15.10, so there is NO NEED to Update the Firmware if you already have this firmware version.
2710c USB Flash with LifeTimer Reset 8 Sec!!
Code:
Number of Image Files: 3
Processing Image File :
rm586__06.13.mcusw
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 463
Entry Point: 0x01E2
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm586__06.13.ppm_s
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 115
Entry Point: 0x00FA
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm586__06.13.image_s_ma_black
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 241
Entry Point: 0x0134
Page Format : -1
MAX PAGE : 0x0000E000
[]: Found 1 active devices.
[Nokia 2710 Navigation Edition USB Phonet]: Opening Connection
[Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
SW: V 06.13 09-04-10 RM-586 (c) Nokia
IMEI: 358294031250993
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked
START FULL PM BACKUP
Please Wait...
Reading : PM 0~400... OK!
FULL PM Backup Saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\358294031250993\USB_FULL_BACKUP_V 06.13 09-04-10 RM-586 (c) Nokia_358294031250993_Not Locked_124901.pm
Reading battery value : 4119 mV
AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 6 (0x06)
1 SYSTEM_ASIC_ID 01
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000000
ID DWORD 1 : 00000000
ID DWORD 2 : 22000509
ID DWORD 3 : 200C0000
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00005361
3 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : AB079603
ID DWORD 1 : 03FB3C85
ID DWORD 2 : AB035491
ID DWORD 3 : 40ACB2E7
ID DWORD 4 : 873C89B5
4 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
5 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 1B 0D 74 C5 32 CA 1C 61 33 94 0C 74 0E 8C 78 6E
6 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : DE56D582
CRC 1 : BDDE7A3A
START FLASHING
RawLoaderExtract: Processing rm586__06.13.mcusw
Match LOADER : C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_usb2nd.fg
Loader Uploaded.....
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : C1
SubBlocks : 06
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : RAM 05
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 01
Manufacturer Code : 0000 -> SPANSION
Device ID : 0001 -> not used
Extended/Fixed ID : 0000
Revision ID : 0000
5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MuxOneNAND 03
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 0030 -> K5W1G13ACB
Extended/Fixed ID : 0000
Revision ID : 0321
6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
Block Length : 09
BB ASIC Index : CMT 00
Data :
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Flash Descriptor
Manufacturer Code : 00EC
Device ID : 0030
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 08000000 (128 MB)
VPP Info : 0000
Erase10s : 1E
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
ROOTHASH : 1B0D74C532CA1C6133940C740E8C786E
Match File.....C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_XSR16_usbalg.fg
Done!
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok
START READING RPL DATA
IMEI: 358294031250993
Reading : NPC... OK!
Reading : CCC... OK!
Reading : HWC... OK!
Reading : R&D... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\358294031250993\358294031250993_124912.rpl
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
PAPUB Keys Hash : 84CDC75F79F52BBAE46EA3A70C9240861412C480
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.mcusw
Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
Certificate 1
Name : NPC
ASIC Index : CMT 0
Certificate 2
Name : CCC
ASIC Index : CMT 0
Certificate 3
Name : HWC
ASIC Index : CMT 0
Certificate 4
Name : RND
ASIC Index : CMT 0
Certificate 5
Name : R&D
ASIC Index : CMT 0
STORE_CERTIFICATE_REQUEST_BB5 : 61 05 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 4E 44 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 B6
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5...
Partition Info
Partition Blocks : 1
1 PARTITION_INFO_BB5
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Partition Version : 00010000
Spare : FFFFFFFF
Num Partitions : 00000004
Partition 1
ID : 00000003 COPIEDOS
Attribute : 00000002 RO
Start Address : 00020000
Size : 02660000
Partition 2
ID : 00000008 FILESYSTEM
Attribute : 00000001 RW
Start Address : 02800000
Size : 04D40000
Partition 3
ID : 0000000A PMM
Attribute : 00000001 RW
Start Address : 07540000
Size : 00600000
Partition 4
ID : 0000000B
Attribute : 00000001 RW
Start Address : 07B40000
Size : 00180000
PARTITION_INFO_REQUEST_BB5 : 64012F4F00030000010000FFFFFFFF000000040000000300000002000200000266000000000008000000010280000004D400000000000A0000000107540000006000000000000B0000000107B400000018000005
PARTITION_INFO_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5 : No Error - 0 (0x00)
StartErase_DCT5...
BlockLength : 0x80 (128)
ERASE Blocks : 0x03 (3)
0 ERASE_AREA_BB5 0x12
Block Length : 0x1B (27)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 00000000-0001FFFF
1 : 00020000-000203FF
2 : 00060000-01FFFFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000A0000000100000002000000640000000200000002000000010000000000000000
2 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000B0000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5003120B000300000000000001FFFF120B00030000020000000203FF120B0003000006000001FFFFFF93
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000A00000001000000020000006400000002000000020000000100000000000000003B
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000B00000000000000020000006400000002000000020000000100000000000000003B
Successfully erased..
Total blocks to write : 463
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : UPDAPP
>> CMT Rootkey Hash CERT : MCUSW
>> CMT Rootkey Hash CERT : GENIO_INIT
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.ppm_s
StartErase_DCT5...
BlockLength : 0x0E (14)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 02000000-0267FFFF
ERASE_REQUEST_BB5 : 5001120B000300020000000267FFFF75
Successfully erased..
Total blocks to write : 115
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.image_s_ma_black
StartErase_DCT5...
BlockLength : 0x3F (63)
ERASE Blocks : 0x02 (2)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 02800000-0753FFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 00000000000000080000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5001120B000300028000000753FFFF04
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000800000000000000020000006400000002000000020000000100000000000000003E
Successfully erased..
Total blocks to write : 241
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 15 STATUS_NAND_OK_BB5
Block Length : 0F
BB ASIC Index : 00
Device Type : 03
Device Type : 00
Num Bad Blocks : 00000001
Additional Bad : 00000001
Correctable ECC : 00000000
FlashInfo.RestartMode : 2
Flashing Done...
Total Flashing Time (Erase + Flashing) : 00:00:08
(Booting time is NOT Included)
Waiting for Phone to Start-Up..(Max 100 seconds)
If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time: 5 Seconds...
Elapsed Time: 10 Seconds...
Elapsed Time: 15 Seconds...
