-
.
RIFF Box Firmware v1.45, RIFF JTAG Manager v1.69 eMMC Plugin v3.02 released
Firmware 1.45
---------------------------
- Added MassStorage Mode for RIFFBOX2
JTAG Manager 1.69
---------------------------
- Fixed the bug for General Purpose Partition Sizes
- Added feature to switch ON/OFF the MassStorage Mode. For this, please connect an eMMC (either via Direct or ISP interface),
make sure it is detected (on the "eMMC/SD Card" page), and on the 'eMMC/SD Advanced' dialog click the 'MassStorage Mode ON/OFF' button to setup which partitions are to be mounted.
Please note, for stable connection, first of all do reads on the "eMMC/SD Card" page to adjust stable Frequency, BusWidth and Voltage.
After you click "MassStorage Mode ON/OFF" button, current settings for Voltage, Frequencty, BusWidth will be written into RIFFBOX non-volatile memory,
and while the MassStorage mode is ON, upon each connection to USB the RIFFBOX will additinally to normal Control interface enumarate the MassStorage Disks (as if a FlashStick is connected to PC)
eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v3.02
-------------------------------------
- Added support for User Area Partition bounds selection from the JTAG Manager's MassStorage settings dialog
- Added file system detection: the plugin analyzes the partition's data structure to autodetect what file system (if any) is used. The result is displayed in the new "F/S" row
..
To mount EXT/x partitions You should install EXT FS driver from here:. -
andrew713.
User deleted
RIFF JTAG Manager v1.73, RIFF Firmware v1.47 Mass storage mode support for RIFF Box
RIFF Firmware 1.47
MassStorage Mount/Dismount support for RIFFBOX1 is added.
Working with special eMMC vendor features (like dedicated Samsung eMMC Chips commands) is re-organized.
Due to high risk of erasing User/Boot areas on the eMMC chips which are not Samsung, the Samsung chips autodetection is completely removed.
To access special Samsung eMMCs features (like firmware update, factory reset, etc) User must manually select Vendor Mode.
RIFF1 & RIFF2: Finally!!! The eMMC/SD Erase Operation (for Direct/ISP connection) finally is implemented!!!
RIFF JTAG Manager 1.73
MassStorage mount/dismount feature is reworked and improved. Now is possible to Mount/Reconfigure/Dismount the MassStorage via the same dialog.
The MassStorage settings are read from the RIFFBOX, so it is much more convenient in case users need to mount/dismount same eMMC Area ocasianlly or to adjust eMMC connection parameters for better stability.
MassStorage Mount/Dismount support for RIFFBOX1 is added.
Working with special eMMC vendor features (like dedicated Samsung eMMC Chips commands) is re-organized (see the Firmware 1.47 notes)
Finally!!! The eMMC/SD Erase Operation (for Direct/ISP connection) is implemented!!!
JTAG Manager 1.72
New method of resurrectors grouping is added.
Setting ISP Resurrectors shows only the ISP available DLLs; Setting ISP Resurrectors shows only the packages (PKG files); setting JTAG Resurrectors shows only the JTAG available DLLs
Setting ALL Resurrectors shows all available DLLs same as is done in JTAG Manager 1.71 and lower.
Fixed bug for correct setting of the recommended SD/MMC VCCIO voltage for ISP DLLs: when model is selected, the JTAG Manager adjusts the frequency, voltage and other settings to match (if possible) those values, which are hardcoded into resurrector DLL.
List of newest repair DLL-s with ISP support:
LG F240L,
Asus ZenFone2 (ZE551ML),
Huawei Honor 4C (CHM-U01) ISP
Nokia lumia 530 ISP
Samsung I9305 ISP
Samsung J105H ISP
Samsung N8000 ISP
Samsung P5100 ISP
Samsung T531 ISP
Samsung G361H ISP
Samsung I9300 ISP
Samsung I9300I ISP
Samsung I9301I ISP
Samsung i9070 ISP
Samsung i8552 ISP
Samsung n7000 ISP
Samsung i9192 ISP
Samsung i9060 ISP
Samsung G318H ISP
HTC Flyer ISP
HTC Desire 326G ISP
ZTE V811 ISP. -
.
