-
l&h.
User deleted
Buenos días amigos, acudo para solicitarles ayuda a ustedes que tienen experiencia y son muy profesionales en dar soluciones a los problemas que se presentan en la telefonía celular. El problema que tengo con este modelo es el siguiente: El teléfono presentaba errores en el modulo de los mensajes (enviar mensajes, configuración de mensajes), entonces prodedi a realizarle trabajos con el modulo Chinese Miracle II [RDA module] v 0.06, le hice read fullflash (supuestamente, porque cuando busque el archivo, pesaba 12 KB), read user code y Format File System, y después del format ya no me encendió. Si alguien tiene un backup de este modelo, por favor facilitemela.
[IMG][/IMG]
Card found: S/N
Chinese Miracle II [RDA module] v 0.06
Start at : [25/05/2014 / 10:37:30 a.m.]
Operation : Check Device / Info
======= Settings
Settings : Read AllInfo is Off
Settings : Full Boot disabled by default
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4005
CPU_CN : RDA Mirco CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
Elapsed: 00:00:07
Done
Reconnect Power/Cable!
Finish at : [25/05/2014 / 10:37:38 a.m.]
Start at : [25/05/2014 / 10:37:45 a.m.]
Operation : Read FullFlash
======= Settings
Settings : SafeMode is Off [Fast]
Settings : Make IFF (MCU) file
Settings : Make Calibration file
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4005
CPU_CN : RDA Mirco CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
Read Flash now ...
Read Ok, 12288 bytes read
Verify file...
Con't collect Project Info , saving as default
Saved as : 88094005_00400000.bin
Done
Elapsed: 00:00:05
Finish at : [25/05/2014 / 10:37:51 a.m.]
Reconnect Power/Cable!
Start at : [25/05/2014 / 10:38:03 a.m.]
Operation : Read User Code
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4005
CPU_CN : RDA Mirco CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
Read UDA now , wait ...
Read done, sorting EXTData
Following items found :
Item : NVRAM
Required data found, extracting code
UserCode : 1234
Elapsed: 00:00:15
Done
Reconnect Power/Cable!
Finish at : [25/05/2014 / 10:38:20 a.m.]
Start at : [25/05/2014 / 10:38:24 a.m.]
Operation : Format File System
Settings : SmartFormat is On
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4005
CPU_CN : RDA Mirco CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
NVMFAT Area : 0x003A0000 , Len : 0x0005C000
Range as Factory Defined
Format User Area ...
CSD WR : 81C05C48 , 81C05C5C
CSD DR : A2000000 , A2008000 , A2010000
CSD MB : 00008000
Format Done
Elapsed: 00:01:08
Reconnect Power/Cable!. -
l&h.
User deleted
Necesito su ayuda urgente. Por favor... .