SW: V 06.13 09-04-10 RM-586 (c) Nokia
IMEI: 358294031250993
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SUPER_DONGLE_TEST : PASSED
SECURITY_CODE : 12345
================================================
SL3 Phone detected
================================================
* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...
FACTORY SET TO : Factory Set Full
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Production Tune
OK
FACTORY SET TO : Production Tuning
OK
FACTORY SET TO : Reset User Code
OK
FACTORY SET TO : Service Centre
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : User Data
OK
RESET LIFE TIMER TO : 0000:00
OK
X2-00 USB Flash with LifeTimer Reset 8 Sec!!
Code:
Number of Image Files: 3
Processing Image File :
rm618__04.80.mcusw
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 506
Entry Point: 0x01E5
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm618__04.80.ppm_a
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 109
Entry Point: 0x0100
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm618__04.80.image_a_0595127_004
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 317
Entry Point: 0x0134
Page Format : -1
MAX PAGE : 0x0000E000
[]: Found 1 active devices.
[Nokia X2-00 USB Phonet]: Opening Connection
[Nokia X2-00 USB Phonet]: Port opened OK!
SW: V 04.80 03-08-10 RM-618 (c) Nokia
IMEI: 353423040652148
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked
START FULL PM BACKUP
Please Wait...
Reading : PM 0~400... OK!
FULL PM Backup Saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\353423040652148\USB_FULL_BACKUP_V 04.80 03-08-10 RM-618 (c) Nokia_353423040652148_Not Locked_125647.pm
Reading battery value : 4097 mV
AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 6 (0x06)
1 SYSTEM_ASIC_ID 01
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000000
ID DWORD 1 : 00000000
ID DWORD 2 : 22000509
ID DWORD 3 : 200C0000
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00005361
3 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : B1096A83
ID DWORD 1 : 135F4216
ID DWORD 2 : 1575A668
ID DWORD 3 : 5044D453
ID DWORD 4 : E87FCD90
4 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
5 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 1B 0D 74 C5 32 CA 1C 61 33 94 0C 74 0E 8C 78 6E
6 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : DE56D582
CRC 1 : BDDE7A3A
START FLASHING
RawLoaderExtract: Processing rm618__04.80.mcusw
Match LOADER : C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_usb2nd.fg
Loader Uploaded.....
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : C1
SubBlocks : 06
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : RAM 05
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 0020 ->
Device ID : 0030 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0131
4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 01
Manufacturer Code : 0000 -> SPANSION
Device ID : 0001 -> not used
Extended/Fixed ID : 0000
Revision ID : 0000
5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MuxOneNAND 03
Device Index : 00
Manufacturer Code : 0020 ->
Device ID : 0030 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0131
6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
Block Length : 09
BB ASIC Index : CMT 00
Data :
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Flash Descriptor
Manufacturer Code : 0020
Device ID : 0030
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 08000000 (128 MB)
VPP Info : 0000
Erase10s : 1E
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
ROOTHASH : 1B0D74C532CA1C6133940C740E8C786E
Match File.....C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_XSR16_usbalg.fg
Done!
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok
START READING RPL DATA
IMEI: 353423040652148
Reading : NPC... OK!
Reading : CCC... OK!
Reading : HWC... OK!
Reading : R&D... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\353423040652148\353423040652148_125658.rpl
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
PAPUB Keys Hash : E9700989029D9E899915F781B1582048E042A738
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.mcusw
Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
Certificate 1
Name : NPC
ASIC Index : CMT 0
Certificate 2
Name : CCC
ASIC Index : CMT 0
Certificate 3
Name : HWC
ASIC Index : CMT 0
Certificate 4
Name : R&D
ASIC Index : CMT 0
STORE_CERTIFICATE_REQUEST_BB5 : 61 04 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 D3
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5...
Partition Info
Partition Blocks : 1
1 PARTITION_INFO_BB5
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Partition Version : 00010000
Spare : FFFFFFFF
Num Partitions : 00000004
Partition 1
ID : 00000003 COPIEDOS
Attribute : 00000002 RO
Start Address : 00020000
Size : 024E0000
Partition 2
ID : 00000008 FILESYSTEM
Attribute : 00000001 RW
Start Address : 02900000
Size : 04C40000
Partition 3
ID : 0000000A PMM
Attribute : 00000001 RW
Start Address : 07540000
Size : 00600000
Partition 4
ID : 0000000B
Attribute : 00000001 RW
Start Address : 07B40000
Size : 00180000
PARTITION_INFO_REQUEST_BB5 : 64012F4F00030000010000FFFFFFFF00000004000000030000000200020000024E000000000008000000010290000004C400000000000A0000000107540000006000000000000B0000000107B40000001800001D
PARTITION_INFO_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5 : No Error - 0 (0x00)
StartErase_DCT5...
BlockLength : 0x90 (144)
ERASE Blocks : 0x03 (3)
0 ERASE_AREA_BB5 0x12
Block Length : 0x2B (43)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 00000000-0001FFFF
1 : 00020000-000203FF
2 : 00060000-011BFFFF
3 : 011C0000-01CFFFFF
4 : 02500000-028FFFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000A0000000100000002000000640000000200000002000000010000000000000000
2 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000B0000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5005120B000300000000000001FFFF120B00030000020000000203FF120B00030000060000011BFFFF120B000300011C000001CFFFFF120B00030002500000028FFFFF69
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000A00000001000000020000006400000002000000020000000100000000000000003B
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000B00000000000000020000006400000002000000020000000100000000000000003B
Successfully erased..
Total blocks to write : 506
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : ISA+DYNSW
>> CMT Rootkey Hash CERT : MCUSW
>> CMT Rootkey Hash CERT : MCUSW1
>> CMT Rootkey Hash CERT : GENIO_INIT
>> CMT Rootkey Hash CERT : UPDAPP
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.ppm_a
StartErase_DCT5...
BlockLength : 0x0E (14)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 01D00000-024FFFFF
ERASE_REQUEST_BB5 : 5001120B00030001D00000024FFFFFBE
Successfully erased..
Total blocks to write : 109
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.image_a_0595127_004
StartErase_DCT5...
BlockLength : 0x3F (63)
ERASE Blocks : 0x02 (2)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 02900000-0753FFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 00000000000000080000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5001120B000300029000000753FFFFF4
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000800000000000000020000006400000002000000020000000100000000000000003E
Successfully erased..