15.09.2017 RIFF Box updates - Xiaomi REDMi 4A !
Hello,
Newly released ISP DLL-s:
- Samsung A310F
- Samsung I9190
- Samsung J320H
- Samsung P3100
- Samsung T989
- Xiaomi Redmi 4A
Please click "Check for Updates" button to download newest set of repair DLL-s.. -
andrew713.
User deleted
22.09.2017 RIFF Box updates - more ISP models support
Hello,
Following DLL-s are uploaded to support area:
Acer Liquid Z330
HTC OneM7 (PN0710000)
Lenovo K910
Samsung A500K
Samsung J510FN
Samsung N7100
Sony C1605
ZTE_V880E
To download and install newly released updates, start RIFF JTAG Manager, go to Box Service TAB and click "Check for Updates" button.
Edited by Caldasunlockgsm - 22/9/2017, 19:55. -
andrew713.
User deleted
Hello dear RIFF Box users !
We're proud to announce newest updates for RIFF Box v1 and RIFF BOX v2:
RIFF Box Firmware v1.48
---------------------------
- New SD/MMC Interface is added for RIFF1: the CPLD is used for data shifting at max 8MHz rate.
As the eMMC signals the TDI, TMS, RTCX, and TDO signals on JTAG Connector are used. Read/Write speeds at 8MHz are aprroximately 800KB/sec - read, 365KB/s - write.
Since the new SD/MMC Interface shares the JTAG port connector, in the JTAG Manager in the SD/MMC Interface list, it is named as 'JTAG';
- The eMMC Read/Write speeds for GPIO (RJ-45) SD/MMC Interface are increased: 260KB/s - read, 360 KB/s - write (compare with Firmware 1.47: ~198 KB/s - read, 190 KB/s - write)
- The eMMC Read speeds for RIFF2 (30PN) SD/MMC Interface are increased: at SD/MMC Clock Speed = 34MHz: ~9.50MB/s - read (compare with Firmware 1.47: ~7.80 MB/s - read)
- The eMMC Write speeds for RIFF2 (30PN) SD/MMC Interface are increased more than 20x(!!!) times: at SD/MMC Clock Speed = 34MHz: 6.40MB/s - write (compare with Firmware 1.47: ~390 KB/s - write)
RIFF JTAG Manager v1.74
---------------------------
- ExtCSD Register's fields 177, 179 and 162 (BOOT_BUS_CONDITIONS, PARTITION_CONFIG, and RST_n_FUNCTION) are now displayed in eMMC connection info ("Check eMMC/SD Card" button or eMMC Advanced Actions Dialog's "Read Info from eMMC")
- Added selection of SD/MMC H/W Interface: currently are available:
> 1. RIFF1 SD/MMC Interface @RJ45 Connector
> 2. RIFF1 SD/MMC Interface @JTAG Connector
> 3. RIFF2 SD/MMC Interface @30-Pin Connector
- Added real-time RIFFBOX status (in StatusBar): the BOX revision (RIFFBOX1/RIFFBOX2) and Firmware version
- Improved switching on-the-fly of the JTAG Manager's specific to RIFFBOX revision parameters, immediately when the new box is connected to PC while JTAG Manager is running.
- Schematics picture is updated (RIFF JTAG Pinout button on the Resurrection page). Schematics picture is now displayed depending on the box revision - RIFFBOX1 or RIFFBOX2.
- Fixed buffer overrun bug in RIFF2 firmware, which caused getting chaotically corrupted data during the eMMC Read operations
- Added one-time Start Trial Period feature for RIFF v1 users
RIFF Remote Helper v1.10
----------------------------
- Added support for RIFF v2 hardware
- Added support for new drivers
- Remote Helper is now included with setup package by default.
You can download new files from RIFF Box home page:
www.riffbox.org
- RIFF Box v1 SD/eMMC interface via JTAG port (CPLD):
In order to maximize read/write speed on v1 hardware, we decided to update CPLD firmware and use 20 pin port to connect SD/eMMC to RIFF Box.
Please note that RJ45 port remains functional, too.
- One Time Trial for v1 users:
For those users with expired accounts, who want to test new features for free, we added optional function. Upon connecting to RIFF Box license server, You'll be prompted to activate Trial Period (15 days) which will enable Your box with all current updates and functions.
- Support activations are permanent from now.
All users who activate their account will get "Forever" status (Including those who activated support in last 3 months). This means that there will be no more account expiration.
