Aquí Procesos Exitosos Easy Jtag !

« Older   Newer »
 
  Share  
.
  1. .::Braycel::.
    view post Posted on 13/5/2013, 01:45
        +1   -1
     
    .

    User deleted
    i917 write fullflash succesfully done

    CODE
    EasyJtag Suite ver. 1.0.18.2 started.
    For support and updates visit http://easy-jtag.com
    I/O Level set to : 2600 mV
    Box S/N: ********** ,SW Ver.: 01.42
    Connecting to Target...
    JTAG device: QSD8250.
    CPU IDCODE : 0x1BA000E1 Mfg.: 0x070, Part: 0xba00, Ver.: 0x1
    CPU Manufacturer: QUALCOMM , CPU Name: QSD8250 SLAVE
    JTAG device: QSD8250.
    CPU IDCODE : 0x202400E1 Mfg.: 0x070, Part: 0x0240, Ver.: 0x2
    CPU Manufacturer: QUALCOMM , CPU Name: QSD8250
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:002C:00B3 'NAND 1GiB 1.8V 16-bit (Micron)' found
    NAND geometry: Blocks:00002000, Page size:2048 bytes , Block size:64 pages
    Writing NAND from file...D:\1GB_Z3X.bin
    Lock file not found D:/1GB_Z3X.lock
    NAND Write OK! Wrote up to offset 0x40000000 in 3846.583008s (281.118 KiB/s)
     
    Top
    .
  2. .::Braycel::.
    view post Posted on 14/5/2013, 00:28
        +1   -1
     
    .

    User deleted
    S5230 easy repair boot...

    CODE
    Checking repair data...
    For support and updates visit http://easy-jtag.com
    I/O Level set to : 3000 mV
    Box S/N: 0D0D******* ,SW Ver.: 01.42
    Connecting to Target...
    JTAG device: BCM2133
    CPU IDCODE detected: 0x07926F0F
    Manufacturer: 0x787, Part: 0x7926, Version: 0x0
    Halting CPU...
    Starting target communication...
    Detecting nand memory parameters of bank (0) ...
    NAND flash device ID:00EC:00BA 'NAND 256MiB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00000800, Page size:2048 bytes , Block size:64 pages
    NAND Writing BOOT...
    NAND Write OK! Wrote up to offset 0x00080000 in 4,921875s (107,276 KiB/s)
    Repair DONE! Restarting phone...
    All Done.
    Box are disconnected!
     
    Top
    .
  3. .:: Saulcell ::.
    view post Posted on 31/7/2013, 21:17
        +1   -1
     
    .

    User deleted
    I9000 Easy Repair Boot Done

    CODE
    EasyJtag Suite ver.: 1.0.54.0 started.
    Operating system ver.: Windows 7 (build 7601, Service Pack 1).
    For support and updates visit http://easy-jtag.com
    Initialising: SAMSUNG GT-I9000 Config ver.:1.00
    I/O Level set to : 2800 mV
    Box S/N: 0E0E0F14F3059C50 ,FW Ver.: 01.47
    Connecting to Target...
    JTAG device: S5PC110
    CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
    CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
    Halting CPU...
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
    NAND Writing BOOT...
    NAND Write OK! Elapsed time: 2.402404s (109.890 KiB/s)
    NAND Writing PIT...
    NAND Write OK! Elapsed time: 1.138802s (231.823 KiB/s)
    NAND Writing SBL1...
    NAND Write OK! Elapsed time: 16.941629s (77.915 KiB/s)
    NAND Writing SBL2...
    NAND Write OK! Elapsed time: 16.941629s (77.915 KiB/s)
    NAND Writing UPCH...
    NAND Write OK! Elapsed time: 0.904802s (1167.106 KiB/s)
    All Done.
     
    Top
    .
  4. dianacaseres
    view post Posted on 3/9/2015, 00:42
        +1   +1   -1
     
    .

    User deleted
    i9300 no boot reparación direct emmc




    Z3X EasyJtag Software ver. 2.0.4.0
    Loading eMMC Addon Firmware... IO: 3300 mV
    Box S/N: 0700100B636E8D0E, ,FW Ver.: 01.52
    CMD Pullup Level:773 mV
    CMD Active Level:2103 mV
    eMMC Device Information
    EMMC CID : 1501003030303030305620110726589C

    EMMC CSD : 902701320F5903FFF6DBFFEF8A404022

    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 05/2005 Rev.0x56
    EMMC NAME: 000000 , S/N: 537986854
    EMMC NAME (HEX): 30303030303000
    EMMC ROM1 (Main User Data) Capacity: 16384 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    Extended CSD rev 1.5 (MMC 4.41)

    Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
    Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
    Backup saved: 000000_ 537986854_20150803_1756.extcsd
    Done.

    Running:SAMSUNG: MoviNAND Reset + Format...
    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:773 mV
    CMD Active Level:2103 mV
    EMMC ROM2/3 (Boot Partitions) Capacity: 512 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Sending Internal Reconfiguration Request...
    Waiting configuration Apply!
    Restoring configuration...
    EMMC ROM2/3 (Boot Partitions) Capacity: 512 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Wiping Card... Please do not touch it!
    Please don't forget to repair extCSD from backup!
    Done.

    Running:SAMSUNG: MoviNAND Factory Reset...
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:773 mV
    CMD Active Level:2103 mV
    Sending Smart Wipe Request...
    Wiping Card... Please do not touch it!
    Please don't forget to repair extCSD from backup!
    Done.

    Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:773 mV
    CMD Active Level:2103 mV
    Repair VTU00M eMMC:
    Entering repair mode 1...
    Success!
    Erasing repair area...
    Success!
    Writing repair area...
    Success!
    Exit repair mode 1...
    Success
    NOTE: This stage was reapir only eMMC NAME , not wear leveling data!
    NOTE: Repair Stage 2 must be done to make eMMC repair completely!
    Please, Reconnect eMMC power lines and press 'VTU00M Repair' again
    Done.

    Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:773 mV
    CMD Active Level:2103 mV
    Repair VTU00M eMMC:
    Entering repair mode 2...
    Success!
    Erasing repair area...
    Success!
    Writing repair area...
    Success
    Exit repair mode 2...
    Success
    EMMC repair Done , Reconect eMMC and check S.M.A.R.T Report.
    Please don't forget to repair extCSD from backup!
    Please don't forget to configure BOOT sizes!

    Z3X EasyJtag Software ver. 2.0.4.0
    Loading eMMC Addon Firmware... IO: 3300 mV
    Box S/N: 0700100B636E8D0E, ,FW Ver.: 01.52
    CMD Pullup Level:794 mV
    CMD Active Level:2392 mV
    eMMC Device Information
    EMMC CID : 15010056545530304DF1CE3450E24FB8

    EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C

    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 04/2012 Rev.0xF1
    EMMC NAME: VTU00M , S/N: 3459535074
    EMMC NAME (HEX): 56545530304D00
    EMMC ROM1 (Main User Data) Capacity: 15028 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    Extended CSD rev 1.6 (MMC 4.5)

    Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
    Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
    Backup saved: VTU00M_3459535074_20150803_1800.extcsd
    Done.

    Running:SAMSUNG: MoviNAND Reset + Format...
    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2392 mV
    EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Sending Internal Reconfiguration Request...
    Waiting configuration Apply!
    Restoring configuration...
    EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Wiping Card... Please do not touch it!
    Please don't forget to repair extCSD from backup!
    Done.

    Running:SAMSUNG: MoviNAND Factory Reset...
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2392 mV
    Sending Smart Wipe Request...
    Wiping Card... Please do not touch it!
    Please don't forget to repair extCSD from backup!
    Done.

    Running:Change BOOT CONFIG...
    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2392 mV
    Writing eMMC Register...
    Written: REG : 179 VAL :48
    Done.

    Running:Change BOOT WIDTH...
    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2392 mV
    Writing eMMC Register...
    Written: REG : 177 VAL :1
    Done.

    Z3X EasyJtag Software ver. 2.0.4.0
    Loading eMMC Addon Firmware... IO: 3300 mV
    Box S/N: 0700100B636E8D0E, ,FW Ver.: 01.52
    CMD Pullup Level:794 mV
    CMD Active Level:2402 mV
    eMMC Device Information
    EMMC CID : 15010056545530304DF1CE3450E24FB8

    EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C

    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 04/2012 Rev.0xF1
    EMMC NAME: VTU00M , S/N: 3459535074
    EMMC NAME (HEX): 56545530304D00
    EMMC ROM1 (Main User Data) Capacity: 15028 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    Extended CSD rev 1.6 (MMC 4.5)

    Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
    Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
    Backup saved: VTU00M_3459535074_20150803_1802.extcsd
    Done.

    Running:SAMSUNG: MoviNAND Reset + Format...
    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2402 mV
    EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Sending Internal Reconfiguration Request...
    Waiting configuration Apply!
    Restoring configuration...
    EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    Wiping Card... Please do not touch it!
    Please don't forget to repair extCSD from backup!
    Done.

    Running:SAMSUNG: MoviNAND Factory Reset...
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2402 mV
    Sending Smart Wipe Request...
    Wiping Card... Please do not touch it!
    Please don't forget to repair extCSD from backup!
    Done.

    Running:Repair extCSD...
    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2402 mV
    Writing...
    Done.

    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2402 mV
    Input file : E:\GSM\Firmware - Alo_Celular\easy jtag\9. Easy Jtag files\Samsung\GT-I9300\Dump\EMMC_ROM2_00000000_00200000.bin
    Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
    Done. Write Speed: 711 kB/s

    Z3X EasyJtag Software ver. 2.0.4.0
    Skip loading eMMC Addon Firmware
    CMD Pullup Level:794 mV
    CMD Active Level:2402 mV
    Input file : E:\GSM\Firmware - Alo_Celular\easy jtag\9. Easy Jtag files\Samsung\GT-I9300\Dump\EMMC_ROM1_00000000_20000000.bin
    Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
    Done. Write Speed: 2363 kB/s

    Z3X EasyJtag Software ver. 2.0.4.0
    Loading eMMC Addon Firmware... IO: 3300 mV
    Box S/N: 0700100B636E8D0E, ,FW Ver.: 01.52
    CMD Pullup Level:783 mV
    CMD Active Level:2392 mV
    eMMC Device Information
    EMMC CID : 15010056545530304DF1CE3450E24FB8

    EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C

    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 04/2012 Rev.0xF1
    EMMC NAME: VTU00M , S/N: 3459535074
    EMMC NAME (HEX): 56545530304D00
    EMMC ROM1 (Main User Data) Capacity: 15028 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    Extended CSD rev 1.6 (MMC 4.5)

    Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
    Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
    Backup saved: VTU00M_3459535074_20150803_1810.extcsd
    Done.
     
    Top
    .
3 replies since 13/5/2013, 01:45   270 views
  Share  
.

EASY-JTAG
Create your forum and your blog! · Top Forum · Categories · Help · Status · Contacts · Powered by ForumCommunity