Total blocks to write : 317
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 15 STATUS_NAND_OK_BB5
Block Length : 0F
BB ASIC Index : 00
Device Type : 03
Device Type : 00
Num Bad Blocks : 00000001
Additional Bad : 00000001
Correctable ECC : 00000000
FlashInfo.RestartMode : 2
Flashing Done...
Total Flashing Time (Erase + Flashing) : 00:00:08
(Booting time is NOT Included)
Waiting for Phone to Start-Up..(Max 100 seconds)
If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time: 5 Seconds...
Elapsed Time: 10 Seconds...
SW: V 04.80 03-08-10 RM-618 (c) Nokia
IMEI: 353423040652148
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SUPER_DONGLE_TEST : PASSED
SECURITY_CODE : 12345
================================================
SL3 Phone detected
================================================
* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...
FACTORY SET TO : Factory Set Full
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Production Tune
OK
FACTORY SET TO : Production Tuning
OK
FACTORY SET TO : Reset User Code
OK
FACTORY SET TO : Service Centre
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : User Data
OK
RESET LIFE TIMER TO : 0000:00
OK
__________________________________________________ ________________________
Buy only from ATF [Advance Turbo Flasher] authorized resellers:
ATF [Advance Turbo Flasher] Authorized Distributors and Resellers List
ATF [Advance Turbo Flasher] official web sites:
International - [URL=http://www.advance-box.com/]www.advance-box.com/[/URL]
ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
The Master Piece
Edited by Gokuu2008 - 7/3/2011, 21:32
. -
Gokuu2008 .
User deleted
ATF 6.30 Christmas Update!! 24 DEC 10!! Merry Christmas!!
ATF 6.30 Christmas Update!! 24 DEC 10!! Merry Christmas!!
Common Changes:
Added New Products to Nokia.ini
DCT4 Change Logs:
New DCT4 Booting Procedure now compatible with any USB Hardware Chips (ICH7 etc)
Adjusted Secondary Loader Sending Speed during Buschecking and UEM Writing
Write RPL Timeout Delay was increased
Common Software Change Logs:
"Regular PCB" and "Modified PCB" can now be selected before clicking "Restore Box"
This is useful for end users who has accidentally writen the wrong firmware to their box
Flash File Server Change Logs:
New Authentication Scheme for easier user access
Download Activity Logging (IP Address, Box ID)
Who will buy this if you can get more in ATF?
. -
diderotd24 .
User deleted
The Long Wait is finally over...
ATF Team Launches the New ATF Network with Cutting Edge Services
that will help you become a step ahead of your competition.
[Super Dongle Repair for ALL SL3 Phones]
ATF Team is Proud to present to you SL3 Super Dongle Repair for
ALL BB5 Phones in the Market via the "Phone Authorization" Service
offered by The ATF Network (FBUS Cable Required).
This Unique service allows you to Fix Super Dongle problems on ALL
BB5 Phones and it will even allow you FULLY DOWNGRADE any BB5 Phone to any compatible Firmware Version you want.
All you need is to activate your ATF Network account and start using
ATF Credits so you can finally Repair all the NEW Phones in the Market!!!
[SX-4 Stand Alone for ALL SL3 Phones]
Through the "Phone Authorization" Service of The ATF Network, you can also enjoy stand Alone SX-4 Authorization for ALL SL3 Phones in the market.
What is Phone Authorization?
Phone Authorization is a Service Offered by The ATF Network that will
allow you to utilize more Repair Options for ALL SL3 Phones in the Market.
Once a Phone is "Authorized", Super Dongle Repairs and SX-4 Authorizationcan be performed via Stand Alone Mode.
Which Phones are supported?
All BB5 Phones are supported, but currently it only supports FBUS Connection.
USB Connection "may" be supported in the future, but we still do not have a definite date for this to happen.
Is the "Phone Authorization" Service Free?
No, it is not free. You need to purchase ATF Credits from your nearest
ATF Reseller.
You will first need to Create an ATF Network Account, then you can start using our Phone Authorization service for merely 5 Credits Per Phone. (5 credits is about 5 USD).
So ALL phones needs to be Authorized now?
No, you ONLY NEED to Authorize the New BB5 Phones which have New HASHES that are NOT Supported by any other Team in the world. If your phone is using OLD HASH, then you can still work with it without paying for Authorization.
Why do I need to pay for this service? I want free!!!
If you promise to Repair all your Customer's Phones for FREE, then we
will give you a free Activation for the ATF Network and some FREE Credits so you can Authorize Phones for free. But do not forget, you also need to repair ALL PHONES in your shop for FREE! Do you agree? Email us if you agree to repair phones for Free.
How Many times do I need to Authorize the Phone?
You only need to Authorize the phone 1 time. Once it is authorized, you
no longer need to perform authorization again.
Can you repair Simlocks and IMEI from 100% erased SL3 and SIMLOC30 phones?
No. We cannot repair or rebuild Simlocks for SL3 and SIMLOC30 phones. You can only repair these phones if you have a PM 120 Backup and an RPL Backup.
Can I SD Repair and Authorize new SIMLOC30 phones?
YES, YES, YES... The ATF Network Supports ALL BB5 Phones in the Market.
You just need to use FBUS Connection if you want to Authorize Phones.
Which NEW HASHES are currently Supported by The ATF Network?
The ATF Network currently supported ALL 22 New HASHES released
as of March 1, 2011.
479C6DDE3942E12C429C1D6ADED803710E52EBD3
C70CB07324056BC66A824347F40DB2D5E198D1B2
916F75217F32081248B15C38DFC8E81B1803F26F
25B977A055BE9B5DEC0C38A2A279C6958594B998
7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
928E5FFB88D81E5F74729A212AB9D12EC755ED14
2C05369F57CC3C4CF9E783E83D9B512B53E28D99
3AB5DB70B45D23F1ADEEBB5734160706668138E1
2B910DA4E0FBEFFFE5C65D3682854636C02881F7
68597B9162BAB81AF74C56E78EA2588F2D968376
EA81B32860B86EF4231A11831045F3E6AE071379
8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
46802B476C93A05CBAF76A64752086A9A7320E5C
1B0D74C532CA1C6133940C740E8C786E49B99671
700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
87FAC992288DA497A663E5DDC0410B11521B8D0C
55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
49A97E826B93BA20B7ED0B082475C0056EBB8F8D
FEA0F9E21EF50B836924A9F25D85C643D8514505
OLD HASHES are also supported, but you DO NOT NEED The ATF Network for OLD HASHES!!!