Edited by Caldasunlockgsm - 3/11/2017, 14:01. -
andrew713.
User deleted
RIFF Box updates (170 + new models added)
Hello,
RIFF Box updated files list (170 + models supported)
Please take note about some changes in RIFF Box support.
- Web download server (self registration required with working e-mail address)
- Frequency of updates increased
- Technical support at RIFF Box official forum (Support tickets)
Please see bellow list of uploaded Boot repair packs in last few weeks:
HTC Models Boot repair, Read/Write eMMC ISP pinout
HTC_OneA9u_2PQ910000_ISP.dll
HTC_OneM8y_0P6B63000_ISP.dll
HTC_OneM9u_0PJA10000_ISP.dll
HTC_OneS9u_2PRG20000_ISP.dll
HTC_OneX9u_2PS510000_ISP.dll
HTC_SensationXL_PI3920000_ISP.dll
Huawei Models Boot repair, Read/Write eMMC ISP pinout
Huawei_P7_L10_ISP.dll
Huawei_P8_Lite_ISP.dll
Huawei_U8860_ISP.dll
Lenovo Models Boot repair, Read/Write eMMC ISP pinout
Lenovo_A1000F_ISP.dll
LG Models Boot repair, Read/Write eMMC ISP pinout
LG_AS330_ISP.dll
LG_D160_ISP.dll
LG_D280n_ISP.dll
LG_D285_ISP.dll
LG_D290n_ISP.dll
LG_D295_ISP.dll
LG_D295F_ISP.dll
LG_D320n_ISP.dll
LG_D325_ISP.dll
LG_D380_ISP.dll
LG_D390n_ISP.dll
LG_D410_ISP.dll
LG_D410HN_ISP.dll
LG_D605_ISP.dll
LG_D618_ISP.dll
LG_D625_ISP.dll
LG_D631_ISP.dll
LG_D722V_ISP.dll
LG_D724_ISP.dll
LG_D821_ISP.dll
LG_D838_ISP.dll
LG_D851_ISP.dll
LG_D855_ISP.dll
LG_D856_ISP.dll
LG_E980_ISP.dll
LG_F100L_ISP.dll
LG_F100S_ISP.dll
LG_F160LV_ISP.dll
LG_F240K_ISP.dll
LG_F350S_ISP.dll
LG_F440L_ISP.dll
LG_F460K_ISP.dll
LG_F670L_ISP.dll
LG_H324_ISP.dll
LG_H345_ISP.dll
LG_H410_ISP.dll
LG_H422_ISP.dll
LG_H443_ISP.dll
LG_H525n_ISP.dll
LG_H631_ISP.dll
LG_H635_ISP.dll
LG_H734_ISP.dll
LG_H788_ISP.dll
LG_H790_ISP.dll
LG_H811_ISP.dll
LG_H815_ISP.dll
LG_H818P_ISP.dll
LG_H845_ISP.dll
LG_H901_ISP.dll
LG_K120K_ISP.dll
LG_K330_ISP.dll
LG_K550_ISP.dll
LG_K600_ISP.dll
LG_L23_ISP.dll
LG_L24_ISP.dll
LG_LMX210MA_ISP.dll
LG_LS450_ISP.dll
LG_LS660_ISP.dll
LG_LS665_ISP.dll
LG_LS675_ISP.dll
LG_LS740_ISP.dll
LG_LS770_ISP.dll
LG_LS775_ISP.dll
LG_LS777_ISP.dll
LG_LS885_ISP.dll
LG_LS990_ISP.dll
LG_LS991_ISP.dll
LG_LS996_ISP.dll
LG_LU620_ISP.dll
LG_M200N_ISP.dll
LG_M250N_ISP.dll
LG_M320_ISP.dll
LG_M400DY_ISP.dll
LG_MS210_ISP.dll
LG_MS323_ISP.dll
LG_P715_ISP.dll
LG_P765_ISP.dll
LG_P769_ISP.dll
LG_P930_ISP.dll
LG_SU870_ISP.dll
LG_TP450_ISP.dll
LG_US215_ISP.dll
LG_US550_ISP.dll
LG_V520_ISP.dll
LG_VS410PP_ISP.dll
LG_VS425LPP_ISP.dll
LG_VS810PP_ISP.dll
LG_VS880PP_ISP.dll
LG_VS930_ISP.dll
LG_VS986W_ISP.dll
LG_VS990_ISP.dll
Motorola Models Boot repair, Read/Write eMMC ISP pinout
Motorola_XT1021_ISP.dll
Motorola_XT1022_ISP.dll
Motorola_XT1030_ISP.dll
Motorola_XT1032_ISP.dll
Motorola_XT1034_ISP.dll
Motorola_XT1064_ISP.dll
Motorola_XT1068_ISP.dll
