-
Gokuu2008.
User deleted
i8190l done
Bienvenido en Octoplus/Octopus Box Samsung software versión 1.5.0
-----------------------------------------------------------------------------------
To connect GT-I8190L phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "Modem" value.
7. Set "USB" radio button to "PDA" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM31
Modelo seleccionado: GT-I8190L
Puerto ocupado
Searching for a phone. Please wait...
Phone found.
Fecha de creación del firmware: Fri Feb 8 13:19:13 KST 2013
PDA version: I8190LUBAMB1
CSC version: I8190LTFGAMB1
Versión del SW: I8190LUBAMB1
IMEI del teléfono: 358854056030263
Phone SN: R21DA1WYXHX
Android version: 4.1.2 (JZO54K)
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM31
Modelo seleccionado: GT-I8190L
Puerto ocupado
Searching for a phone. Please wait...
Phone found.
Fecha de creación del firmware: Fri Feb 8 13:19:13 KST 2013
PDA version: I8190LUBAMB1
CSC version: I8190LTFGAMB1
Versión del SW: I8190LUBAMB1
IMEI del teléfono: 358854056030263
Phone SN: R21DA1WYXHX
Android version: 4.1.2 (JZO54K)
Liberando el teléfono...
Reading data from phone...
Data read successfully.
Please conect phone to BOX via UART cable.
Searching for a phone. Please wait...
Phone found.
Unlocking phone. This can take some time. Please wait...
Please insert card into phone, if phone is locked, then type 00000000
El teléfono ha sido liberado con éxito
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM31
Modelo seleccionado: GT-I8190L
Puerto ocupado
Searching for a phone. Please wait...
¡En el puerto seleccionado el teléfono no fue detectado!
Intentando a buscar el puerto USB diagnóstico...
Intentando a conectar el teléfono en COM82
La conexión con el teléfono falló
¡Puertos diagnósticos no encontrados!
Intentando a conectar el teléfono en COM38
La conexión con el teléfono falló
No se puede realizar la acción seleccionada
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM31
Modelo seleccionado: GT-I8190L
Puerto ocupado
Searching for a phone. Please wait...
Phone found.
Fecha de creación del firmware: Fri Feb 8 13:19:13 KST 2013
PDA version: I8190LUBAMB1
CSC version: I8190LTFGAMB1
Versión del SW: I8190LUBAMB1
IMEI del teléfono: 358854056030263
Phone SN: R21DA1WYXHX
Android version: 4.1.2 (JZO54K)
IMEI antiguo: 358854-05-603026-3
IMEI nuevo: 358854-85-603026-5
Reading data from phone...
Data read successfully.
Please conect phone to BOX via UART cable.
Searching for a phone. Please wait...
Phone found.
Writing new IMEI. Please wait...
IMEI successfully repaired.
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
. -
Gokuu2008.
User deleted
c1504 done
Welcome to Octoplus/Octopus Suite version 1.2.8
--------------------------------------------------------------------------------
Platform: SONY Qualcomm
Selected model: C1504
Octopus smart card is present.
Initializing Android Debug Bridge...
ADB Server was found. Trying to kill...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Developer options"->"Enable USB debugging" and connect USB
cable...OK
Device serial number: 04d2136e
Device status: ACTIVE
Reading info...
Detected model name: C1504
Firmware version: 11.3.A.0.56
Kernel version: 3.4.0-perf
IMEI: 357420050736932
--------------------------------------------------------------------------------
Connecting to server...OK
Username: fidelvaron
Authorizing...OK
Checking balance...OK
Your balance: 20 credits.
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
--------------------------------------------------------------------------------
Connecting to server...OK
Username: gokuu2008
Authorizing...Failed!
Login error: Wrong password!
--------------------------------------------------------------------------------
Connecting to server...OK
Username: Gokuu2008
Authorizing...OK
Checking balance...OK
Your balance: 10 credits.
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
--------------------------------------------------------------------------------
Platform: SONY Qualcomm
Selected model: C1504OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
Authorizing...OK
Username: Gokuu2008
Authorizing...OK
Checking balance...
