-
roniscell.
User deleted
IFF JTAG - Samsung GT-i8700 Omnia 7 , Samsung W299 Duos Unbrick - Boot repair suppor
29.07.2011 Samsung GT-i8700 Omnia 7 , Samsung W299 Duos Unbrick – Boot repair supported
Resurrecting Samsung I8700 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung I8700:- Solder JTAG cable to Samsung I8700 JTAG pads;
- Make sure Samsung I8700 is selected in the list of models;
- Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
To enter download mode:- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.
Resurrecting Samsung W299 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung W299:- Solder JTAG cable to Samsung W299 JTAG pads;
- Make sure Samsung W299 is selected in the list of models;
- Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG RevolutionRIFF JTAG -Samsung Galaxy S II Unbrick Support and much more !
29.07.2011 New RIFF JTAG Updates :
- RIFF JTAG Manager v1.34
- RIFF Box firmware v1.26
- RIFF GDB Server v1.04
With new release we added support for new ARM core(s) - Cortex-A9 in single core and multicore configuration.
Project now supports Unicode, so there is Russian and Chinese language available !
JTAG Manager now supports 64bit addressing, thus allowing You to dump large memory chips (eMMC and iNAND) !
New resurrectors DLL-s
- Samsung Galaxy S II (Samsung i9100) Unbrick, Boot repair
- SonyEricsson x10 Unbrick, Boot repair
- Samsung CDMA B119
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution
. -
roniscell.
User deleted
RIFF JTAG - Xperia X8, X10 Mini supported
02.08.2011 RIFF JTAG - SonyEricsson Xperia X8, X10 Mini supported
Whats new today :
SonyEricsson Xperia X8/E15 Unbrick, Boot repair, and NAND Chip Backup/Restore
SonnyEricsson Xperia X10a Mini /E10 Unbrick, Boot repair, and NAND Chip Backup/Restore
USB Broadband Modem ZTE MF627 new CPU ID added to allowed list
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution. -
roniscell.
User deleted
RIFF JTAG - Samsung Galaxy TAB M180s Korean version supported
03.08.2011 Samsung Galaxy Tab M180s Unbrick – Boot Repair supported
Samsung M180S is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in some cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung M180S:- Solder JTAG cable to Samsung M180S JTAG pads;
- Connect USB cable to phone and PC;
- Attach battery connector;
- Make sure Samsung M180S is selected in the list of models;
- Make sure a fixed TCK frequency is selected;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
To enter download mode:- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.
Bug fix update :- Samsung S5830
- Improved resurrection by adding few more zones to be reflashed.
- Fixed issue with NAND chip not being detected (0xAAAA/0xAAAA ID)
- CPU ID 0x303C10E1 added to allowed list
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution
. -
Gokuu2008.
User deleted
RIFF JTAG - JTAG Manager v1.35 released
04.08.2011 JTAG Manager v1.35 released
Whats new :
Added an arbitrary feature “Settings by Code” to the DCC Read/Write page.
Main purpose is to improve support quality for users: via “Settings Code” string a supporter person sees all settings which were set by user on the DCC Read/Write page.
Though, end-user may benefit from this too: Use “Settings Code” string for JTAG Manager to automatically setup all DCC Read/Write settings
Fixed data loss during read and save operations in case there is not enough disk space available to store required amount of data.
(for example reading full on DCC Read/Write page, or saving read full, etc).
Now available disk space checks are performed prior disk write operations.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution. -
roniscell.
User deleted
RIFF JTAG - Samsung Galaxy GIO (S5660) Unbrick - Boot repair supported
23.08.2011 Samsung Galaxy GIO (S5660) Unbrick – Boot repair supported
Samsung S5660 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung S5660 do this:- Solder JTAG cable to Samsung S5660 JTAG pads;
- Insert battery and connect USB cable to phone and PC;
- Make sure Samsung S5660 is selected in the list of models;
- Click Resurrect button;
- Wait few seconds until software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
To enter download mode:- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Down’ and ‘OK’ keys and press Power-On to enter Download Mode;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution
. -
.::nannocell12::..
User deleted
RIFF JTAG - 7 new models added - read inside !
