-
.::Braycel::.
.User deleted
COM9 [VCP0] selected
module v4.13
Model: Huawei-G7007
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
high speed boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: ENGC27B162
Version: VER.B
80 byte(s) read
imei: 86334900012364
Finished, time used: 10 sec
Remove/Install battery now !
Now click to "OK" button and press and HOLD phone "Power" button again !
interface: META_DLL_v6.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
done
Release Power button now !
Shutdown...
done
Finished, time used: 9 sec
Remove/Install battery now !
. -
Gokuu2008 .
User deleted
g3510 done
COM10 [VCP0] selected
módulo v4.13
Action: read unlock codes
Metodo unlock: leer códigos
Modelo: Huawei-G3510_16m
Checkeando datos, espere...
El Teléfono debería estar APAGADO !
Mantenga Presionado el boton Power !
19200 autodetect
Iniciando [6223:8A05:8A00]...
CPU: MT6223
alta velocidad de boot On
chip: 0011:4559:000C
status: FF
Connecting at 19200, wait...
Deje de presionar el boton de ENCENDIDO (Power) ahora !
Teléfono detectado, espere...
Hardware: MT6223,E05
Dato: 2000.00.00
Versión: 1.0
Versión: G3510_V100R001B101C39SP10S
Versión: L80_HW
====================
New firmware found (v.4.13, database date: 29.01.2012):
G3510_V100R001B101C39SP10S
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Leer full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
80 byte(s) read
imei: 35398404180571
conexión Ok
185 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
173 byte(s) read
Leyendo datos...
972 byte(s) read
lock[1] code: + 68668075
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finalizado, tiempo usado: 13 sec
Quite/coloque la batería ahora !
. -
Gokuu2008 .
User deleted
COM10 [VCP0] selected
módulo v4.13
Servicio: _Autodetect MT6205-6239 NOR
Checkeando datos, espere...
Habilitada la detección avanzada del chip
Action: "repair imei"
Método de escritura de imei: modo-3
Canal de escritura de imei: imei #2 para dual sim/mono CPU
Nuevo imei: 353100092671883
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Mantenga Presionado el boton Power !
19200 fixed
Conectando, espere...
Iniciando [6225:8A05:8A00]...
CPU: MT6225
alta velocidad de boot On
chip: 0001:BE03:0009
status: FF
Tamaño del boot packet: 0400
Deje de presionar el boton de ENCENDIDO (Power) ahora !
Boot Done
====> Iniciar ...
detecting chip #00 in region #00...
Flash EC257E25082501:18E59F00000000
Flash Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #01 in region #00...
Flash EC257E25082501:18E59F00000000
Flash Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #02 in region #00...
Flash EC257E25082501:18E59F00000000
Flash Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #03 in region #00...
Flash EC257E25082501:18E59F00000000
Flash Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
número de flash chip/regiones detectadas: 04/01
Iniciar Done
====> Seleccionar velocidad ...
921600
Seleccionar velocidad Done
====> Iniciar bootcode ...
Iniciar bootcode Done
====> Comprobar la integridad del firmware ...
device parameters detection in progress...
detecting chip #00 in region #00...
Flash EC257E25082501:18E59F00000000
Flash Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #01 in region #00...
Flash EC257E25082501:18E59F00000000
Flash Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
número de flash chip/regiones detectadas: 01/01
Tamaño total de la región flasheada: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (04)
TCL-ID is absent
rom info detection finished
rom info ver: 04
sw version: E806_PH1F8_EVCOM_MT6225S00.01_1_20090116.BIN
project-id: E806_PH1F8.01.1, 00000000
code offset: 00000000
ffs offset/size [01]: 01C00000/00400000
rom info structure: [standard] type (04)
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset assigned: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
firmware area: 00000000-00DFFFFF
detectando startup code area #2...
................................................................................................................................................................................................................................................................
startup code area #2 is absent
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Comprobar la integridad del firmware Done
====> Comprobar el contenido del firmware ...
Comprobar el contenido del firmware Done
====> Backup de datos requeridos ...
leyendo E806_PH1F8_EVCOM_MT6225S00.01_1_20090116__ffs...
Archivo guardado: F:\Program Files (x86)\InfinityBox\MModule\E806_PH1F8_EVCOM_MT6225S00.01_1_20090116__ffs_20130916-165108.B0E.bin
Flash EC257E25082501:18E59F00000000
Backup de datos requeridos Done
====> Revisión de datos requeridos ...
2 step(s) required
Revisión de datos requeridos Done
====> Operación Especial ...
Operación Especial Done
====> Escribir ...
Flash EC257E25082501:18E59F00000000
Escribir ffs
Escribir Done
====> Finalizado ...
Finalizado Done
Finalizado, tiempo usado: 3 min 40 sec
Quite/coloque la batería ahora !
. -
Gokuu2008 .
User deleted
n97 done
COM26 [VCP0] selected
module v4.13
Device: _Autodetect MT6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: "repair imei"
imei write channel: imei #1 (default imei inside firmware)
new imei: 358202053012886
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:6703:000A
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #02 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #03 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (07)
TCL-ID is absent
rom info detection finished
rom info ver: 07
sw version: AAA25_09A1A_PCB01_GPRS_MT6225_S00.MAUI_09A_W09_24_MP_V3.BIN
project-id: MAUI.09A.W09.24.MP.V3, 00000000
code offset: 00000000
ffs offset/size [01]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
firmware area: 00000000-00DFFFFF
detecting startup code area #2...