Checking operation...OK
Your balance: 10 credits.
To unlock BootLoader for C1504 you need to have 0 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Developer options"->"Enable USB debugging" and connect USB
cable...OK
Device serial number: 04d2136e
Device status: ACTIVE
Reading info...
Detected model name: C1504
Firmware version: 11.3.A.0.56
Kernel version: 3.4.0-perf
IMEI: 357420050736932
Checking IMEI...OK
Checking root access...
Device is not rooted.
Device will be rooted now. Please wait..
Press "Allow/Grant" button on the phone every time when superuser dialog
appears!
Checking root access...Failed!
Could not get root access.
--------------------------------------------------------------------------------
Platform: SONY Qualcomm
Selected model: C1504OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
Authorizing...OK
Username: Gokuu2008
Authorizing...OK
Checking balance...
Checking operation...OK
Your balance: 10 credits.
To unlock BootLoader for C1504 you need to have 0 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Developer options"->"Enable USB debugging" and connect USB
cable...OK
Device serial number: 04d2136e
Device status: ACTIVE
Reading info...
Detected model name: C1504
Firmware version: 11.3.A.0.56
Kernel version: 3.4.0-perf
IMEI: 357420050736932
Checking IMEI...OK
Checking root access...
Press "Allow/Grant" button on the phone every time when superuser dialog
appears!
Device is already rooted.
Reading security area...OK
Backup saved to "F:\Program Files (x86)\Octoplus\Octoplus_Suite\BACKUP
\Sony_C1504_357420050736932_09-04-2014_15-31-45.sec"
Checking security area...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Rebooting device...OK
Phone's Bootloader successfully unlocked!
--------------------------------------------------------------------------------
Platform: SONY Qualcomm
Selected model: C1504
Operation: Repair IMEIOK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
Authorizing...OK
Username: Gokuu2008
Authorizing...OK
Checking balance...
Checking operation...OK
Your balance: 10 credits.
To Repair IMEI for C1504 you need to have 6 credits.
Warning! After Repair IMEI operation, You need to make Factory Reset! Please
backup your data!
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Developer options"->"Enable USB debugging" and connect USB
cable...OK
Device serial number: 04d2136e
Device status: ACTIVE
Reading info...
Detected model name: C1504
Firmware version: 11.3.A.0.56
Kernel version: 3.4.0-perf
IMEI: 357420050736932
Checking IMEI...OK
Checking root access...
Press "Allow/Grant" button on the phone every time when superuser dialog
appears!
Device is already rooted.
Reading security area...OK
Backup saved to "F:\Program Files (x86)\Octoplus\Octoplus_Suite\BACKUP
\Sony_C1504_357420050736932_09-04-2014_15-33-34.sec"
Checking security area...OK
Old IMEI: 357420-05-073693-2
New IMEI: 357420-05-073883-9
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Rebooting device...OK
IMEI successfully repaired!
To complete the operation, please make Factory Reset (select menu
"Settings"->"Backup & reset"->"Factory data reset", press "Reset phone" and
"Erase everything" buttons.
--------------------------------------------------------------------------------
Connecting to server...OK
Username: Gokuu2008
Authorizing...OK
Checking balance...OK
Your balance: 4 credits.
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa. -
.
read codes unlock gb280
Welcome to Octoplus/Octopus Box LG Software version 1.6.2
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM8
Selected baudrate: 921600
Selected model: GB280
Please reconnect battery...
Phone found.
Sending preloader...OK
Sending loader...OK
Flash ID: 8981
Flash type: Intel
Reading info. Please wait...
IMEI: 358730-03-668947-9
Reading codes. Please wait...
--------------------------------------------------------------------------------
NCK : 7410 7334 0081 6606
NSCK : 7950 7536 8754 0809
SPCK : 6160 8462 5176 4365
CCK : 7543 6059 0772 7341
SIM : 6850 4165 9319 3264
MCC: 732
MNC: 10
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*71001#
2. Enter the code.
Disconnected.. -
.