How much do I need to pay to Activate my ATF Network Account?
You need 99 Credits = 99 USD to Activate your ATF Network Account.
Then you will only need to spend 5 Credits (5 USD) for EACH Phone you want to Authorize.
Do I need Internet Connection to connect to the ATF Network?
Of course dear :O) But the good news is, after you have successfully
Authorized your phone, you do not need the internet connection anymore
to perform SD Repairs and SX4 Authorization. It will be Stand Alone.
How long do I need to wait before my phone is Authorized?
Average time is 10 to 20 seconds, depending on your Internet Connection.
Ok last question, do you support the E7-00 which is the NEWEST BB5 Phone in the Market?
Yes, E7-00 HASH is supported by The ATF Network... However, you first need to find an FBUS Cable for E7-00 beause The ATF Network DOES NOT SUPPORT USB Connection as of the moment.
USB Connection will be supported in the future, but we cannot give you an actual date on when it will be released.
__________________________________________________ ________________________
SL3 SD Repair!! ATF Network!! ATF v7.00 Update!! Public Discussion thread:
SL3 SD Repair!! ATF Network!! ATF v7.00 Update!! Public Discussion thread:
ATF [Advance Turbo Flasher] official web sites:
International - www.advance-box.com/
ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com. -
Gokuu2008 .
User deleted
SL3 Local Brute Force for ALL BB5 HASHES!! ATF 7.10 Update!! 07 MAR 11!!
SL3 Local Brute Force for ALL BB5 HASHES vis FBUS Cable
*** SL1/SL2 Stand Alone Unlock and Rebuild Simlocks via Simlock RPL ***
Requirements For Service:
You need to have an ACTIVATED account in The ATF Network if your phone is NEW HASH.
Authorization Cost for EACH NEW HASH Phone is still just 5 Credits
After phone is AUTHORIZED, you can do the following tasks in Stand Alone Mode:
1. Super Dongle Repair
2. SX-4 Stand Alone Authorization
3. Decrypt SL3 PM 120 HASHES
Supported BB5 New HASHES via FBUS (Cost 5 Credits):
479C6DDE3942E12C429C1D6ADED803710E52EBD3
C70CB07324056BC66A824347F40DB2D5E198D1B2
916F75217F32081248B15C38DFC8E81B1803F26F
25B977A055BE9B5DEC0C38A2A279C6958594B998
7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
928E5FFB88D81E5F74729A212AB9D12EC755ED14
2C05369F57CC3C4CF9E783E83D9B512B53E28D99
3AB5DB70B45D23F1ADEEBB5734160706668138E1
2B910DA4E0FBEFFFE5C65D3682854636C02881F7
68597B9162BAB81AF74C56E78EA2588F2D968376
EA81B32860B86EF4231A11831045F3E6AE071379
8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
46802B476C93A05CBAF76A64752086A9A7320E5C
1B0D74C532CA1C6133940C740E8C786E49B99671
700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
87FAC992288DA497A663E5DDC0410B11521B8D0C
55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
49A97E826B93BA20B7ED0B082475C0056EBB8F8D
FEA0F9E21EF50B836924A9F25D85C643D8514505
Supported BB5 OLD HASHES via FBUS (100% FREE and DOES NOT NEED ATF NETWORK ACCOUNT)
38F312750F686F9FC9B1B3778774A195
9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
A5404AE83A594ECADEE532F0C236BFA6
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
E9EFF4BFAA5393217CA6B17755FC3E14
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0
__________________________________________________ ________________________
Download From:
Use Auto Update function To download it.
SL3 Local Brute Force for ALL BB5 HASHES!! ATF 7.10 Update!! Public Discussion thread:
SL3 Local Brute Force for ALL BB5 HASHES!! ATF 7.10 Update!! Public Discussion Thread
ATF [Advance Turbo Flasher] official web sites:
International - www.advance-box.com/
ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com
The Master Piece. -
roniscell .
User deleted
Advance Turbo Flasher v7.40
Release Date: April 04, 2011
DCT4 Updates:
Stand Alone RPL Calculation via "REPAIR IMEI" button for ALL DCT4 Phones ASICs (2, 5, 6, 7 and 11)
Master Code Calculator Version 2.0 can now Correctly Calculate the 10-digit Master Code for ALL DCT4 PHONES
BB5 Updates:
Stand Alone BB5 SL3 15-digit NCK Calculator for ighashgpu Brute Force Result
PA_SIMLOC30 NCK Code Sending now supported for New 20-digit Code
RAPUYAMA and RAP3Gv40 Booting Fixed
Common Changes:
Fixed Full Factory Settings Command
Fixed Product Search and Phone Search Menu
Self-Test Actual Status is now Displayed
Notes:
*** It is advised that you should use iMetal_Dark.skn
1. YOU MUST Add "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus Scanner Excemption/Exclusion List of Trusted Applications
2. YOU MUST Add "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows Firewall Excemption/Exclusion List of Trusted Applications
3. DO NOT disable the Microsoft Windows Firewall!!!
4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and get information on how to add AdvanceBox.exe to the Excemption/Exclusion List
5. Make sure you have done Steps 1-2-3-4
. -
ncoolsoft .
User deleted
Free Fastest SL3 LBF with ATI 6xxx Support --> oclHashcat-lite v0.02 by atom
Thanks to atom for providing us with 100% Free and 100% fast SL3 LBF Software.
Also 100% support for new ATI 6xxx cards (6790, 6990 etc)...
official download area:
oclHashcat-lite - advanced password recovery
GPU Driver and SDK Requirements:
NV users require ForceWare v260.x+
AMD users require Catalyst v11.3+ with APP SDK2.4+ or integrated OpenCL driver
Features
Worlds fastest MD4, MD5, SHA1 and SHA256 cracker
Free
Multi-GPU (up to 16 gpus)
Multi-OS (Linux & Windows native binaries)
Multi-Platform (OpenCL & CUDA support)
Multi-Algo (see below)
Low resource utilization, you can still watch movies or play games while cracking
Supports password masks
Supports distributed cracking
Supports pause / resume while cracking
Supports sessions
Supports restore
Supports hex-salt
Supports hex-charset
Integrated thermal watchdog
... and much more
Algorithms
MD5
md5($pass.$salt)
md5(md5($pass))
vBulletin < v3.8.5
SHA1
sha1($pass.$salt)
MySQL > v4.1
MD4
NTLM
Domain Cached Credentials
SHA256
Tested OS's
All Windows and Linux versions should work on both 32 and 64 bit
Tested GPU's
All CUDA and Stream enabled cards should work
==================================================
==================================================
For more information about how to setup Windows or Ubuntu with
oclHashcat-lite, you can visit atom's official forum or you can also
post your inquiries in ATF Section on this thread:
Fastest LBF Free Download!! OlcHashcat-lite v0.2!! HD6xxx Supported!