................................................................................................................................................................................................................................................................
startup code area #2 is absent
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: EC257E25082501:2AEA0000000000
Backup required data Done
====> Patch required data ...
detecting ffs/eeprom structure pass 2...
..........................
ffs/eeprom: detect std location pass #1...
.......................
ffs/eeprom: detect standard offset pass #1...
ffs/eeprom: detect std location pass #2...
.................................
ffs/eeprom: detect ext location pass #2...
.............................
ffs/eeprom: detect standard offset pass #2...
ffs/eeprom record offset detected
ffs/eeprom: detect standard data...
ffs/eeprom record size detected
ffs/eeprom layout detection complete
ffs/eeprom detected ok element #2
imei default found: 12349024681122
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
flash: EC257E25082501:2AEA0000000000
flash: EC257E25082501:2AEA0000000000
Write: imei
Write Done
====> Finalization ...
ffs formatting...
flash: EC257E25082501:2AEA0000000000
Finalization Done
Finished, time used: 2 min 21 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !. -
.
Format FS Lanix LX7
. -
.
unlock zte s315+
COM8 [VCP0] selected
módulo v1.78
Servicio: ZTE-S315+
Checkeando datos, espere...
Action: "sp-unlock"
unlock method-1
Boot ...
Mantenga Presionado el boton Power !
e-gold: 820000
loading...
next part...
boot answer: 01
Deje de presionar el boton de ENCENDIDO (Power) ahora !
Boot Done
Seleccionar velocidad ...
115200
Seleccionar velocidad Done
Connecting ...
Flash 00EC:257E
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
sw version: CEL-P108A27FM U V1.0.0B03 Sep 15 2009 15 57 13 COMCEL-P108A27FM
Check parameters Done
backup critical area ...
leyendo eeprom-static...
Archivo guardado: F:\UNLOCK\BOX\INFINITY\INSTALADO\Pana01\ZTE-S315+_eeprom-static_20150429-154534.B1E.bin
loading data...
data loaded
leyendo eeprom-security...
Archivo guardado: F:\UNLOCK\BOX\INFINITY\INSTALADO\Pana01\ZTE-S315+_eeprom-security_20150429-154535.B1E.bin
leyendo eeprom-complete...
Archivo guardado: F:\UNLOCK\BOX\INFINITY\INSTALADO\Pana01\ZTE-S315+_eeprom-complete_20150429-154541.B1E.bin
reading additional data...
Archivo guardado: F:\UNLOCK\BOX\INFINITY\INSTALADO\Pana01\ZTE-S315+_lock-area_20150429-154554.B1E.bin
backup critical area Done
Check memory ...
seguro encontrado
lock type #1 found
Check memory Done
Escribir ...
Erasing: lock-area
Writing: lock-area
Escribir Done
Finalizado, tiempo usado: 1 min 1 sec
Quite/coloque la batería ahora !. -
.
Chinese Miracle II [RKT Module] v 1.0 full reset
Connect device to PC!
Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!
Found active FlashInterface , connecting ...
Detected : RK2929
Read Info Ok!
Operation : ReadInfo [ v1.0 ]
======= Flash Info :
Channel : 0x00
FlashType : 2C68044AA9
FlashSize : 0x0000000100000000
FlashCaps : 1048576/4096/42/24/4
======= Device Info :
CPU : ROCKCHIP
Android : v4.0.3
Project : eng.dong.20120524.203245
Name : rk29sdk
Brand : KALLEY
Device : rk29sdk
Model : K-BOOK
Read Info Ok!
Elapsed: 00:00:05
Format FS/Reset Settings accepted by User!
Operation : FormatFS / ResetSettings [ v1.0 ]
Init UserData
Init Cache
Init IntSD
Init Ok! Format prepare Done!
Wait, until device reboot
Elapsed: 00:00:00. -
andrew713 .
User deleted
frp alcatel 5056a
Operation : Reset Settings [ v1.11 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 09236D95
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 12D28876E14D7A755207C9D61168E8E0
ID_BLOCK_L : FE953B92870EB035C82768A1A3425C7F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!
Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!
Remove FRP
Reset Ok!
Done!
Elapsed: 00:00:13
Reconnect Power/Cable!
read flash alcatel 5056a
Operation : Read Flash [ v1.11 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 09236D95
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 12D28876E14D7A755207C9D61168E8E0
ID_BLOCK_L : FE953B92870EB035C82768A1A3425C7F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!
Brand : TCL
ProdName : 5056A
ProdModel : 5056A
Device : POP455C
AndroidVer: 6.0.1
Manufact. : TCL
QLMxCPU : MSM8909
DevInfo : MSM8909__TCL__TCL__ANDR_v6.0.1__5056A__POP455C__5056A
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : boot.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : splash.img
[Read Ok] : secro.img
[Read Ok] : misc.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : tctperso.img
[Read Ok] : system.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 2284 MiB
Done!
Elapsed: 00:04:53
Reconnect Power/Cable!. -
andrew713 .
User deleted
Operation : Reset Privacy Lock [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 700100454838454134010CB7BD638369
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 4AE8H
[eMMC] : FLASH_CID : 700100454838454134010CB7BD638369
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID : 0xF1AA0C903048AABF4917E7D92D5939E9
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Checking data ...
Process block #1
Process block #2
Privacy Lock reset Ok!
Done!
Elapsed: 00:00:38
Reconnect Power/Cable!.
Procesos Exitosos Infinity Box |