UNLOCK LG E612g
Plataforma: LG Qualcomm
Puerto seleccionado: COM46
Modelo seleccionado: E612g
Lectura de la información...OK
Mode: Normal
Model ID: LGE612g
Firmware compiled date: Apr 19 2012
Firmware compiled time: 06:00:00
Firmware released date: Dec 4 2012
Firmware released time: 05:16:47
Versión de SW: LGE612gAT-00-V10e-SSV-XXX-DEC-04-2012+1
IMEI: 352624-05-445034-2
Dirección de Bluetooth: F0:1C:13:70:B2:4C
Wi-Fi MAC address: E8:92:A4:7E:B9:E3
--------------------------------------------------------------------------------
Plataforma: LG Qualcomm
Puerto seleccionado: COM46
Modelo seleccionado: E612g
Lectura de la información...OK
Mode: Normal
Model ID: LGE612g
Firmware compiled date: Apr 19 2012
Firmware compiled time: 06:00:00
Firmware released date: Dec 4 2012
Firmware released time: 05:16:47
Versión de SW: LGE612gAT-00-V10e-SSV-XXX-DEC-04-2012+1
IMEI: 352624-05-445034-2
Dirección de Bluetooth: F0:1C:13:70:B2:4C
Wi-Fi MAC address: E8:92:A4:7E:B9:E3
Cambio para Modo de Download...OK
Liberación...
To avoid damaging your phone, please, follow these simple precautions:
Use a clean PC (without any installed drivers and software for BlackBerry phones, modem Dashboard software, Phone PC suites software).
Please, make sure the phone's battery is fully charged.
You should not run any other programs or attach new devices to your computer during this operation!
Enviando el cargador...
Searching security area...OK
Lectura de la zona de seguridad...OK
Backup reservado en "E612g_352624054450342_19-07-2014_10-23-39.SEC"
Analyzing security...OK
IMEI: 352624-05-445034-2
Escritura de la zona de seguridad...OK
Switching to Normal mode...
Found model LGE612g at port COM46
Finalizing...OK
Rebooting phone...OK
¡El teléfono está liberado con éxito!
Rebooting phone.... -
.
READ CODES GT360
Plataforma: LG Infineon
Puerto seleccionado: COM8
Velocidad seleccionada: 921600
Modelo seleccionado: GT360
Por favor vuelva a conectar la batería, pulse y mantenga el botón de
encendido...
Teléfono encontrado.
Suelte el botón de encendido.
Enviando el cargador...OK
Lectura de la información...
IMEI: 012136-00-834095-0
Lectura de códigos. Por favor, espere...
--------------------------------------------------------------------------------
Código de desbloqueo: 8565 7660
MCC: 716
MNC: 06
To finish the operation, please perform the following steps:
1. Insert the original SIM card or Motorola Test card and type 2945#*71001
#
2. Enter code. -
.
UNLOCK GU200a
Bienvenido en Octoplus/Octopus Box LG Software version 1.6.2
--------------------------------------------------------------------------------
Plataforma: LG Infineon
Puerto seleccionado: COM8
Velocidad seleccionada: 921600
Modelo seleccionado: GU200a
Por favor vuelva a conectar la batería...
Teléfono encontrado.
Enviando previo cargador...OK
Enviando el cargador...OK
Lectura de la información. Por favor, espere...
Flash ID: EC007A22
Tipo de Flash: Samsung
Desconectado.
Por favor vuelva a conectar la batería...
Teléfono encontrado.
Enviando previo cargador...OK
Enviando el cargador...OK
Lectura de la información. Por favor, espere...
Flash ID: EC007A22
Tipo de Flash: Samsung
IMEI: Undefined
Lectura de la zona de seguridad...OK
Backup reservado en "GU200a-Undefined_19-07-2014_12-05-33.eep"
Escritura de la zona de seguridad...OK
¡El teléfono está liberado con éxito!
