-
roniscell.
User deleted
Sale como Zte-X930
Smart Fast. -
GSM-230787.
User deleted
eso estaba postiado en un foro xxxx , pilas por que despues van a decir que la info se esta trayendo de alla para aca
pero de quien es la autoria???
deberian postear los creditos de esa solucion. -
karurosu316.
User deleted
Aca otro....
COM11 [VCP0] selected
modulo v3.96
Action: "sp-unlock"
Metodo unlock: smart fast
Modelo: ZTE-X930
Checkeando datos, espere...
El Telefono deberia estar APAGADO !
Mantenga Presionado el boton Power !
19200 autodetect
Iniciando [6235:8A04:8A01]...
CPU: MT6235
alta velocidad de boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Deje de presionar el boton power ahora !
Telefono detectado, espere...
Hardware: MT6235,E04
Dato: 2000.00.00
Version: 1.0
Version: X930_V1_Z6_VE_ESPT_A1EF104
Version: MB3508AV1BMB_BV1.0
====================
New firmware found (v.3.96, database date: 21.06.2011):
X930_V1_Z6_VE_ESPT_A1EF104
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Leer full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
115 byte(s) read
imei: 3555920
coneccion Ok
216 byte(s) read
Leyendo datos...
reading data #2...
construcción de nuevos datos..
escribiendo datos...
204 byte(s) read
Leyendo datos...
264 byte(s) read
construcción de nuevos datos..
escribiendo datos...
verifying...
verificacion Ok
Listo
Finalizado, tiempo usado: 17 sec
Quite/coloque la bateria ahora !. -
..::Virtualcel::...
User deleted
eso estaba postiado en un foro xxxx , pilas por que despues van a decir que la info se esta trayendo de alla para aca
Si esta alla que este aca esta firmada por el señor autor. -
ncoolsoft.
User deleted
Este post es informativo Y el autor tiene su imagen firmada.
Tema Cerrado para evitar polemicas. -
el parse.
User deleted
buenos señores acá les traigo para los que aun no han podido con este modelo
COM9 [ProlificSerial2] selected
modulo v3.98
Action: read unlock codes
Metodo unlock: read codes
Modelo: Huawei-G7600
Checkeando datos, espere...
El Telefono deberia estar APAGADO !
Mantenga Presionado el boton Power !
19200 autodetect
Iniciando [6225:8A05:8A00]...
CPU: MT6225
alta velocidad de boot On
chip: 0001:CD03:0009
status: FF
Connecting at 19200, wait...
Deje de presionar el boton power ahora !
Telefono detectado, espere...
Hardware: MT6225,E05
Dato: 2006.06.14
Version: 1.0
Version: G7600CA.P63.M21.00.12
Version: CKT25_GEMINI_HW
67 byte(s) read
imei: 8631940002*****
coneccion Ok
178 byte(s) read
166 byte(s) read
Phone lock: Off
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 1234
166 byte(s) read
Leyendo datos...
972 byte(s) read
lock[1] code: + 17082724
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finalizado, tiempo usado: 11 sec
Quite/coloque la bateria ahora !
creo que el log de operaciones dice todo
igual explico algo breve
con infinity mmodule v3.98
seleccionamos modelo g7600 read codes y encendemos el equipo con simcard de otro operador ingresamos el código que nos da el programa y listo bandas abiertas
espero que les sea de ayuda
gracias
. -
Gokuu2008.
User deleted
gracias por su testeo. . -
thefurious.
User deleted
Gracias por la info +++++++++++. . -
el parse.
User deleted
para eso estamos . -
cerja.
User deleted
unlock G6600 echo con infinity
COM9 [VCP0] seleccionado
módulo v3.93
Acción: "sp-desbloqueo"
método de desbloqueo: inteligente rápido
Modelo: Huawei-G6600
comprobación de los datos, espere ...
teléfono debe estar APAGADO!
Presionado el boton Power!
19200 autodetectar
Inicializando [ 6235:8 A04: 8A01] ...
CPU: MT6235
de arranque de alta velocidad en
chip: 0000:0000:0003
status: FF
rom: 4D573031
Conexión a 19200, espera ...
Suelte el botón Power!
Teléfono detectado, espere ...
Hardware : MT6235, E04
Fecha: 2000.00.00
Version: 1.0
Versión: E5.2PT01V01.04
Versión: BYD35_09A_PMWY_HW
82 byte (s) read
imei:
conexión Ok
189 byte (s) lee
los datos de lectura ...
la lectura de datos # 2 ...
construcción de nuevos datos ...
la escritura de datos ...
177 byte (s) leer
la lectura de datos ...
972 byte (s) read
construcción de nuevos datos ...
la escritura de datos ...
... la verificación de
la verificación Ok
hecho
Finalizado, tiempo usado : 15 sec
Quite / coloque la bateria ahora!
. -
AntrhaX3Gs.
User deleted
Log Operaciones con UTSTARCOM GPFE128TG
con Infinity - Box
Escoger el modelo UTStarcom-GPFE128en
Action: read/check information
Model: UTStarcom-GPFE128en
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6223, E05
Hardware version: CELLONSZ23C_07B_HW
Software version: C2133_1.24_US_CLARO_
Software date: 2000.00.00
Barcode: MT012345678901234567
imei-1: 356189029014348
Finished, time used: 3 sec
Remove/Install battery now !