You can now build yourself the fastest LBF "Monster PC" by using:
Motherboard: MSI Big Bang Marshal
Video Card: 8 pieces ATI 6970
This will give you 14,170 Million HASH/s on STOCK CLOCKS...
Overclock with give you more than 15,xxx HASH/s and the video cards
will still be less than 80 degrees celcius with the stock cooling system.
B.R.. -
roniscell .
User deleted
ATF Update v7.49 - REAL ALL HASHES Support for 1 Time Activation Only!!!
For a 1 time Activation of 49 Credits, Joining The ATF Network
will allow you to perform UNLIMITED TASKS to ANY BB5 FBUS HASH
for all BB5 Phones with FBUS Connection in Planet Earth...
Update and Activate to ATF v7.49 Now and Enjoy the following supported TASKS:
Unlimited SL3 PM 120 HASH Decryption for ALL NEW HASH BB5 Phones with FBUS Connection
Unlimited SL2 Direct Unlock for 6120c, 6760s and 6790s NEW HASH 479Cxxxx Phones
Unlimited Super Dongle Repair for ALL NEW HASH BB5 Phones with FBUS Connection
Unlimited SX-4 Authorization (Customized Keys) for ALL BB5 Phones with FBUS Connection
Unlimited SL3 Downgrade for phones with ENO files available
Activate Now and get a chance to Participate and WIN FREE RAPIDO NEW HASH Unlocking!!!
Special SL3 LBF Tools for Hashcat v0.05 by atom on v7.49
Supports Manual IMEI and HASH input or input via LOG files (*.log, *.bcl and *.sha)
Resume or Skip Brute Force Jobs at any Percentage % you want
Divide Brute Force Jobs to 2, 3, 4, 5 or 10 Super Computers (Distributed Cracking)
Specify Temperature Limit (85, 90, 95, 100 or NO LIMIT)
Improve your BF time by guessing ODD or EVEN for last digit in the Master Code!
General Updates Added on v7.49
Infineon X1-00 RM-732, X1-00.1 RM-733 Flashing Support Added
Fixed FTDI Read Timeout Bug on BB5 OLD LOADER + OLD PROTOCOL Flashing
Self Test Status Report Updated
Additional Information:
For End users who paid 99 Credits for ATF Network Activation since March 2011,
you will all get a 50 Credits Rebate which will be delivered back into your
account within 24 hours.
__________________________________________________ ________________________
Download From:
Click the auto update button in exe.
Buy only from ATF [Advance Turbo Flasher] authorized resellers:
ATF [Advance Turbo Flasher] Authorized Distributors and Resellers List. -
roniscell .
User deleted
ATF 7.50 RAPUYAMA + RAP3Gv4 ALL HASHES via USB Cable ONLY !!!
. -
ncoolsoft .
User deleted
ATF MASS Memory Flashing 7.60 Update!! 21 JUNE 2011!!
Major Flashing Updates
Flashing Updates:
BB5 Mass Memory Flashing Enabled for FBUS New Protocol (Fastest In The World)
BB5 Mass Memory Flashing Enabled for FBUS Old Protocol (Fastest In The World)
BB5 Mass Memory Flashing Enabled for USB New Protocol (Fastest In The World)
BB5 Mass Memory Flashing Enabled for USB New Protocol (Rapido) (Fastest In The World)
Infineon USB XG2130 Flashing Updated to support C2-00
Infineon FBUS XG110 Flashing Updated to Support X1-00, X1-01
Infineon FBUS XG101 Flashing Updated to Support New Loaders
FBUS New Protocol Flashing Rewritten (Speed Increase)
FBUS Old Protocol Flashing Rewritten (Speed Increase)
Full Certificates Backup for New Phones with 'PARTNERC' Certificates (E6-00) (First In The World)
Full Certificates Write for New Phones with 'PARTNERC' Certificates (E6-00) (First In The World)
USB NON-ADL Flashing for Rapido Phones (Can Flash Totally Dead Phones)
General Updates:
New Nokia FBUS and USB Flash Loaders (11.16.000.2)
New Nokia Infineon Static 'Buscheck' Loaders
New Nokia Connectivity Cable Driver (7.1.40.0)
New ATF Drivers Introduced (2.18.14)
Minor Bug Fixes
USB ADL Flashing Now 80% Faster Than Previous Versions (5130 full Flash = 6:xx minutes)
6500c CNT Flashing Problem Fixed
Big Flash Files 1GB upto 16GB is now supported (Dynamic RAM Allocation)
MMC Password is now saved before FULL Factory Reset is done on Normal Phone
Life Timer Locations added for Newest BB5 Phones
Partition Block Parsing Fixed for Newest BB5 Phones
USB Full Phone Info Sweep Fixed for Symbian ^3 Phones
USB Phone Polling when Drivers are still Installing Fixed (Windows 7 32-bit/64-bit)
Known Issues:
Rapido Mass Memory Flashing via USB should use "Skip ADL Chk" Option
Some New RAPUYAMA Phones Cannot Be Flashed with "Nitro" Mode... Use "Turbo" for E6-00 and X5-01...
Update Summary:
Mass Memory Flashing for ALL BB5 Phones via FBUS or USB is 100% Supported (First and Only In The World)
FBUS Mass Memory Flashing is Faster than FPS-21 and Phoenix USB !!! (Fastest In The World)
All Currently Released Infineon Nokia Phones are 100% Supported and Fully Tested (First and Only In The World)
Now You can flash Dead Rapido Phones (with fully erased PAPUBKEYS) via USB
Don't Settle for Second Hand Solutions...
Get them from the Source... Get them from ATF!!!
Be Professional... Be Ahead... Be ATF !!!
A.T.F... Always The First!
Nokia Releases Official Flash File Downloader !!!
Now here's a very Handy and Official Tool for Downloading MCU, PPM, CNT and Even MASS MEMORY Flash Files on all NEW BB5 Phones !!!