Motorola_XT1097_ISP.dll
Motorola_XT1541_ISP.dll
Motorola_XT1550_ISP.dll
Motorola_XT1562_ISP.dll
Motorola_XT1563_ISP.dll
Motorola_XT1642_ISP.dll
Motorola_XT1676_ISP.dll
Motorola_XT1706_ISP.dll
Motorola_XT1723_ISP.dll
Nokia Models Boot repair, Read/Write eMMC ISP pinout
Nokia_Lumia_930_ISP.dll
Pantech Models Boot repair, Read/Write eMMC ISP pinout
Pantech_A760S_ISP.dll
Pantech_A860L_ISP.dll
Pantech_A860S_ISP.dll
Pantech_A870L_ISP.dll
Samsung Models Boot repair, Read/Write eMMC ISP pinout
Samsung_A710F_ISP.dll
Samsung_E110S_ISP.dll
Samsung_E170K_ISP.dll
Samsung_E170L_ISP.dll
Samsung_E250L_ISP.dll
Samsung_E270K_ISP.dll
Samsung_E300K_ISP.dll
Samsung_E310L_ISP.dll
Samsung_G313H_ISP.dll
Samsung_G318HZ_ISP.dll
Samsung_G360H_ISP.dll
Samsung_G530H_ISP.dll
Samsung_G531F_ISP.dll
Samsung_G570F_ISP.dll
Samsung_I317_ISP.dll
Samsung_I8190_ISP.dll
Samsung_I8262_ISP.dll
Samsung_I9100_ISP.dll
Samsung_I9105_ISP.dll
Samsung_I9195_ISP.dll
Samsung_I9505_XXUHPK2_ISP.dll
Samsung_I9515_XXU1ANK2_ISP.dll
Samsung_J120F_ISP.dll
Samsung_J210F_ISP.dll
Samsung_J500F_ISP.dll
Samsung_J500FN_ISP.dll
Samsung_J700H_ISP.dll
Samsung_M380S_ISP.dll
Samsung_P3110_ISP.dll
Samsung_P3113_ISP.dll
Samsung_P601_ISP.dll
Samsung_S5282_ISP.dll
Samsung_S6790_ISP.dll
Samsung_S7562_ISP.dll
Samsung_T211_ISP.dll
Samsung_Z130H_ISP.dll
Samsung_Z130H_R07_ISP.dll
Sony Models Boot repair, Read/Write eMMC ISP pinout
Sony_C1504_ISP.dll
Sony_D5503_ISP.dll
Sony_D5803_ISP.dll
Sony_E2303_ISP.dll
Sony_E2333_ISP.dll
Sony_E2353_ISP.dll
Sony_E5563_ISP.dll
Sony_F3111_ISP.dll
Sony_LT26I_ISP.dll
Sony_LT26II_ISP.dll
Sony_LT28H_ISP.dll
Sony_ST25_ISP.dll
VolksWagen Audio head: (JTAG)
VolksWagen_RCD330GPlus.dll
XiaoMi Models Boot repair, Read/Write eMMC ISP pinout
Xiaomi_Redmi4X_ISP.dll
Xiaomi_RedmiNote4X_ISP.dll
To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:
RIFF Box v1 (Black box) users who havent used 15 days trial can activate it after installing JTAG Manager v1.76 and downloading new data.
In case that trial period is used but fw version is still 1.48 or older, please request trial reset in "Account recovery" section.
Box S/N and "Trial reset" required.
Report Post. -
andrew713.
User deleted
RIFF Box eMMC Plugin - File System explorer for MTK added
Hello,
Please download latest version of our great tool - eMMC Plugin v4.08.
Whats new:
Added full support for MTK internal partition descriptor
Added support for MTK MBR/EBR
Added file system explorer support for MTK models
Added manual selection of parsing method - now its possible to force parsing GPT/MBR in Samsung flash dumps (useful in cases with preloader in boot partition 1)
Added manual selection to force MTK MBR/EBR parsing instead of MTK Internal partition layout parsing.
