Procesos Exitosos Infinity Box

chileunlock

Posted on 3/9/2011, 00:56

.

User deleted

.

chileunlock

Posted on 3/9/2011, 22:55

.

User deleted

.

ITALF1

Posted on 5/9/2011, 21:46

.

User deleted

unlock 5760..

5760-2c90af5

.

..::Virtualcel::..

Posted on 6/9/2011, 18:04

.

User deleted

Unlock BenQ-Siemens C71A

COM5 [VCP1] selected
module v1.33
Device: BenQ C71A
Checking data, wait...
Action: unlock
Boot...
Phone should be Switched OFF !
Connect test-point to Ground !
Press Power button now !
Connecting...
Disconnect test-point !
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
Check Flash Done
Check Parameters...
Flash: 0089:885500010001
file saved: C:\InfinityBox\BModule\eeprom-00_20110906-115719.3AF.bin
Check Parameters Done
Check Space...
Flash: 0089:885500010001
flash: Intel 28F640W30-B B 8Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Flash: 0089:885500010001
Writing Done
Finished, time used: 200 sec
Remove/Install battery now !

.

jesedavidfrv

Posted on 30/9/2011, 16:22

.

User deleted

UNLOCK ZTE S215 + MOVIL PANAMA READ CODES USANDO ZTE S213 NO PROBE SMART FAST PERO DEBE SALIR

CODE

COM7 [VCP0] selected
modulo v4.01
Action: read unlock codes
Metodo unlock: read codes
Modelo: ZTE-S213
Checkeando datos, espere...
El Telefono deberia estar APAGADO !
Mantenga Presionado el boton Power !
19200 autodetect
Iniciando [6223:8A05:8A00]...
CPU: MT6223
alta velocidad de boot On
chip: 0011:503C:000C
status: FF
Connecting at 19200, wait...
Deje de presionar el boton power ahora !
Telefono detectado, espere...
Hardware: MT6223,E05
Dato: 2000.00.00
Version: 1.0
Version: SE-PAN-CW8S-P109A19V1.0.0B01
Version: ZTENJ23D_09A_HW
====================
New firmware found (v.4.01, database date: 19.08.2011):
SE-PAN-CW8S-P109A19V1.0.0B01

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Leer full flash" operation
- send flash backup files to support: support@infinity-box.biz or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
86 byte(s) read
imei: 86429900320391
coneccion Ok
192 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 0000
180 byte(s) read
Leyendo datos...
972 byte(s) read
lock[1] code: + 293357801599
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finalizado, tiempo usado: 13 sec
Quite/coloque la bateria ahora !

.

distriaccel

Posted on 22/11/2011, 00:17

.

User deleted

un muertico revivido
huawei g7206

.

josedavido

Posted on 24/11/2011, 23:43

.

User deleted

Unlock ZTE X630

vendo-celular-teclado-qwerty-zte-x630-aprovechen-1307385933

Escoger el modelo ZTE X632
Cable LG GS107

.

cliniccel

Posted on 25/11/2011, 02:12

.

User deleted

QUOTE (distriaccel @ 22/11/2011, 00:17)

un muertico revivido
huawei g7206

amigo que cable selecciono para el proceso , gracias por su respuesta.

.

GPS

Posted on 6/12/2011, 21:49

.

User deleted

Huawei G3510 de Claro Nicaragua, liberado via lectura de códigos.

COM4 [VCP0] selected
module v4.12
Action: read unlock codes
unlock method: read codes
Model: Huawei-G3510_16m
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:4D78:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E08
Date: 2000.00.00
Version: 1.0
Version: G3510_V100R001B101C133SP06S
Version: L80_HW
====================
New firmware found (v.4.12, database date: 28.11.2011):
G3510_V100R001B101C133SP06S

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
80 byte(s) read
imei: xxxxxxxxxxxxxxx
connection Ok
185 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
173 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 13611624
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 15 sec
Remove/Install battery now !