It has MORE FILES THAN NAVIFIRM or NAVIFIRM+
Nokia Data Package Manager Lite is a service software tool which provides following functions:
---> Real Time downloading of product software files via online connection from Nokia Firmware Repository (FiRe)
---> Search function and creation of filters for the data you need to download.
---> Checking and organizing your locally installed product software content.
The purpose is to stop the delivery of separate Care Data Packages, and continue software content delivery
via online connection. Please note that you can also download software content from FiRe by using the "Data
Package Download" - function in Phoenix service software, or by using care Suite Product Support Tool in Online mode.
Download Link Here:
Download NokiaDataPackageManagerLite-2011_24_1.msi from mirrorcreator.com
. -
.::nannocell12::. .
User deleted
ATF Read Flash + SL3 Server + Infineon Mass Memory v7.70 Update!! 24 AUG 2011!!
BB5 Major Functions Added:
Read Flash Enabled for RAPUYAMA Phones via USB or FBUS
Read Flash Enabled for RAP3Gv40 Phones via FBUS and USB (USB Limited to 8MB per Session)
Read Flash Enabled for RAPIDO Phones via FBUS ONLY
Extract Phonebook Contacts from Symbian ^3 and Symbian Anna Flash Dumps made by the Read Flash Function
Supports International Unicode Characters for Contacts Extraction (Chinese, Arabic, Thai etc...)
Recover Videos, Pictures, Music and Documents from ALL Flash Dumps made by the Read Flash Function
SL3 Bruteforce Server Added:
SL3 Bruteforce JOB Uploading is now OPEN to ATF Network Users (Paid Service... Contact Your Reseller)
Upload JOBS, Cancel JOBS and Check JOB Status with just a click of a button
Only accepts "JOB" files generated by ATF Software's Decrypt PM 120 Function
Infineon Major Functions Added:
Mass Memory (SD Card) Flashing Added for the NEWEST Infineon Phones (C2-02, C2-03, C2-05, C2-06, C2-07 and C2-08)
Common Updates:
New BB5 Flash Loaders Version 11.24.000.3
New Nokia Connectivity Driver 7.1.42.0
Support Site Updates:
Special ATF ENO Files are NOW AVAILABLE for new RAPUYAMA PHONES (N8-00, C7-00, X7-00, E7-00 etc...)
These ENO Fies were Dumped by the ATF Team and you can ONLY FIND them at the ATF Support Site
Bug Fixes:
E6-00 and X5-01 Nitro Flashing Speed FIXED
Rapido ADL Flashing Bug for E71, E63 etc.. FIXED
USB ADL Flashing Format Partitions FIXED
BB5 Booting Speed FIXED
MMC Password Reading now Supports Unicode Characters
Frequently Asked Question:
Q: Do I need to pay ATF Network Activation in order to use the READ FLASH Functions of ATF 7.70 ?
A: NO, this new Feature is FREE.
Q: Do I need to pay Credits if I want to upload a Bruteforce JOB File ?
A: Yes, Contact your Reseller for more Infomation.
Q: How Long Does it take to Read FULL Flash an N8-00 with a 1 Gigabyte Flash Chip ?
A: Via USB, it will take about 12 minutes... Via FBUS, it will take MANY + MANY HOURS...
Q: Can I Read FULL Flash a 5130c or a 3110c Phone?
A: No. As of now, RAP3Gv3 Phones are NOT YET Supported... But it will be!
Q: Can I Recover My Contacts from a DEAD 5800 phone?
A: No, only Symbian^3 and Symbian Anna Flash DUMPS are Currently Supported for Phonebook Extraction. We will first Support the Latest most HIGH END phones before proceeding to the OLDER Models.
Q: Will you support ALL Symbian S60 Contacts Recovery in the Next Updates ?
A: Yes, we will support them when we have more time.
Q: Can I recover Picture and Videos from my DEAD 5800 Phone ?
A: Yes, ALL BB5 Phone DUMPs are supported for FILE Recovery just as long as they are not reformatted.
Q: I have a DEAD 5800 Phone and I have Flashed it a FEW TIMES already but it is still dead... Can I still DUMP the Pictures and Videos from it?
A: Flashing will most likely REFORMAT the Phone... So your chances of Retrieval are Lower. Then Best thing to do is to DUMP the Flash first before trying to FIX it via Flashing. If the FILES inside the Phone are very important, then you should always AVOID Flashing before you try to RECOVER the IMPORTANT FILES.
Q: Why is FBUS Flash READING VERY Slow and USB Flash READING VERY FAST ?
A: Because of HARDWARE Limitations on the FBUS Channel, the READ Speed is severely Compromised.
Q: Can I Flash Read a Phone with a Special Language PACK inside and use the Flash DUMP to put the Special Language PACK to my other Phones ?
A: This is possible, only if the ROOT HASH is the SAME, but it still REQUIRES you to have Knowledge on how to convert BINARY DUMPS into FPSX Formatted BB5 Files.
Q: What is the MAIN PURPOSE of READ FLASH ?
A: To RECOVER IMPORTANT Files from a DEAD Phone... Just like RECOVERING IMPORTANT Files from a CORRUPTED SD CARD.
ATF Read Flash + SL3 Server + Infineon Mass Memory v7.70 Update!! Public Discussion Thread:
ATF Read Flash + SL3 Server + Infineon Mass Memory v7.70 Update!! Public Discussion:
ATF [Advance Turbo Flasher] official web sites:
International - www.advance-box.com/
ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com
The Master Piece. -
.::nannocell12::. .
User deleted
BB5 Broadcom Unlock !! By ATF TEAM!!
Decrypt PM 120 HASHES for ALL Broadcom BB5 Phones
Bruteforce Unlock for ALL Broadcom BB5 Phones (via ATF Server or via LBF Servers)
Stand Alone Super Dongle Repair for ALL Broadcom BB5 Phones
Stand Alone SX-4 Authorize for ALL Broadcom BB5 Phones
Full Phone Authorization via ATF Network for ALL Broadcom BB5Phones
Read FULL NAND Chip Flash for ALL Broadcom BB5 Phones
Now The ATF Network Supports ALL BB5 CPUs Released By Nokia!!!
