-
THE FIXCEL
.User deleted
RIFF JTAG – HTC Sensation XE PG5813001 (G18) Unbrick, Unlock, S-Off, IMEI repair supported
by admin on Jun.22, 2012, under News
22.06.2012 RIFF JTAG – HTC Sensation XE PG5813001 (G18) Unbrick, Unlock, S-Off, IMEI repair supported
Repairing bricked HTC Sensation XE (PG5813001) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone and will re-write PDA’s HBOOT version 1.29.0000.
There is option to reflash BOOT and RECOVERY zones.
In addition, you can set S-OFF (unlock HBOOT so you will be able to flash any ROM) by clicking “Make S-OFF” checkbox in the resurrector settings.
To resurrect HTC Sensation (PG5813001):
Solder JTAG cable to HTC Sensation (PG5813001) JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Sensation (PG5813001) is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
. -
.
Hi,
Here are some latest released updates for RIFF Box:
Usual RIFF DLL-s :
Samsung i847
Samsung S7390
Nokia Lumia 625
Samsung i547
HTC HTL22
Gygabite Rio R1
Gygabite G1342
Qualcomm MDM8200 NAND
ZTE T40
Custom PKG-s
Motorola MB886 riffpkg (Updated with pinout and more zones)
HTC One Max riffpkg.
Samsung i9192 MK4 Total Repair (Use it to repair baseband)
HTC One SV PL801000 by Babak Nuri, (Upated, check bellow)
Samsung S6310N Total Repair
HTC 8S PM5910001 Total Repair
Samsung S6310 Total Repair
Samsung S6312 Total Repair (By Progman)
HTC Merge (HTC Lexicon)
Casio G'Zone CA201L
Sony XPeria T (LT30A)
Brava Vega 3
Sony (SE) Xperia Z C6602 by Babak Nuri
HTC OneSV PL80110
Samsung S5283
Andromax U i6c Read/Write PKG
LG SU640
HTC OneM7 U PN071200
Qualcomm MSM8625 eMMC /Generic/
RIFF JTAG Manager v1.56 is required to use these updates.. -
.
RIFF Box New Repair Pack
Hi
New Repair Pack Created By Babak Nuri:
HTC:
Desire X Dual Sim T329w With MID PM661000 Now Supported Hboot "1.12.000.2 and 1.15.000.2Repair Recovery/Kernel/CID/Wlan"
One XL evita_utl Arabic Product With MID PJ835000 Now Supported Hboot "2.10.0000 Repair Recovery/Kernel/CID/Wlan"
Vigor/Rezound With MID PH9810000 Now Supported Both Hboot GB/ICS 2.11.0000 2.27.0000 Repair Recovery/Kernel/CID/Wlan
Nokia:
RM-980 V1 Nokia X Now Supported By RIFF Box For Repair Boot/Bricked Phone
RM-980 V2 Nokia X Now Supported By RIFF Box For Repair Boot/Bricked Phone
Rm1030 V1 Nokia Xl Now Supported By RIFF Box For Repair Boot/Bricked Phone(This is Beta)
Samsung :
GT-I9200 Galaxy Mega Now Supported latest 4.4.2 Version
GT-P3100 Galaxy Tab2 Now Supported 16GB eMMC
RIFF Box New Repair Pack Released
12/05/2014 Released :
Sony:
C6603 Xperia Z Now Supported With Version 4.4.4 Repair Boot/Bricked Phone(First in The World)
C6603/C6602 Xperia Z Now Supported For Repair Imei null/Baseband Unknown only if have SW Problem(First in The World)
HTC:
Sensation XE PG5813001 now Supported Both MID 0x105310E1 & 0x104210E1 Repair Boot/Bricked/Recovery/Kernel/CID/Wlan
Ruby/Amaze PH8510000/PH8511000 Now Supported Safe Repair Without Damaged SimLock/IMSI With 4 Different Hboot ENG ,Repair Boot/Brciked/Recovery/Kernel/CID/Wlan (First in The World)
Samsung :
GT-I9190 Galaxy S4 Mini Now Supported For Repair Boot/Bricked/EFS/Modem Version XXUBNA1 / UBUBNA3 / UBUBNB1 / UBUBND1 ================================================== =======
12/10/2014 Released :
Samsung:
GT-I9205 Galaxy Mega LTE Latest 4.4.2 Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem/ROM2
Sony:
Xperia E C1605 Now Supported With RIFF Box For Repair Boot/Recovery/Kernel
Updated Old Package :
Nokia X Rm-1030 Added JTAG Photo
Smasung P3100 Minor Bug Fixed. -
.
RIFF Box New Repair Pack
03/Feb/2015 Released :
Samsung:
SGH-T999v Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem With Support 4.3 and 4.42 Version
SGH-I747U Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem With Support 4.3 Version
SM-G730W8 Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem With Support 4.2.2 and 4.4.2 Version
Test Released Version For :
SGH-S5302 Galaxy Pocket Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem
SGH-S5303 Galaxy Pocket Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem. -
.