Desconectado.. -
.
reset de patron LG P705
y no se borro nada eso si se demor 15min
Plataforma: LG Qualcomm
Puerto seleccionado: COM29
Modelo seleccionado: P705
Lectura de la información...OK
Mode: Normal
Model ID: P705
Firmware compiled date: Mar 05 2012
Firmware compiled time: 07:00:00
Firmware released date: Sep 7 2012
Firmware released time: 23:20:10
Versión de SW: P705-M7227A-V10e-SEP-08-2012-XX
IMEI: 356536-05-501795-1
Dirección de Bluetooth: BC:F5:AC:5B:DF:D2
Wi-Fi MAC address: BC:F5:AC:FE:FF:0B
Cambio para Modo de Download...OK
Resetting Screen Lock...
This process can take about 15 minutes. Please, wait...
Resetting screen lock successfully completed!
Rebooting phone.... -
.
UNLOCK T505
Bienvenido en Octoplus/Octopus Box LG Software version 1.6.2
--------------------------------------------------------------------------------
Plataforma: LG Infineon
Puerto seleccionado: USB
Modelo seleccionado: T505
Desconecte la batería y conecte el cable USB al teléfono...OK
Enviando previo cargador...OK
Enviando el cargador...OK
Initializing flash...OK
Flash ID: ADBA
Flash Vendor: Hynix
Lectura de la información...
IMEI: 357348-04-083732-2
Dirección de Bluetooth: F0:1C:13:9F:29:00
Firmware version: V10a
Locks: Network Lock
MCC=732
MNC=101
Liberación...
Reading EEPROM...OK
Backup reservado en "T505_357348040837322_26-07-2014_14-05-04.EEP"
Lectura de la zona de seguridad...OK
Escritura de la zona de seguridad...OK
Writing EEPROM...OK
¡El teléfono está liberado con éxito!
Desconectado.. -
.
RESET LG A200
selecionando modelo c100
Bienvenido en Octoplus/Octopus Box LG Software version 1.6.2
--------------------------------------------------------------------------------
Plataforma: LG Infineon
Puerto seleccionado: COM8
Modelo seleccionado: C100
¡Para esta operación use el cable COM!
Phone and phone lights should be powered ON
Reinicio...OK. -
.
RESET LG T395
seleccionando modelo T325
--------------------------------------------------------------------------------
Plataforma: LG Infineon
Puerto seleccionado: COM8
Modelo seleccionado: T325
¡Para esta operación use el cable COM!
Phone and phone lights should be powered ON
Reinicio...OK. -
.
READ INFO Y RESET LG C320
Tambien reset con 3845#*320#
--------------------------------------------------------------------------------
Plataforma: LG Qualcomm
Puerto seleccionado: COM56
Modelo seleccionado: C320
Modo: Normal
Modelo del teléfono: LGC320
Versión de SW: LGC320-QSC6270-V10a-OCT-22-2010-XX
IMEI: 354613-04-139263-2
Dirección de Bluetooth: B0:89:91:EF:59:C2
Firmware compiled date: Jun 22 2010
Firmware compiled time: 18:00:00
Firmware released date: Oct 22 2010
Firmware released time: 11:37:01
--------------------------------------------------------------------------------
Plataforma: LG Qualcomm
Puerto seleccionado: COM56
Modelo seleccionado: C320
Reinicio...OK. -
.
-------------------------------------------------------------------------------- RESET LG A180
Tambien reset con 1809#*180#
Plataforma: LG Infineon
Puerto seleccionado: COM8
Modelo seleccionado: A180a
¡Para esta operación use el cable COM!
Phone and phone lights should be powered ON
Reinicio...OK. -
.
FIRST IN THE WORLD WITH OCTOPUS RESET LG C333
Tambien reset con 3845#*333#
Bienvenido en Octoplus/Octopus Box LG Software version 1.6.4
--------------------------------------------------------------------------------
Plataforma: LG Infineon
Puerto seleccionado: COM8
Modelo seleccionado: T325
¡Para esta operación use el cable COM!
Phone and phone lights should be powered ON
Reinicio...OK
Edited by caldasunlockgsm - 17/8/2014, 10:56. -
.