Lets review most important functions present now:
File systems and partitions:
File system explorer which supports EXT2/EXT3/EXT4 and FAT32
Exporting detected partitions in raw binary format
Exporting detected partitions as logical drive
Exporting single files from file system in selected partition
Boot loaders, EFS, NVRAM or any other important partitions manipulation:
Load Full flash dump and export partitions to separate files
Load full flash dump and write GPT or any other partition to another eMMC chip
Load GPT and inject binary files into designated partitions (for example load boot loader files from firmware)
Read single partition raw binary
Write single partition raw binary
Build custom flash dump files
Read Product Info partition from HTC models and modify CID/IMEI/Simlock status.
...
Useful tips:
If flash dump with corrupted partition is loaded, "Out of Memory" message may appear after some time. This can be caused by corrupted directory structure where parser enters into loop. In such case, kill the application via task manager, save such partition as binary file and write it to usb flash disk as "disk image". File system repair can be attempted and data salvaged using Windows or Linux tools.
MTK files with MBR styled layout need a bit longer time to be parsed and in case plugin appears to be frozen just give it some time
Please check attached screens. That is full flash dump from MTK based "i9500 clone". -
andrew713.
User deleted
RIFF Box 1/2 updates - JTAG Manager v1.78, eMMC Plugin v4.09, 12 new models
Hello,
RIFF Box v1/v2 updates, 15.05.2018:
RIFF Box JTAG Manager v1.78
---------------------------
- (SDK): more functions are now available (exported) for future Resurrector DLLs;
- PKG Editor: added button 'Visual Conditional Writes' - which helps sorting write actions into specified groups of conditions
Those who have experience in PKG creation will understand the purpose.
- Fixed SD/MMC voltage list for RIFFBOX1
- Fixed correct partition name logging when reading/writting via Direct EMMC interface
RIFF Box v1 users now have option to fine tune VCCIO (VCCQ) voltage in order to achieve best stability.
VCCIO can be increased/decreased in 0.05v steps. We recommend this procedure if nominal 1.8v VCCIO doesn't work properly.
eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v4.09
-------------------------------------
- "Load Firmware Files" button is added. This feature will allow to load official firmware files directly into recognized partitions.
At the release moment only MTK Scatter Files are supported.
- Added MTK Scatter Files support. Please note, to load a Scatter File, first is required for plugin to Load a valid Dump (Load Layout from File or read Layout from Device (Load Layout from Device).
After partitions layout is recognized by plugin, a Scatter File can be loaded: files of partitions listed in scatter file will be automatically injected into current Layout.
- Plugin now supports OTHERS THAN the User Area partition!!!
For example, if after parsing, plugin detects extra used partitions (e.g. boot partition1 in some Samsung phones, boot partition1,2&RPMB in some phones with MTK MCU-based layout)
then these partitions are displayed in the partitions list too. User can work with these partitions as usual - read/write, inject data from file, storing to disk, etc - plugin
will automatically manage data redirection to proper hardware locations of the eMMC chip.
- Added column "LOCATION ON CHIP" - displays hardware location of the current partition inside the eMMC Chip (Boot parition1,2, User Area, etc.)
- Keyboard shortcuts are added for Read Partitions button (F6) and Flash partition button (F7)
- Context menu is expanded with same new minor features (right-click on any partition in the partitions list window)
- 'PRESENT' column is added to the partitions list. This shows info about each partiton - whether partition is available in dump file or dump ends prematurely
(100% - means partition is completely present in dump file, 0% - partition is not present in dump file, between 0 and 100 - partition is partially available, but a definite part of it is not available due to premature end of dump file)
- 'SIZE' column is added to the partitions list. This shows human-understandable size in KBs/MBs/GBs/TBs
- HEX window now supports 'NOT_AVAILABLE' data displaying: the '**' is displayed instead of HEX data for areas when data is not available
(for example this is true when local dump file size is less than current partition address, so the plugin cannot obtain data for such case)
(for example this is true when plugin failed to read data on-the-fly due to read errors)
- Progress bar in HEX window is fixed for chunks of data of size up to ~32GB, but still is not full 64-bit wide, thus weird behaviour is expected for partition sizes more than ~32GB (more than 0x7FFFFFFF0 bytes = 31,9999GB)
- Due to obsolete meaning, removed ACTIVE and SELECTED columns in the parsed partitions list.