.

GPS

Posted on 12/12/2011, 18:28

.

User deleted

Huawei G7010 de Claro Nicaragua, desbloqueado sin ningún error. El cable RJ45 a usar es C3300K de Z3x.

COM4 [VCP0] selected
module v4.12
Model: Huawei-G7010
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6253:8A02:8A00]...
CPU: MT6253
high speed boot On
chip: 0000:0000:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6253,E02
Date: 2000.00.00
Version: 1.0
Version: NICC64B263SSCBDD
Version: VER.C
====================
New firmware found (v.4.12, database date: 28.11.2011):
NICC64B263SSCBDD

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
115 byte(s) read
imei: xxxxxxxxxxxxxxx
Finished, time used: 13 sec
Remove/Install battery now !
Now click to "OK" button and press and HOLD phone "Power" button again !
interface: META_DLL_v6.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
done
Release Power button now !
Shutdown...
done
Finished, time used: 6 sec
Remove/Install battery now !

.

josedavido

Posted on 26/12/2011, 17:02

.

User deleted

Unlock Huawei G7007 100% working

Cable S210.

Br,
Josedavido

.

GPS

Posted on 23/2/2012, 17:29

.

User deleted

PCD CL1135CPR de Claro Panamá.

==== [23/2/2012 09:58:39 a.m.] ====
COM4 [VCP0] selected
module v4.19
Action: read unlock codes
unlock method: read codes
Model: PCD-CL1135
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:55BE:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E08
Date: 2000.00.00
Version: 1.0
Version: C1020_01.32_61010A_71403_EON_001
Version: CELLONSZ23C_09A_GEMINI_HW
86 byte(s) read
imei: 86xxxxxxxxxxxxx
connection Ok
193 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
181 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 97264228
lock[2] code: +
lock[3] code: + default
lock[4] code: -
lock[5] code: -
lock[6] code: +
lock[7] code: +
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 37 sec
Remove/Install battery now !

.

GSM-230787

Posted on 7/6/2012, 19:13

.

User deleted

Reparacion de SERIE SEFTONE S-8000

gracias al master TITO

.

Gokuu2008

Posted on 27/8/2012, 21:55

.

User deleted

huawei g6600

COM10 [VCP0] selected
modulo v4.12
Action: "sp-unlock"
Metodo unlock: smart fast
Modelo: Huawei-G6600_64mb
Checkeando datos, espere...
El Telefono deberia estar APAGADO !
Mantenga Presionado el boton Power !
19200 autodetect
Iniciando [6235:8A04:8A01]...
CPU: MT6235
alta velocidad de boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Deje de presionar el boton power ahora !
Telefono detectado, espere...
Hardware: MT6235,E04
Dato: 2000.00.00
Version: 1.0
Version: E5.2CQ01V01.08
Version: BYD35_09A_PMWY_HW
82 byte(s) read
imei: 35751003151320
coneccion Ok
189 byte(s) read
Leyendo datos...
construcción de nuevos datos..
escribiendo datos...
177 byte(s) read
Leyendo datos...
reading data #2...
972 byte(s) read
construcción de nuevos datos..
escribiendo datos...
verifying...
verificacion Ok
Listo
Finalizado, tiempo usado: 21 sec
Quite/coloque la bateria ahora !

Edited by Gokuu2008 - 10/11/2012, 23:54

.

Gokuu2008

Posted on 10/11/2012, 23:53

.

User deleted

i766 zte

==== [10/11/2012 17:48:04] ====
COM39 [VCP0] selected
module v4.13
Action: "sp-unlock"
unlock method: smart fast
Model: ZTE-i766
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C303:000A
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: I766_V2_Z1_S_A0FA108
Version: ZTEMT25_07A_HW_A
44 byte(s) read
imei: 35796301061030
connection Ok
157 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
145 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 12 sec
Remove/Install battery now !

.