12/05/2015 Released New Update For RIFF Box:
HTC_One_Mini_PO5821000
Huawei_Y210D
Samsung_Galaxy_Mega_I9205_Version_4.4.2
Samsung_I8552_Galaxy_Win. -
.
3.7.2015 Released New Update For RIFF Box :
1-HTC One M7_U PN07120000 Safe Repair
2-HTC One M7_U PN07140000 Safe Repair
Samsung SGH-I9515 Value Edition
Samsung SGH-I337 Supported 4.4.2/4.4.4/5.0.1
Sony Xperia J ST-26i Repair Booltoader/Recovery. -
.
11/07/2015 Released New Update For RIFF Box :
HTC One Dual Sim 802e (PN0771000) Now Supported Repair Bootloader/CID-Wlan/Recovery/Kernel/HTC Security/
HTC One Dual Sim 802w (PN0771000) Now Supported Repair Bootloader/CID-Wlan/Recovery/Kernel/HTC Security/
HTC One Dual Sim 802d (PN0751000) Now Supported Repair Bootloader/CID-Wlan/Recovery/Kernel/HTC Security/
HTC One Max (OP3P52000) Now Supported Repair Bootloader/CID-Wlan/Recovery/Kernel/HTC Security/
Sony_Xperia_T_LT30p Now Supported Repair Bootloader/Recovery-Kernel. -
.
Important information related to RIFF Box eMMC support
Hello dear users !
This topic will serve as initial guide for RIFF Box eMMC ISP/Direct functionality. This is not regular update, but rather a major upgrade.
As such, it will come free for all RIFF Boxes registered in last 6 months, and of course for all new RIFF Box customers.
To prepare everything on Your side for this upgrade, You'll need the following:
RJ45 cable
2x100 ohms resistors
External source for VCC and VCCQ (Optional)
Moorc adapters (Optional)
Activation credits (If Your box is older than 6 months)
RJ45 cable is required to connect RIFF Box to eMMC as RIFF Box RJ45 port is used for this function.
2x100 Ohms resistors are required as pull up, to increase signal levels and improve stability.
Extarnal source for VCC and VCCQ is required in case that You don't want to open Your RIFF Box, in order to connect RIFF Box internal VCC voltage source. We know that there are already some adapters on market, which offer this function.
Moorc adapters are well known, and they offer best at price range.
Activation credits You can get in exchange for some money. We have too many of those, and we will be happy to exchange some of them to real money.
RIFF Box RJ45 port pinout:
1-NC
2-SD_CLK
3-SD_DAT0
4-SD_CMD
5-NC
6-NC
7-NC
8-GND
VCC pin is located on RIFF Box motherboard, bottom side. You can locate it if You check attached photo.
Pull up resistors should be connected from VCCQ to both SD_CMD and SD_DAT0 lines.. -
.
RIFF-Box eMMC JTAG Manager [BETA 4]
JTAG Manager [BETA 4]
- Added eMMC Firmware Reading option (firmware is stored in *.riffemmcfw format)
For firmware read need to select chip from the list
- *.riffemmcfw eMMC firmware files are now used by RIFF for firmware updates (plain binary files are supported too)
- Added elapsed time info for eMMC firmware update stages
- Added eMMC Testpoint info displaying (info files must be downloaded from support and are located in the JTAG Manager's 'Documents' folder.
- Added CMD42 Lock/Unlock functionality for eMMC. User can set/change/remove password to protect/unprotect (lock/unclock) the User Area Partition
- Added the User Area Partition Forced Erase to erase Locked User Area Partition and to reset Device lock/unlock state and password (CMD42's consequences)
- Added Samsung Factory Erase which erases and re-formats the Samsung eMMC chips.
---
Firmware 1.38.6b
- Improved one thing in the emmc communication
- Added the CMD42 Lock/Unlock/Pasword reset features
- Added Forced erase of locked User Area Partition
- Added Samsung eMMC Factory Format
More Info By Click On "SUpport Forum" in Box Services on JTAG Manager. -
.
Here is JTAG Manager v1.58 with ISP/Direct eMMC support.
To use it, please prepare Your RIFF Box installation folder:
- Rename JTAG Manager v1.56 so You can continue using it if Your account is expired
- Backup "Useful plugins" folder content because old plugins are incompatible with new Exe, and old exe is incompatible with new plugins.
- Start v1.58 exe and download license (If Your account is not expired)
- Update Box firmware to v1.38
- Download new plugins
Old server will be online for some weeks, so users who don't need or cannot acquire new license can get license if they need it.
There will be more info in short time.