- Added new column 'RELATIVE PARTITION' to the parsed partitions list. Plugin now supports relative partitions, base of which depends on connected physical eMMC chip.
Thus the real address is calculated by plugin on-the-fly, during read/write operations.
For relative partitions, 'RELATIVE PARTITION' column shows relative offset from the end of the chip area where partition must be located. In this case the 'STARTING OFFSET' column shows
absolute address calculated at the moment of parsing (that is if partitions were parsed from dump file, the starting offset is calculated using dump's file size; if partitions were parsed from connected emmc device,
then starting offset is calculated using current emmc chip's user area size). This address will be recalculated every time any read/write on this partition is performed.
P.S. Real life relative partitions can be found in MTK-based devices (BMPOOL partition), Samsung phones (SGPT partition)
- added keyboard control to the partitions list window. One can navigate through partitions with keyboard keys,
select/deselect single entry with ENTER key, use INSERT key to select an entry and automatically move cursor down.
In case the plugin is invoked by the JTAG Manager (PKG Editor, MassStorage selector, etc.) the ESC key serves the function of buttons "Back to MassStorage" and "Back to PKG Editor"
- The order of focused controls when TAB key is pressed is sorted correctly.
- Option "When parsing is possible from GPT and PIT, force discarding PIT so GPT data is used" is transfered to CheckBox for better convenience. It is named "PIT Dumps -> Force EFI Layout"
- Option "When parsing is possible from MBR and MTK Tables, force discarding MTK layout, so data from MBR/EBR is used" is transfered to CheckBox for better convenience. It is named "MTK Dumps -< Force MBR Layout"
- Double progress is implemented - to display read/write progress of current partition and total read/write progress of selected group of partitions
- Color of selected text in partitions list window is adjusted
- For MBR/EBR parsing added feature to resize last partition into reasonable size: sometimes last partition is reported having maximum possible size (~2TB).
If layout is read from device then last partition is resized to fit into the current memory chip.
If layout is read from a local dump file then the last partition is resized to fit into the 58.25GB memory chip.
- after parsing supported file system into Embedded F/S Explorer, loss of foreground position of the main plugin window bug is fixed
- 'Check for Blank' operation is made more informative: each partiton checking progress is drawn. Blank partitions are grayed out in the partitions list, so blank partitions are visible instantly.
Checking for blank is improved - partitions which have "NOT_AVAILABLE" data status are considered to be blank and time is not lost doing unnecessary checks (especially big sized partitions)
LG Models boot repair, ISP pinout, Read/Write eMMC:
LG D335
LG E440
LG E445
LG E450
LG K220DS
LG K410
LG K430
Samsung Models boot repair, ISP pinout, Read/Write eMMC:
Samsung A500fU
Samsung G800F
Samsung G900H
XiaoMi Models boot repair, ISP pinout, Read/Write eMMC:
Xiaomi Mi 5X (MDT2)
Xiaomi Redmi Note 5A Prime (MDG6S)
To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:
Index of ../../RIFF/RIFF_ROOT/
RIFF Box v1 (Black box) users who havent used 15 days trial can activate it after installing JTAG Manager v1.76 and downloading new data.
In case that trial period is used but fw version is still 1.48 or older, please request trial reset in "Account recovery" section.
Box S/N and "Trial reset" required.. -
andrew713.