FIRST IN THE WORLD WITH OCTOPUS RESET LG C297
PRIMERA EN EL MUNDO CON OCTOPUS FACTORY RESET LG C297
Tambien reset con 3845#*297#
Adjunto el EEPROM ya desbloqueado
http://localhost/rar/6DfA2YwIba/C297..._15-09-201.html?
Plataforma: LG MTK
15/09/2014 13:57:27 > Puerto seleccionado: COM255
15/09/2014 13:57:27 > Velocidad seleccionada: 921600
15/09/2014 13:57:27 > Modelo seleccionado: C297
15/09/2014 13:57:27 > Please, disconnect battery and connect cable...15/09/2014 13:57:30 > OK
15/09/2014 13:57:30 > Teléfono encontrado.
15/09/2014 13:57:32 > Setting power state...15/09/2014 13:57:33 > OK
15/09/2014 13:57:33 > Enviando el cargador...15/09/2014 13:57:33 > OK
15/09/2014 13:57:33 > Synchronizing with loader...15/09/2014 13:57:33 > OK
15/09/2014 13:57:33 > Detecting NOR flash chip...15/09/2014 13:57:33 > OK
15/09/2014 13:57:33 > Detecting NAND flash chip...15/09/2014 13:57:33 > OK
15/09/2014 13:57:33 > Lectura de la información...15/09/2014 13:57:34 > OK
15/09/2014 13:57:34 > Checking security...15/09/2014 13:57:36 > OK
15/09/2014 13:57:36 > --------------------------------------------------------------------------------
15/09/2014 13:57:36 > IMEI A: 358155-05-175093-3
15/09/2014 13:57:36 > IMEI B: 358155-05-175094-1
15/09/2014 13:57:36 > Dirección de Bluetooth: 30:76:6F:C4:5B:E9
15/09/2014 13:57:36 > NAND flash chip: Hynix
15/09/2014 13:57:36 > NAND size: 128 Mb
15/09/2014 13:57:36 > NAND page size: 2048 b
15/09/2014 13:57:36 > NAND spare size: 64 b
15/09/2014 13:57:36 > NAND pages per block: 64
15/09/2014 13:57:36 > --------------------------------------------------------------------------------
15/09/2014 13:57:36 > Selecting output file...15/09/2014 13:57:39 > OK
15/09/2014 13:57:39 > Destination file: "C297_358155051750933_15-09-2014_13-57-36.EEP"
15/09/2014 13:57:39 > Reading EEPROM...15/09/2014 13:58:30 > OK. -
.
UNLOCK LG E610V
1- Seleccionar la pestaña LG QUALCOMN, seleccionamos modelo
2- Conectar el cell,
3- Seleccionar en Tipo de conexion USB : "Software LG",
4- Luego en "Puerto COM" seleccionar el puerto en donde nos conecto el cell,
5- Presionar el boton "Leer la informacion del telefono"
6- Presionamos "Liberar", no tarda ni 1 minuto y el cell queda liberado.
Plataforma: LG Qualcomm
Puerto seleccionado: COM34
Modelo seleccionado: E610v
Lectura de la información...OK
Mode: Normal
Model ID: LGE610v
Firmware compiled date: Apr 19 2012
Firmware compiled time: 06:00:00
Firmware released date: Feb 11 2013
Firmware released time: 09:37:15
Versión de SW: LGE610vAT-00-V10g-VDF-XXX-FEB-11-2013+0
IMEI: 353584-05-253217-9
Dirección de Bluetooth: 98:D6:F7:D8:F0:A5
Wi-Fi MAC address: 10:68:3F:83:93:9F
Cambio para Modo de Download...OK
Liberación...
Searching security area...OK
Lectura de la zona de seguridad...OK
Backup reservado en "E610v_353584052532179_20-12-2014_17-03-33.SEC"
Analyzing security...OK
IMEI: 353584-05-253217-9
Escritura de la zona de seguridad...OK
Switching to Normal mode...
Found model LGE610v at port COM34
Finalizing...OK
Rebooting phone...OK
¡El teléfono está liberado con éxito!
Rebooting phone....