-
.:: Saulcell ::..
User deleted
Unlock Done Huawei U8665 Fusion2 QUOTEKilling adb server
Found Device:8853D4FF2518
Device Rooted.
Dumping data, please wait...
Simlock:Locked
Unlocking Please wait while...
Accepted ok..
Done, preparing to restart phone..
Restarting phone..
. -
.:: Saulcell ::..
User deleted
Unlock Huawei U8651T Done QUOTENow connect phone to PC
Injecting Loader.
Loader injected ok.
Read Phone Info..
Phone Imei : 8603xxxxxxxxxxx
Phone SN : G9E7ND12A1907685
Phone Firmware : U8651TV100R001C00B009_EF
SimLock marker found..
Total markers found : 1
Simlock Status : Locked.
Removing SimLocks Please Wait...
Read marker : 1
Write marker : 1
All Done.. -
.:: Saulcell ::..
User deleted
Unlock bess VZ219 Done
. -
Gokuu2008.
User deleted
BaseBand CPU :MT6575_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: NAND: (4Gb+2048Mb) [TOSHIBA] TYBC0A111557KC size:0x0020000000
----------------------------------------------------
Detected partitions count: 18
Start format phone.
FORMAT NAND FLASH : BEGIN:0x11980000 - LEN:0xd200000
Format Range: 0X11980000 ~ 0X1EB7FFFF
Format Size: 1.64Gb
Bad Blocks: 0
Error Blocks: 52
Total Blocks: 840
Bad/Error Block Ratio: (6.190%)
Send preloader...
Download firmware to flash now...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
All done.
. -
jonson86.
User deleted
D140T CODICEFlash files count is :9
[color=red] Action : Firmware update.
Selected Blu: D536
Exe version: NCKDongle AndroidMTK 2.5.5.4
Scenario: Safe Flash[/color]
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : BLU Phone USB Port (COM53)
Phone detected...Please wait
Sending DA agent, please wait...
[color=red]BaseBand CPU :MT6571_S00
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------[/color]
NAND: (4Gb+2048Mb) [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
BOOT STYLE : NAND BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : DA USB VCOM Port (COM21)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash NAND Algo Start.
Download firmware to flash now...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.. -
.
HUAWEI Y530
Checking firmware UPDATE.APP, wait.
Using algo for HW8x12
Port: Android Adapter PCUI (COM196)
MD5RSA: $FE000000 SIZE: $ 80 Blocks: $ 0
CRC: $FF000000 SIZE: $1437C Blocks: $ 14
OEMSBL_VERLIST: $E8000000 SIZE: $ 296 Blocks: $ 0
AMSS_VERLIST: $EA000000 SIZE: $ 22D Blocks: $ 0
GPT: $D2000000 SIZE: $8600 Blocks: $ 8
RPM: $C2000000 SIZE: $23E2C Blocks: $ 23
TZ: $C3000000 SIZE: $50AEC Blocks: $ 50
SBL1: $C6000000 SIZE: $485AC Blocks: $ 48
MODEM: $C1000000 SIZE: $232E600 Blocks: $232E
SDI: $C9000000 SIZE: $48C4 Blocks: $ 4
OEMSBL_VER: $E9000000 SIZE: $ 1E Blocks: $ 0
AMSS_VER: $EC000000 SIZE: $ 19 Blocks: $ 0
MODEMST1: $EE000000 SIZE: $400000 Blocks: $ 400
MODEMST2: $EF000000 SIZE: $400000 Blocks: $ 400
After flash phone can start in recovery mode.
If this happen, wipe phone[FACTORY RESET].
Done..