User deleted
RIFF Box v1/v2 updates, 31.05.2018 52 new models
RIFF Box updates, 31.05.2018
Texet TM3204R
Sony Models boot repair, ISP pinout, Read/Write eMMC:
Sony G3221
Sony F3311
Sony F3112
Sony E5363
Sony E2312
Sony D2203
Sony C6903
Sony C6603
Sony C6602
Samsung Models boot repair, ISP pinout, Read/Write eMMC:
Samsung I9506
Samsung I9308
Samsung I9295
Samsung I9250
Samsung I9228
Samsung I9205
Samsung I9200
Samsung I9152
Samsung I9003
Samsung Z300H
Samsung I9001
Samsung I605
Samsung I527M
Samsung G3812
Samsung G900T
Samsung G800F ver2 (ISP Pinout, no desolder)
Samsung G900J
Samsung G900F
Samsung G900A
Samsung G750A
Samsung G600FY
Samsung G532M
Samsung G531H
Samsung G530T
Samsung G530P
Samsung G386W
Samsung G386T
Samsung G386F
Samsung G360T1
Samsung G360T
Samsung G360P
Samsung G360G
Samsung G316HU
Samsung E270S
Samsung C105
Samsung C101
Samsung J100VPP
Samsung J100M
LG Models boot repair, ISP pinout, Read/Write eMMC:
LG P895
LG H791
LG F460S
LG F460L
To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:
Index of ../../RIFF/RIFF_ROOT/
RIFF Box v1 (Black box) users who havent used 15 days trial can activate it after installing JTAG Manager v1.76 and downloading new data.
In case that trial period is used but fw version is still 1.48 or older, please request trial reset in "Account recovery" section.
Box S/N and "Trial reset" required.. -
andrew713.
User deleted
RIFF Box v1/v2 updates, 04.06.2018 40 new models
RIFF Box updates, 04.06.2018
ZTE Blade A610
HTC Models boot repair, ISP pinout, Read/Write eMMC:
HTC Desire 516
HTC Desire D728w (2PQ81000)
Samsung Models boot repair, ISP pinout, Read/Write eMMC:
Samsung T567V
Samsung T555
Samsung T535
Samsung T377P
Samsung T337T
Samsung T331
Samsung T311
Samsung T310
Samsung T285YD
Samsung T285
Samsung T210
Samsung SCL23
Samsung SCL21
Samsung S7275Y
Samsung P5200
Samsung N7105
Samsung P5210
Samsung P605
Samsung P555
Samsung N9005
Samsung N7108
Samsung N900J
Samsung J7008
Samsung J3110
Samsung J710FN
Samsung J700F
Samsung J700
Samsung J321AZ
Samsung J320P
Samsung J320F
Samsung J320AZ
Samsung J320A
Samsung J200M
Samsung J120AZ
Samsung J120A
Samsung J111M
Samsung J106H
Nokia Models boot repair, ISP pinout, Read/Write eMMC:
Nokia Lumia 610 (RM-835)
Nokia X2 (RM-1013)
To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:
Index of ../../RIFF/RIFF_ROOT/
RIFF Box v1 (Black box) users who havent used 15 days trial can activate it after installing JTAG Manager v1.78 and downloading new data.
In case that trial period is used but fw version is still 1.48 or older, please request trial reset in "Account recovery" section.
Box S/N and "Trial reset" required.. -
andrew713.
User deleted
How to get license for RIFF Box v1 JTAG functions for free
I see that some users don't understand how can they obtain license files, to use RIFF Box v1 for JTAG functions.
Since new licensing scheme was introduced we had regular free periods during which users could obtain license and use it without limits until disk format or accidental erasure.
All RIFF Box v1 expired accounts received 15 days trial. If You haven't used trial period, skip to license download instructions:
To obtain RIFF Box v1 JTAG license for free, please do this:
1. Register account at Unlock Forum (if already not registered)
2. Join "RIFF Box users" group
3. Go to Support Tickets-> Account Recovery section and click Submit new thread.
4. Provide box SN in message and "Trial Reset" in subject
5. When request is solved, Your thread will be moved to "Solved" subsection.
---
Now You have 15 days free trial, during which You can use full functionality of RIFF Box (both JTAG and eMMC). You should download all DLL files You may need too.
To enable JTAG functions, do this:
1. Start JTAG Manager v1.78 and download required license files and any other file You need. Update firmware to v1.49 if requested.
2. Select "Custom JTAG Target Settings" in upper right drop down menu
3. Switch to JTAG Read/Write TAB and click "Connect & Get ID"
4. Download license
Now, You can use RIFF Box v1 JTAG functions as long as there is no changes in DLL-s or RepairPacks directory.. -
andrew713.
User deleted
RIFF Box v1/v2 updates - 34 new models, v1.79 JTAG Manager and v1.50 Firmware
RIFF Box v1/v2 updates, date 11.06.2018:
RIFF Box Firmware v1.50 RIFF JTAG Manager v1.79
RIFF Box eMMC plugin FS Explorer v4.10
RIFF Box repair DLL-s (34 new list).