Here is a List of Broadcom Based BB5 Phones:
C3-00 RM-614
X2-00 RM-618
X2-01 RM-709
X2-03 RM-709
X2-01.1 RM-717
2710c RM-586
7020 RM-497
************************************************** ********************************
*** IMPORTANT NOTES ABOUT BROADCOM AUTHORIZE PHONE VIA THE ATF NETWORK ***
************************************************** ********************************
1. Since NO other team can even Dream of releasing Broadcom Loaders before ATF Team, all Broadcom Phones Authorized by The ATF Network will require 5 ATF Network Credits.
*** Note that it requires 5 ATF Network Credits and NOT 5 SL3 BF Credits...
2. You NEED ATF Network Activation in order to:
a. Authorize Phone
b. Decrypt PM 120 Hashes for BF Unlock
c. Stand Alone Super Dongle RPL Repair
d. Stand Alone SX-4 Authorize
3. You DO NOT NEED ATF Network Activation if you just want to:
a. Read FULL NAND Flash Chip and extract files etc...
4. If you Authorize a Broadcom Phone more than 1 time, then you will be charged and charged again and again and again with 5 credits each time.
5. Some Broadcom Phones will get stuck when Reading Phone info in Normal Mode. The correct way to do it is to change phone mode to TEST MODE before attempting to Decrypt PM 120 HASHES, Super Dongle Repairs etc...
Here is a QUICK way on How to Correct Set a Broadcom Phone into TEST MODE from Normal Mode (RF Inactive) Condition.
a. Put Battery to Phone and Power it On
b. Connect USB Cable and Connect to PC
C. Wait while Windows is Installing the Drivers...
d. Go to ATF Software "Settings" --> "Nokia Settings"
--> Put a check on "Skip Full Phone Information Sweep for BB5 Phones"
e. Go back to "Nokia Service" and click Scan Phone...
*** Once the phone is detected, you can select "Test" on that DropDown
list on the LEFT SIDE of "Backup RPL" Button. This will make your
Phone enter into TEST MODE....
************************************************** ********************************
************************************************** ********************************
************************************************** ********************************
What Else Is New?
N900 FIASCO Flashing has been moved from iTablets into the BB5 Section.
--> Now you can Flash N900 just like any other BB5 Phone... Super EASY!
--> The Current MAEMO Flash ENGINE does not support EMMC (VANILLA) Flashing Yet, this will be Ported on the Next Update.
What was Fixed?
1. Infineon Self Test Hang on Exit: FIXED!
2. Box Activation (Activate New Box) FIXED!
Whats Up?
Try using the XFactor.skn skin... it Rocks!
__________________________________________________ ________________________
BB5 Broadcom Unlock ATF v7.90 Update!! Public Discussion Thread:
BB5 Broadcom Unlock ATF v7.90 Update!! Public Discussion Thread:
ATF [Advance Turbo Flasher] official web sites:
International - www.advance-box.com/
ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com
The Master Piece
Report Post
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiShare on FacebookTwitterStumble this Post!
Edited by .::nannocell12::. - 4/11/2011, 12:18. -
WILUNLOCK .
User deleted
ATF Update v8.95 - Nokia N9 SP Unlock support 
Special Features (Requires ATF Network Authorization):
--> N9-00 RM-696 SL3 Unlock via Brute Force (Decrypt PM 120)
--> N9-00 RM-696 Super Dongle Repair
--> N9-00 RM-696 SX-4 Authorization for entire PM Area (Except PM 308)
--> ALL N9-00 Special Features ONLY NEED USB CABLE Connection
Flashing Updates:
--> NONE
Bug Fixes:
--> Fixed Authorize Phone via FBUS ERROR
User Notes:
1. If you want to do any PM WRITE functions to N9 Phones, you must
first unlock the entire PM Area via SX-4 Authorization because the
ENTIRE PM AREA is Protected by SX-4.
Example, if you want to reset FBUS/KEYPAD Lock Counters, you need
to SX-4 Authorize the Phone first.
2. I will repeat this again, because it seems some people claim that
they can read Security Code from N9-00 very easily....
The SECURITY CODE read by SCAN PHONE is NOT THE Phone Lock
Code. The Phone lock code is running on the OMAP APE Side and the
SECURITY CODE is for the CMT side, which is practically useless.
3. This is very very IMPORTANT! All N9-00 phones will NOT ACCEPT
NCK Codes via KEYPAD Entry because you will NOT GET "w" if you
want to type #pw+123456789012345+7#...
So it would be EASIER for you to just enter the NCK Codes via USB
Cable.
Or you can also try to ENTER the NCK Code via the Phone Menu:
SETTINGS - DEVICE - SIM CARD - ENTER UNLOCK CODE
Personally, I did not try this method, and it requires that there should
be a SIM Card inserted to the phone...
( 4. ATF is the ONLY tool which supports Nokia N9 SP Unlock
( No Regards to COPY-PASTERS ). -
alexnow24 .
User deleted
ATF SL3 Simlock Recovery v9.0 Update!! Discussion Thread:
Introducing The ATF Simlock Recovery Module v1.0
Introduction:
In the past, when a dead Nokia BB5 SL3 Phone comes to your shop, it was only
possible for you to backup the IMEI via a Backup RPL Function. There was no
way for you to backup a possibly 100% working SIMLOCK inside the phone because
you needed Local/Test Mode in order to get the PM Backups. Dead Phones cannot
give you Local/Test Mode at all, so you cannot backup the Simlocks even if you
wanted to.
Now here comes the Solution... The ATF Simlock Recovery Module v1.0 will allow
you to BACKUP SIMLOCKS from a DEAD PHONE! Just a 1-click solution for Recovery
Level 1 and Level 2 for NON-CORRUPTED SIMLOCKS on a DEAD PHONE.
Even if your phone SIMLOCKS are CORRUPTED, The ATF Network can still attempt to
perform a Level 3 Recovery from it, but it will cost you some ATF SL3 Credits.