JTAG Manager 1.58
---------------------------
- added direct eMMC Access Interface on the RIFFBOX RJ-45 port (check pinout picture for CMD, CLK, DAT0, etc pins positions).
- added eMMC/SD Access page for Read/Write operations on eMMC/SD card via direct interface
- added eMMC/SD Advanced dialog which allows to perform advanced operations with eMMC/SD cards
(reading info, browsing through OCR, CID, CSD (and EXT_CSD for eMMC only) registers' fields, edit separate fields and writting back to card, reading/writting eMMC card's MCU's internal firmware, etc)
- added convenient information presentation for specific eMMC chips: pinouts for testpoints, manuals how to use testpoints to resurrect dead eMMC, etc). These INFO files (*.riffinfo) are stored in JTAG Manager's Documents folder and can be downloaded via generic <check for Updates> operation.
- added eMMC Firmware Update option
- added eMMC Firmware Reading option (firmware is stored in *.riffemmcfw format)
For firmware read need to select chip from the list
- *.riffemmcfw eMMC firmware files are now used by RIFF for firmware updates (plain binary files are supported too)
- added elapsed time info for eMMC firmware update stages
- added eMMC Testpoint info displaying (info files must be downloaded from support and are located in the JTAG Manager's 'Documents' folder.
- added CMD42 Lock/Unlock functionality for eMMC. User can set/change/remove password to protect/unprotect (lock/unclock) the User Area Partition
- added the User Area Partition Forced Erase to erase Locked User Area Partition and to reset Device lock/unlock state and password (CMD42's consequences)
- added Samsung Factory Erase which erases and re-formats the Samsung eMMC chips.
- fixed bug displaying wrong SD card size for cards capacity less than 2GB
- few small improvements and bug fixes
Firmware 1.38
- added direct eMMC Access Interface functionality
- improved one thing in the emmc communication
- added the CMD42 Lock/Unlock/Pasword reset features
- added Forced erase of locked User Area Partition
- added Samsung eMMC Factory Formwat
- fixed bug for SD card support
- eMMC firmware update feature added. -
.
Hello,
Here is list of latest RIFF Box updates:
- RIFF JTAG Manager v1.64:
Fixed Password Recovery feature
(Authorization code sending feature was broken, due to wrongly configured timeout)
Fixed bug which caused JTAG Manager crash after clean install and successive downloading of a DLL file while there were no PKG files installed.
Improved login interface - the registered email is automatically filled in to the Login field.
(Remember that You can use both registered user name or e-mail as login. With this feature Your registered e-mail address is automatically inserted in login dialog form, so You just have to type in Your password)
JTAG Manager Main Window Width is increased to increase the width of Resurrector Name fields
Please read description carefully !
User contributed Riffpkg (Repair packs made with Package Editor) uploaded to Official RIFF Box Update Server:
www.riffbox.org/downloads/packs.jpg. -
.
RIFF Box Updates, 06.02.2017
Hello,
We just uploaded following DLL-s to support storage:
HTC ONE M8w 4G LTE
HTC Desire Eye 4G LTE EMEA M910n
To download and install these files, simply click "Check for updates" button in JTAG Manager, and select new files for download.. -
.
RIFF JTAG Box updates, 20.02.2017
Today's updates:
Samsung SM-A300F Galaxy A3 LTE
Samsung SM-A500F Galaxy A5 LTE
HTC One M8 ULCA (AT&T)
To download these files click "Check for Updates" button in "Box Service" TAB. -
.
RIFF JTAG Manager v1.66, RIFF II Firmware v1.42
Hello,
Please read this carefully if You are RIFF Box v2 user:
RIFF JTAG Manager 1.66
---------------------------
- RIFFBOX2 support for new connection mode is added (for new Drivers)
- Due to new drivers Read/Write speeds via eMMC interface increased 10 times and more
- Read/Write speed is now shown in MB/s
- Firmware Update process adjusted for slow networks (Indonesia, Bangladesh, India . . .)
RIFF Box Firmware v1.42
---------------------------
- RIFFBOX connection mode is optimized for better speed, it is no more the CDC.
The data transfer speeds are increased more than 10 times.
- Fixed bug in handling the erroneous situations during eMMC data read operations.. -
.
JTAG Manager 1.67
---------------------------
- Fixed bug (which is related to RIFFBOX2 only), which caused box connection error, after this operation: "Setting new JTAG/eMMC License to the RIFFBOX."
RIFF Box Firmware v1.43
---------------------------
- Fixed bug related to RIFF Box v1 eMMC detection
- Fixed bug related to RIFF Box v2 USB 2.0 ports enumeration
New RIFF Box v2 drivers:
----------------------------
- Drivers from year 2014 (x86 and x64)
Instructions for users with V2 box and "Device cannot start, error code 10" problem:.
FORO EXCLUSIVO UPDATES RIFF |