30.08.2011 RIFF JTAG - 7 new models added !
Whats new :
LG Models :
LG GM730
LG TD636
Samsung :
Samsung i5510
Samsung A837
Sierra Wireless
Sierra 597 Compass
Sierra U595
Pantech :
Pantech UM150
Please click "Check For Updates" button in order to download and apply new updates.
RIFF Box – JTAG Revolution
Report Post
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiShare on FacebookTwitterStumble this Post!
. -
roniscell.
User deleted
30.09.2011 RIFF JTAG - New Samsung and CDMA updates !
Whats new :- Added support for Samsung AnyCall m110s
- Added support for Samsung Wave II (S8530)
- Added support for Sungil SXC1080 CDMA Modem
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution. -
josedavido.
User deleted
RIFF JTAG – Samsung Focus (i917) Unbrick, Dead boot repair supported
04.10.2011 Samsung Focus (i917) Unbrick, Dead boot repair supported
Resurrecting Samsung I917 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung I917:
Solder JTAG cable to Samsung I917 JTAG pads;
Make sure Samsung I917 is selected in the list of models;
Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.
. -
roniscell.
User deleted
JTAG Manager Version 1.36, RIFF Box Firmware v1.27 Released,Tegra 2 Support ! ! !
- added fast presets for automatic selection of settings for most common operations on DCC Read/Write page
For this click Settings by Code button and select a desired preset from list and then click Apply Settings.
For example if user selects "Write Full Image into NAND memory" the valid settings on the DCC Read/Write page
for writting full images into devices with NAND memory will be automatically selected
- fixed serious bug which caused resurrector DLLs which do upload data into RAM to upload broken data
For example DLLs which start Downlad Mode directly use this feature.
- added feature to accept text name of memory chip from DCC Loader and display it (currently used to display eMMC memory product name)
- fixed bug for resumming interrupted DCC Read: ifvcurrently cached file size was greater than > 2GB
(that is if read was interrupted on point when there was already more than 2GB of data read) the new reading data was not appended to the readout file end, but instead the file was corrupted.
- fixed bug for saving big files (after reading on DCC Read/Write page): if size exceeded 0x7FFFFFFF bytes JTAG Manager show no free disk space error.
- added TEGRA2 chipset selection in the Target list
- fixed an issue with the resurrection progress bar: in some cases during resurrection operations the progress bar would always stay at 0%.
Firmware 1.27
---------------------------
- added TEGRA2 debugging support (dual-core Cortex-A9)
- added new breakpoint type: "address mismatch" which allows geniune single-stepping on Cortex-A8,A9 (CoreSight) targets
(thus GDB Server can now perform low-level single step commands)
. -
roniscell.
User deleted
07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)
Added support for Samsung Galaxy II, OMAP4430 version supported
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
. -
roniscell.
User deleted
12.10.2011 HTC Desire Z (HTC Vision) Update
Whats new :
Added support for HTC Desire Z (HTC Vision)
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
. -
roniscell.
User deleted
26.10.2011 Samsung Galaxy S Plus (i9001) Unbrick, boot repair supported
Whats new : Samsung Galaxy S Plus (i9001)
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
. -
.
RIFF JTAG - SonyEricsson Unlock/IMEI/TA Repair supported
11.11.2011 SonyEricsson Unlock/IMEI/TA Repair supported
Whats new :
With this release, we now support Unlock, IMEI repair and TA repair for listed SE models.
You can now totally rebuild software in these models, after replacing NAND chip for example. At the moment, we have following models released :
x8
x10
x10 mini
x10 mini pro
Remember that these models can have different names (e10, e15, u20 etc)
Please check up this link for more information
RIFF JTAG – JTAG Manager v1.37, RIFF Box firmware v1.28 released
by admin on Nov.11, 2011, under News
11.11.2011 JTAG Manager v1.37, RIFF Box firmware v1.28 released
Whats new :
JTAG Manager 1.37
—————————
Fixed bug which caused not to report improper firmware version of riff box
(SDK): more functions are now available (exported) for future Resurrector DLLs;
Firmware 1.28
—————————
Added few more H/W script (*.has) instructions;
Added some security extensions for Xperia repair;
. -
ceveboidive.
User deleted
Hi friends
Your website inculudes usefull information. I added your website to Google Reader and i will follow it when i have time. I have a problem. My firefox forever crashing. how can i do?
Best regards....