-
The_Colombian_Team
.User deleted
RIFF BOX - ROVER PC EVO V7, MARVELL PXA3XX Generic NAND DCC Loader
21.03.2011 RoverPC EVO V7 Unbrick – Dead boot repair supported
RoverPC Evo V7 resurrection is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect RoverPC Evo V7:
Solder JTAG cable to RoverPC Evo V7 JTAG pads;
Connect USB cable to phone and PC;
Make sure RoverPC Evo V7 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original firmware downloader software to restore it to the working state.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On.
21.03.2011 MARVELL PXA3XX NAND Generic DLL Released
Resurrector PXA3XX contains only NAND DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU's internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.
21.03.2011 - RIFF Box Firmware v1.21
Firmware 1.21
---------------------------
Added RX-polling feature (debugger-to-target) for PXA3XX DCC transfers.
RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for PXA3XX target to be ready to accept
next packet over DCC: this feature slows down a little the JTAG-to-Target DCC
transfers but guaranties no packets loss for slow clocked targets;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
.
FORO EXCLUSIVO UPDATES RIFF |