COM7 [VCP0] selected
module v3.75
Device: UTStarcom-GPFE128en
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:9291:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:29EA0000000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [protected] type (04), 1 record(s)
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\Infinity Box\MModule\backup_security\id.B3FEF6D2.[CELLONSZ23C_07B_PCB01_GPRS_MT6223P_S00.C2133_1_24_US_CLARO_CA_SAMG_HY.BIN_952B7FFD].rpl
rom info detection finished
device-id: B3FEF6D2
rom info ver: 04
sw version: CELLONSZ23C_07B_PCB01_GPRS_MT6223P_S00.C2133_1_24_US_CLARO_CA_SAMG_HY.BIN
project-id: C2133_1.24_US_CLARO_CA_SAMG_HY, FD7F2B95
code offset: 00000000
ffs offset/size [01]: 00900000/00700000
rom info structure: [protected] type (04), 1 record(s)
TCL-ID is absent
ffs/eeprom address assigned: 00900000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
detecting firmware version...
firmware version: CELLONSZ23C_07B_PCB01_GPRS_MT6223P_S00.C2133_1_24_US_CLARO_CA_SAMG
detecting firmware build...
...............................
firmware date/time: 2009-11-25 14-49
hw1: CELLONSZ23C_07B_HW
hw2: 0D_CELLONSZ23C_07B
done
detecting product-id...
................................................................
done
detecting languages...
............................
language parameters detected
detected languages: En Es
file saved: C:\Archivos de programa\Infinity Box\MModule\backup_security\UTStarcom-GPFE128en_CELLONSZ23C_07B_PCB01_GPRS_MT6223P_S00.C2133_1_24_US_CLARO_CA_SAMG__system_log_B3FEF6D2_952B7FFD_20110803-122029.B0X.bin
Finished, time used: 1 min 15 sec
Remove/Install battery now !
COM7 [VCP0] selected
module v3.75
Action: "user code"
unlock method: smart fast
Model: UTStarcom-GPFE128en
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:9291:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: C2133_1.24_US_CLARO_CA_SAMG_HY
Version: CELLONSZ23C_07B_HW
67 byte(s) read
imei: 35618902885775
connection Ok
178 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
user code set to: 0000
Finished, time used: 14 sec
Remove/Install battery now !
COM7 [VCP0] selected
module v3.75
Action: reset settings ("format ffs")
Model: UTStarcom-GPFE128en
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:9291:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: C2133_1.24_US_CLARO_CA_SAMG_HY
Version: CELLONSZ23C_07B_HW
67 byte(s) read
imei: 35618902885775
connection Ok
building list...
done
items to clear: 176
warning: wrong packet cs
items cleared: 176 of 176
building list...
done
items remains: 0
Finished, time used: 34 sec
Remove/Install battery now !
COM7 [VCP0] selected
module v3.75
Action: "sp-unlock"
unlock method: smart fast
Model: UTStarcom-GPFE128en
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:9291:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: C2133_1.24_US_CLARO_CA_SAMG_HY
Version: CELLONSZ23C_07B_HW
67 byte(s) read
imei: 35618902885775
connection Ok
178 byte(s) read
reading data...
building new data...
writing data...
166 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 14 sec
Remove/Install battery now !
Action: "repair xmxx"
Model: UTStarcom-GPFE128en
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: 356189029014348
imei write method: mode-1
new imei-1: 356189029014348
verification Ok
Finished, time used: 3 sec
Remove/Install battery now !. -
Gokuu2008.
User deleted
aqui . -
..::Virtualcel::...
User deleted
COM5 [VCP0] selected
module v1.78
Device: ZTE-S315+
Checking data, wait...
Action: "sp-unlock"
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820000
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 00EC:257E
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
sw version: CEL-P108A27FM U V1.0.0B03 Sep 15 2009 15 57 13 COMCEL-P108A27FM
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: c:\InfinityBox\Pana01\ZTE-S315+_eeprom-static_20110824-103821.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: c:\InfinityBox\Pana01\ZTE-S315+_eeprom-security_20110824-103822.B1E.bin
reading eeprom-complete...
file saved: c:\InfinityBox\Pana01\ZTE-S315+_eeprom-complete_20110824-103823.B1E.bin
reading additional data...
file saved: c:\InfinityBox\Pana01\ZTE-S315+_lock-area_20110824-103826.B1E.bin
backup critical area Done
Check memory ...
lock found
lock type #1 found
Check memory Done
Write ...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, time used: 23 sec
Remove/Install battery now !
Br,
Virtualcel. -
.::nannocell12::..
User deleted
COM5 [VCP0] selected
module v1.78
Device: ZTE-S315+
Checking data, wait...
Action: "sp-unlock"
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820000
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 00EC:257E
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
sw version: CEL-P108A27FM U V1.0.0B03 Sep 15 2009 15 57 13 COMCEL-P108A27FM
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: c:\InfinityBox\Pana01\ZTE-S315+_eeprom-static_20110825-155520.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: c:\InfinityBox\Pana01\ZTE-S315+_eeprom-security_20110825-155521.B1E.bin
reading eeprom-complete...
file saved: c:\InfinityBox\Pana01\ZTE-S315+_eeprom-complete_20110825-155522.B1E.bin
reading additional data...
file saved: c:\InfinityBox\Pana01\ZTE-S315+_lock-area_20110825-155525.B1E.bin
backup critical area Done
Check memory ...
lock found
lock type #1 found
Check memory Done
Write ...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, time used: 29 sec
Remove/Install battery now !. -
chileunlock.
User deleted
.