Here is a Short Description about the three Simlock Recovery Levels:
Recovery Level 1:
* FREE for ALL ATF BOX Users (DOES NOT NEED CREDITS or ATF NETWORK ACTIVATION)
* Phone DOES NOT need to be AUthorized
* 100% Stand Alone
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from DUMP FILE or from Connected PHONE
* Super Fast Recovery, BUT SIMLOCKS WILL NOT BE VERIFIED
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 70% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP
Recovery Level 2:
* FREE for ALL ATF Network Users (DOES NOT NEED CREDITS)
* Phone NEEDS to be Authorized via The ATF Network
* Stand Alone ONLY AFTER PHONE IS AUTHORIZED via The ATF Network
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY + RECOVER ORIGINAL SIMLOCKS if SIMLOCKS are OVERWRITTEN)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from Connected PHONE ONLY
* Recovery Time will depend on Fragmentation Level of the XSR Blocks
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 95% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP
Recovery Level 3:
* Needs SL3 Credits and only available for ATF Network Activated Users
* Phone NEEDS to be Authorized via The ATF Network
* Recovery is performed by our Servers (NOT STAND ALONE)
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 NOR Blocks for RAP3Gv3
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recovery Time will depend on CURRENT TASK LOAD on the ATF Simlock Recovery Server
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* POSSIBLE TO SUPPORT OVERWRITTEN PM 120 Blocks with Wrong PM 120 Blocks
* POSSIBLE TO SUPPORT FULLY ERASED PHONES
* DOES NOT SUPPORT WRONG FLASHED PHONES with WRONG FIRMWARE (Repartitioned NANDs)
* SUCCESS RATE = 95% if the Phone is not wrongly Repartitioned by a wrong Firmware
IMPORTANT INFORMATION:
1. Level 1 Recovered Simlocks are NOT VERFIED to be Working (NOT GUARANTEED)
2. Level 2 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK
3. Level 3 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK
Summary:
If your phone is DEAD, but the SIMLOCKS are 100% OK, then the ATF Simlock
Recovery Module will recover your simlocks for you via Recovery Level 1 or 2.
If your phone is DEAD, and the SIMLOCKS are possibly corrupted, then the
ATF Simlock Recovery Module will recover your simlocks for you via Recovery
Level 3 + ATF SL3 Credits.
Box Firmware Update:
New ATF Firmware LogiCore 10.3.15 for ATF Chrome, ATF Lightning and ATF Nitro Boxes
Other Updates:
* MEEGO PHONE Authorization EVEN IF 20-digit SL3 Code is detected.
* Shows full RPL (Certificates) Information during Backup RPL on BB5 Phones.
--> Checks Original IMEI
--> Checks Original Product Code
--> Checks PA_PUBLIC_ID
--> Checks PA_PUBLIC_KEYS_HASH
--> Checks Original BT ID
--> Checks Original WLAN ID
* New option in Settings "Select USB Connection by Default when ATF Software Starts"
* Cross Flashing is now IMPOSSIBLE if Phone has good IMEI (NO MORE WRONG FIRMWARES)
* Flash File CRC32 is now CHECKED BY DEFAULT on Flash Files downloaded from NaviFirm etc...
* Other small tweaks which I already forgot to mention...
. -
.
Unlock Directo Lumia 7.X
TF Lumia 7.x Direct Unlock v9.30 Update!! 10 Dec 2012!
Advance Turbo Flasher v9.30
Release Date: December 10, 2012
Firmware Version Required : 10.3.30
[MAJOR UPDATE]
Introducing The Lumia Windows Phone 7.x eMMC Direct Module
Main Qualcomm OSBL Functions:
- Direct Unlock Lumia 710 via USB Cable (Qualcomm OSBL Only, DLOAD OSBL NOT SUPPORTED)
- Direct Unlock Lumia 800 via USB Cable (Qualcomm OSBL Only, DLOAD OSBL NOT SUPPORTED)
Other Qualcomm OSBL Functions:
- Direct Write OSBL original ESCO File Format via Qualcomm OSBL
- Direct Write Windows 7.x OS (boot.img) ESCO File Format via Qualcomm OSBL
- Direct Read/Write all Partitions in the Master Boot Record
- Backup/Restore PMM, Simlocks, Certificates and RPL
- Change Product Code
- Repair Corrupted AMSS Problems after TP Boot Repair
- Direct Write Custom Firmware to WP_OS Partition
All eMMC Direct Functions requires Qualcomm OSBL.
If you have a Lumia 710 with DLOAD OSBL, you can flash the Phone via USB to get Qualcomm OSBL.
If you have a Lumia 800 with DLOAD OSBL, you need to use TP Method and write QCOM OSBL via TP.
If you have Lumia Lumia 510, 610 or 900, then you cannot use eMMC Direct Module on them.
IMPORTANT INFORMATION
- You need "Administrator Rights" if you want to use the eMMC Direct Module.
Easiest way to get Administrator Rights is to go to C:AdvanceBox Turbo Flasher
then RIGHT-CLICK Mouse on "AdvanceBox.exe", then select:
--------> 'Run as administrator'
You need to do this everytime you want to use the eMMC Direct Module
. -
.
ATF v9.70 Update!! 25 MAR 2013!!
Release Date: March 25, 2013
Firmware Version Required : 10.3.50
ATF Box New Firmware LogiCore 10.3.50 Official Release
--> Support ATF JAM (JTAG Access Module)
--> Support ATF SAM (Samsung Access Module)
More info about ATF JAM and ATF SAM will be released very soon!
What's New ?
* Added "Create ENO FPSX" button in 'Read Flash' tab which will allow
you to extract ENO Blocks from FLASH DUMPS made by ATF Software. The resulting ENO File will be in Plain FPSX format and can be used on
phones which have the same ROOT_KEY_HASH as the original FLASH DUMP.
Normally, Dumping the first 16 MB of the Flash Chip is enough to
extract the ENO Blocks. If the ENO cannot be found, then try 32 MB.
* SD Card Password BF Unlock now supports Customized MASK Files so
you can make your own MASK files using any Unicode 16-Bit (2 bytes)
characters. This will allow you to BruteForce NON-ENGLISH/LATIN
characters. More info about Unicode here:
List of Unicode characters - Wikipedia, the free encyclopedia
You can check our support forum for a STEP-BY-STEP instruction on
how to create and use your own MASK Files.
* Updated Lumia 505 RM-923 Repair Boot Files
* Uploaded Lumia 505 RM-923 Test Point Pictures
Bug Fixes:
* Fixed Lumia 505 RM-923 detection as Windows 7.8 Phone
* Fixed Lumia Custom eMMC Read/Write file handler
* Fixed Lumia eMMC Direct Drive Number Detection
Other Stuff
* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of March-25-2013)
* Complete Product Listing in Nokia.ini (as of March-25-2013)
For this Update we give Special Thanks To:
dj kidd (Mexico) for Sending Lumia 505 Phone
WAJID (Dubai) for Beta Testing
Angel for reporting Bugs
download 4shared
download mediafire.
FORO EXCLUSIVO UPDATES ATF |
