-
jonson86.
User deleted
FORMAT FULL
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) TOSIBA 0x303034473930
EMMC FW VERSION: 51:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
High speed disabled by user, continue with this settings.
Starting phone format, wait!
FORMAT EMMC FLASH : BEGIN: 0xc00000 - LEN: 0xeb880000
All done.
FULL FLASH
Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: MT6582
Exe version: NCKDongle AndroidMTK 2.5.7.5
Scenario: [1]Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) TOSIBA 0x303034473930
EMMC FW VERSION: 51:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM12)
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x3e100000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x45f00000 - LEN: 0xa5080000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done..